btexmms/0040775000076400007640000000000007543653761011231 5ustar nikenikebtexmms/configure.in0100664000076400007640000000120407543647336013535 0ustar nikenikednl Process this file with autoconf to produce a configure script. AC_INIT(Makefile.am) AM_INIT_AUTOMAKE(btexmms, 0.4) AC_PROG_CC AC_PROG_INSTALL AM_PROG_LIBTOOL AM_PATH_GLIB(1.2.0, , AC_MSG_ERROR([*** GLIB >= 1.2.0 not installed - please ins tall first ***])) AM_PATH_GTK(1.2.0, , AC_MSG_ERROR([*** GTK+ >= 1.2.0 not installed - please inst all first ***])) AM_PATH_XMMS(1.0.0, , AC_MSG_ERROR([*** XMMS >= 1.0.0 not installed - please ins tall first ***])) plugindir=$XMMS_INPUT_PLUGIN_DIR AC_SUBST(plugindir) CFLAGS="$CFLAGS -Wall -D_REENTRANT `gtk-config --cflags`" AC_OUTPUT(Makefile src/Makefile ) echo "Enjoy" btexmms/Makefile.am0100664000076400007640000000014607543125113013244 0ustar nikenikeSUBDIRS = src EXTRA_DIST = AUTHORS COPYING ChangeLog INSTALL README TODO AUTOMAKE_OPTIONS = foreign btexmms/configure0100775000076400007640000062534007543647420013142 0ustar nikenike#! /bin/sh # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. # Defaults: ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help --enable-shared[=PKGS] build shared libraries [default=yes]" ac_help="$ac_help --enable-static[=PKGS] build static libraries [default=yes]" ac_help="$ac_help --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" # Find the correct PATH separator. Usually this is `:', but # DJGPP uses `;' like DOS. if test "X${PATH_SEPARATOR+set}" != Xset; then UNAME=${UNAME-`uname 2>/dev/null`} case X$UNAME in *-DOS) lt_cv_sys_path_separator=';' ;; *) lt_cv_sys_path_separator=':' ;; esac PATH_SEPARATOR=$lt_cv_sys_path_separator fi # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` ;; esac echo=${ECHO-echo} if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null && echo_test_string="`eval $cmd`" && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL $0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL $0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "$0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" fi ac_help="$ac_help --disable-libtool-lock avoid locking (might break parallel builds)" ac_help="$ac_help --with-pic try to use only PIC/non-PIC objects [default=use both]" ac_help="$ac_help --with-glib-prefix=PFX Prefix where GLIB is installed (optional)" ac_help="$ac_help --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)" ac_help="$ac_help --disable-glibtest Do not try to compile and run a test GLIB program" ac_help="$ac_help --with-gtk-prefix=PFX Prefix where GTK is installed (optional)" ac_help="$ac_help --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)" ac_help="$ac_help --disable-gtktest Do not try to compile and run a test GTK program" ac_help="$ac_help --with-xmms-prefix=PFX Prefix where XMMS is installed (optional)" ac_help="$ac_help --with-xmms-exec-prefix=PFX Exec prefix where XMMS is installed (optional)" # Initialize some variables set by options. # The variables have the same names as the options, with # dashes changed to underlines. build=NONE cache_file=./config.cache exec_prefix=NONE host=NONE no_create= nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= target=NONE verbose= x_includes=NONE x_libraries=NONE bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' sharedstatedir='${prefix}/com' localstatedir='${prefix}/var' libdir='${exec_prefix}/lib' includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 ac_prev= for ac_option do # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi case "$ac_option" in -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; *) ac_optarg= ;; esac # Accept the important Cygnus configure options, so we can diagnose typos. case "$ac_option" in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) bindir="$ac_optarg" ;; -build | --build | --buil | --bui | --bu) ac_prev=build ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) build="$ac_optarg" ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) cache_file="$ac_optarg" ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) datadir="$ac_optarg" ;; -disable-* | --disable-*) ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` eval "enable_${ac_feature}=no" ;; -enable-* | --enable-*) ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } fi ac_feature=`echo $ac_feature| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "enable_${ac_feature}='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) exec_prefix="$ac_optarg" ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; -help | --help | --hel | --he) # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat << EOF Usage: configure [options] [host] Options: [defaults in brackets after descriptions] Configuration: --cache-file=FILE cache test results in FILE --help print this message --no-create do not create output files --quiet, --silent do not print \`checking...' messages --version print the version of autoconf that created configure Directory and file names: --prefix=PREFIX install architecture-independent files in PREFIX [$ac_default_prefix] --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX [same as prefix] --bindir=DIR user executables in DIR [EPREFIX/bin] --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] --libexecdir=DIR program executables in DIR [EPREFIX/libexec] --datadir=DIR read-only architecture-independent data in DIR [PREFIX/share] --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] --sharedstatedir=DIR modifiable architecture-independent data in DIR [PREFIX/com] --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] --libdir=DIR object code libraries in DIR [EPREFIX/lib] --includedir=DIR C header files in DIR [PREFIX/include] --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] --infodir=DIR info documentation in DIR [PREFIX/info] --mandir=DIR man documentation in DIR [PREFIX/man] --srcdir=DIR find the sources in DIR [configure dir or ..] --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names EOF cat << EOF Host type: --build=BUILD configure for building on BUILD [BUILD=HOST] --host=HOST configure for HOST [guessed] --target=TARGET configure for TARGET [TARGET=HOST] Features and packages: --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) --x-includes=DIR X include files are in DIR --x-libraries=DIR X library files are in DIR EOF if test -n "$ac_help"; then echo "--enable and --with options recognized:$ac_help" fi exit 0 ;; -host | --host | --hos | --ho) ac_prev=host ;; -host=* | --host=* | --hos=* | --ho=*) host="$ac_optarg" ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) includedir="$ac_optarg" ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) infodir="$ac_optarg" ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) libdir="$ac_optarg" ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) libexecdir="$ac_optarg" ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) localstatedir="$ac_optarg" ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) mandir="$ac_optarg" ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) oldincludedir="$ac_optarg" ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) prefix="$ac_optarg" ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) program_prefix="$ac_optarg" ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) program_suffix="$ac_optarg" ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ | --program-transfo | --program-transf \ | --program-trans | --program-tran \ | --progr-tra | --program-tr | --program-t) ac_prev=program_transform_name ;; -program-transform-name=* | --program-transform-name=* \ | --program-transform-nam=* | --program-transform-na=* \ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) program_transform_name="$ac_optarg" ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) sbindir="$ac_optarg" ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) sharedstatedir="$ac_optarg" ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) site="$ac_optarg" ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) srcdir="$ac_optarg" ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) sysconfdir="$ac_optarg" ;; -target | --target | --targe | --targ | --tar | --ta | --t) ac_prev=target ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) target="$ac_optarg" ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; -version | --version | --versio | --versi | --vers) echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` case "$ac_option" in *=*) ;; *) ac_optarg=yes ;; esac eval "with_${ac_package}='$ac_optarg'" ;; -without-* | --without-*) ac_package=`echo $ac_option|sed -e 's/-*without-//'` # Reject names that are not valid shell variable names. if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } fi ac_package=`echo $ac_package| sed 's/-/_/g'` eval "with_${ac_package}=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) x_includes="$ac_optarg" ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) x_libraries="$ac_optarg" ;; -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } ;; *) if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then echo "configure: warning: $ac_option: invalid host type" 1>&2 fi if test "x$nonopt" != xNONE; then { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } fi nonopt="$ac_option" ;; esac done if test -n "$ac_prev"; then { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } fi trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 # File descriptor usage: # 0 standard input # 1 file creation # 2 errors and warnings # 3 some systems may open it to /dev/tty # 4 used on the Kubota Titan # 6 checking for... messages and results # 5 compiler messages saved in config.log if test "$silent" = yes; then exec 6>/dev/null else exec 6>&1 fi exec 5>./config.log echo "\ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. " 1>&5 # Strip out --no-create and --no-recursion so they do not pile up. # Also quote any args containing shell metacharacters. ac_configure_args= for ac_arg do case "$ac_arg" in -no-create | --no-create | --no-creat | --no-crea | --no-cre \ | --no-cr | --no-c) ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; *) ac_configure_args="$ac_configure_args $ac_arg" ;; esac done # NLS nuisances. # Only set these to C if already set. These must not be set unconditionally # because not all systems understand e.g. LANG=C (notably SCO). # Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! # Non-C LC_CTYPE values break the ctype check. if test "${LANG+set}" = set; then LANG=C; export LANG; fi if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi # confdefs.h avoids OS command line length limits that DEFS can exceed. rm -rf conftest* confdefs.h # AIX cpp loses on an empty file, so make sure it contains at least a newline. echo > confdefs.h # A filename unique to this package, relative to the directory that # configure is in, which we can look for to find out if srcdir is correct. ac_unique_file=Makefile.am # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. ac_prog=$0 ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } else { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } fi fi srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then echo "loading site script $ac_site_file" . "$ac_site_file" fi done if test -r "$cache_file"; then echo "loading cache $cache_file" . $cache_file else echo "creating cache $cache_file" > $cache_file fi ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross ac_exeext= ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then ac_n= ac_c=' ' ac_t=' ' else ac_n=-n ac_c= ac_t= fi else ac_n= ac_c='\c' ac_t= fi ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break fi done if test -z "$ac_aux_dir"; then { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } fi ac_config_guess=$ac_aux_dir/config.guess ac_config_sub=$ac_aux_dir/config.sub ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:743: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 echo "configure:796: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "$*" != "X $srcdir/configure conftestfile" \ && test "$*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". { echo "configure: error: ls -t appears to fail. Make sure there is not a broken alias in your environment" 1>&2; exit 1; } fi test "$2" = conftestfile ) then # Ok. : else { echo "configure: error: newly created file is older than distributed files! Check your system clock" 1>&2; exit 1; } fi rm -f conftest* echo "$ac_t""yes" 1>&6 if test "$program_transform_name" = s,x,x,; then program_transform_name= else # Double any \ or $. echo might interpret backslashes. cat <<\EOF_SED > conftestsed s,\\,\\\\,g; s,\$,$$,g EOF_SED program_transform_name="`echo $program_transform_name|sed -f conftestsed`" rm -f conftestsed fi test "$program_prefix" != NONE && program_transform_name="s,^,${program_prefix},; $program_transform_name" # Use a double $ so make ignores it. test "$program_suffix" != NONE && program_transform_name="s,\$\$,${program_suffix},; $program_transform_name" # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 echo "configure:853: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftestmake <<\EOF all: @echo 'ac_maketemp="${MAKE}"' EOF # GNU make sometimes prints "make[1]: Entering...", which would confuse us. eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yes else eval ac_cv_prog_make_${ac_make}_set=no fi rm -f conftestmake fi if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$ac_t""yes" 1>&6 SET_MAKE= else echo "$ac_t""no" 1>&6 SET_MAKE="MAKE=${MAKE-make}" fi PACKAGE=btexmms VERSION=0.4 if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } fi cat >> confdefs.h <> confdefs.h <&6 echo "configure:899: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (aclocal --version) < /dev/null > /dev/null 2>&1; then ACLOCAL=aclocal echo "$ac_t""found" 1>&6 else ACLOCAL="$missing_dir/missing aclocal" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 echo "configure:912: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (autoconf --version) < /dev/null > /dev/null 2>&1; then AUTOCONF=autoconf echo "$ac_t""found" 1>&6 else AUTOCONF="$missing_dir/missing autoconf" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 echo "configure:925: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (automake --version) < /dev/null > /dev/null 2>&1; then AUTOMAKE=automake echo "$ac_t""found" 1>&6 else AUTOMAKE="$missing_dir/missing automake" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 echo "configure:938: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (autoheader --version) < /dev/null > /dev/null 2>&1; then AUTOHEADER=autoheader echo "$ac_t""found" 1>&6 else AUTOHEADER="$missing_dir/missing autoheader" echo "$ac_t""missing" 1>&6 fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 echo "configure:951: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if (makeinfo --version) < /dev/null > /dev/null 2>&1; then MAKEINFO=makeinfo echo "$ac_t""found" 1>&6 else MAKEINFO="$missing_dir/missing makeinfo" echo "$ac_t""missing" 1>&6 fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:969: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:999: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then ac_prog_rejected=yes continue fi ac_cv_prog_CC="cc" break fi done IFS="$ac_save_ifs" if test $ac_prog_rejected = yes; then # We found a bogon in the path, so make sure we never use it. set dummy $ac_cv_prog_CC shift if test $# -gt 0; then # We chose a different compiler from the bogus one. # However, it has the same basename, so the bogon will be chosen # first if we set CC to just the basename; use the full file name. shift set dummy "$ac_dir/$ac_word" "$@" shift ac_cv_prog_CC="$@" fi fi fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$CC"; then case "`uname -s`" in *win32* | *WIN32*) # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:1050: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="cl" break fi done IFS="$ac_save_ifs" fi fi CC="$ac_cv_prog_CC" if test -n "$CC"; then echo "$ac_t""$CC" 1>&6 else echo "$ac_t""no" 1>&6 fi ;; esac fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 echo "configure:1082: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF #line 1093 "configure" #include "confdefs.h" main(){return(0);} EOF if { (eval echo configure:1098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then ac_cv_prog_cc_cross=no else ac_cv_prog_cc_cross=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 ac_cv_prog_cc_works=no fi rm -fr conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 echo "configure:1124: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 echo "configure:1129: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no fi fi echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes else GCC= fi ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 echo "configure:1157: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else echo 'void f(){}' > conftest.c if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then ac_cv_prog_cc_g=yes else ac_cv_prog_cc_g=no fi rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then if test "$GCC" = yes; then CFLAGS="-g -O2" else CFLAGS="-g" fi else if test "$GCC" = yes; then CFLAGS="-O2" else CFLAGS= fi fi # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: # SysV /etc/install, /usr/sbin/install # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 echo "configure:1200: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. # Don't use installbsd from OSF since it installs stuff as root # by default. for ac_prog in ginstall scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. : else ac_cv_path_install="$ac_dir/$ac_prog -c" break 2 fi fi done ;; esac done IFS="$ac_save_IFS" fi if test "${ac_cv_path_install+set}" = set; then INSTALL="$ac_cv_path_install" else # As a last resort, use the slow shell script. We don't cache a # path for INSTALL within a source directory, because that will # break other packages using the cache if that directory is # removed, or if the path is relative. INSTALL="$ac_install_sh" fi fi echo "$ac_t""$INSTALL" 1>&6 # Use test -z because SunOS4 sh mishandles braces in ${var-val}. # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Find the correct PATH separator. Usually this is `:', but # DJGPP uses `;' like DOS. if test "X${PATH_SEPARATOR+set}" != Xset; then UNAME=${UNAME-`uname 2>/dev/null`} case X$UNAME in *-DOS) lt_cv_sys_path_separator=';' ;; *) lt_cv_sys_path_separator=':' ;; esac PATH_SEPARATOR=$lt_cv_sys_path_separator fi echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 echo "configure:1264: checking for Cygwin environment" >&5 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_cygwin=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_cygwin=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_cygwin" 1>&6 CYGWIN= test "$ac_cv_cygwin" = yes && CYGWIN=yes echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 echo "configure:1297: checking for mingw32 environment" >&5 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_mingw32=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* ac_cv_mingw32=no fi rm -f conftest* rm -f conftest* fi echo "$ac_t""$ac_cv_mingw32" 1>&6 MINGW32= test "$ac_cv_mingw32" = yes && MINGW32=yes echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 echo "configure:1326: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= fi if test -z "$CPP"; then if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # This must be in double quotes, not single quotes, because CPP may get # substituted into the Makefile and "${CC-cc}" will confuse make. CPP="${CC-cc} -E" # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1347: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1364: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:1381: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* CPP=/lib/cpp fi rm -f conftest* fi rm -f conftest* fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi CPP="$ac_cv_prog_CPP" else ac_cv_prog_CPP="$CPP" fi echo "$ac_t""$CPP" 1>&6 # Check whether --enable-shared or --disable-shared was given. if test "${enable_shared+set}" = set; then enableval="$enable_shared" p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac else enable_shared=yes fi # Check whether --enable-static or --disable-static was given. if test "${enable_static+set}" = set; then enableval="$enable_static" p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac else enable_static=yes fi # Check whether --enable-fast-install or --disable-fast-install was given. if test "${enable_fast_install+set}" = set; then enableval="$enable_fast_install" p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac else enable_fast_install=yes fi # Make sure we can run config.sub. if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 echo "configure:1481: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 echo "configure:1502: checking build system type" >&5 build_alias=$build case "$build_alias" in NONE) case $nonopt in NONE) build_alias=$host_alias ;; *) build_alias=$nonopt ;; esac ;; esac build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$build" 1>&6 # Check whether --with-gnu-ld or --without-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval="$with_gnu_ld" test "$withval" = no || with_gnu_ld=yes else with_gnu_ld=no fi ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 echo "configure:1531: checking for ld used by GCC" >&5 case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 echo "configure:1561: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 echo "configure:1564: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi fi LD="$lt_cv_path_LD" if test -n "$LD"; then echo "$ac_t""$LD" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 echo "configure:1599: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi fi echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 with_gnu_ld=$lt_cv_prog_gnu_ld echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 echo "configure:1616: checking for $LD option to reload object files" >&5 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_ld_reload_flag='-r' fi echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 echo "configure:1628: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi NM="$lt_cv_path_NM" echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 echo "configure:1666: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftestdata if ln -s X conftestdata 2>/dev/null then rm -f conftestdata ac_cv_prog_LN_S="ln -s" else ac_cv_prog_LN_S=ln fi fi LN_S="$ac_cv_prog_LN_S" if test "$ac_cv_prog_LN_S" = "ln -s"; then echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 fi echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 echo "configure:1687: checking how to recognise dependant libraries" >&5 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix4* | aix5*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* | pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[012]) lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux-gnu*) case $host_cpu in alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' else lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; openbsd*) lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' else lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' fi ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv5uw[78]* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; esac ;; esac fi echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method echo $ac_n "checking for object suffix""... $ac_c" 1>&6 echo "configure:1870: checking for object suffix" >&5 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else rm -f conftest* echo 'int i = 1;' > conftest.$ac_ext if { (eval echo configure:1876: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then for ac_file in conftest.*; do case $ac_file in *.c) ;; *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; esac done else { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } fi rm -f conftest* fi echo "$ac_t""$ac_cv_objext" 1>&6 OBJEXT=$ac_cv_objext ac_objext=$ac_cv_objext echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 echo "configure:1896: checking for executable suffix" >&5 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$CYGWIN" = yes || test "$MINGW32" = yes; then ac_cv_exeext=.exe else rm -f conftest* echo 'int main () { return 0; }' > conftest.$ac_ext ac_cv_exeext= if { (eval echo configure:1906: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then for file in conftest.*; do case $file in *.c | *.o | *.obj) ;; *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; esac done else { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } fi rm -f conftest* test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi fi EXEEXT="" test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} echo "$ac_t""${ac_cv_exeext}" 1>&6 ac_exeext=$EXEEXT if test $host != $build; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi # Check for command to grab the raw symbol name followed by C symbol from nm. echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6 echo "configure:1937: checking command to parse $NM output" >&5 if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[BCDEGRST]' # Regexp to match symbols that can be accessed directly from C. sympat='\([_A-Za-z][_A-Za-z0-9]*\)' # Transform the above into a raw symbol and a C symbol. symxfrm='\1 \2\3 \3' # Transform an extracted symbol line into a proper C declaration lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[BCDT]' ;; cygwin* | mingw* | pw32*) symcode='[ABCDGISTW]' ;; hpux*) # Its linker distinguishes data from code symbols lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; irix*) symcode='[BCDEGRST]' ;; solaris* | sysv5*) symcode='[BDT]' ;; sysv4) symcode='[DFNSTU]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $host_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then symcode='[ABCDGISTW]' fi # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then # Now try to grab the symbols. nlist=conftest.nm if { (eval echo configure:2020: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if egrep ' nm_test_var$' "$nlist" >/dev/null; then if egrep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr address; } lt_preloaded_symbols[] = { EOF sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$no_builtin_flag" if { (eval echo configure:2071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then pipe_works=yes fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&5 fi else echo "cannot find nm_test_var in $nlist" >&5 fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 fi else echo "$progname: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done fi global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" if test -z "$lt_cv_sys_global_symbol_pipe"; then global_symbol_to_cdecl= global_symbol_to_c_name_address= else global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" fi if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; then echo "$ac_t""failed" 1>&6 else echo "$ac_t""ok" 1>&6 fi for ac_hdr in dlfcn.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 echo "configure:2120: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" { (eval echo configure:2130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" else echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` cat >> confdefs.h <&6 fi done # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 echo "configure:2165: checking for ${ac_tool_prefix}file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/${ac_tool_prefix}file; then lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then echo $ac_n "checking for file""... $ac_c" 1>&6 echo "configure:2227: checking for file" >&5 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="/usr/bin:$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/file; then lt_cv_path_MAGIC_CMD="$ac_dir/file" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac fi MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then echo "$ac_t""$MAGIC_CMD" 1>&6 else echo "$ac_t""no" 1>&6 fi else MAGIC_CMD=: fi fi fi ;; esac # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2298: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" break fi done IFS="$ac_save_ifs" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_RANLIB"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2330: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi RANLIB="$ac_cv_prog_RANLIB" if test -n "$RANLIB"; then echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi else RANLIB=":" fi fi # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. set dummy ${ac_tool_prefix}strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2365: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" break fi done IFS="$ac_save_ifs" fi fi STRIP="$ac_cv_prog_STRIP" if test -n "$STRIP"; then echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi if test -z "$ac_cv_prog_STRIP"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "strip", so it can be a program name with args. set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:2397: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_STRIP="strip" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" fi fi STRIP="$ac_cv_prog_STRIP" if test -n "$STRIP"; then echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi else STRIP=":" fi fi enable_dlopen=no enable_win32_dll=no # Check whether --enable-libtool-lock or --disable-libtool-lock was given. if test "${enable_libtool_lock+set}" = set; then enableval="$enable_libtool_lock" : fi test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '#line 2446 "configure"' > conftest.$ac_ext if { (eval echo configure:2447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 echo "configure:2468: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* lt_cv_cc_needs_belf=no fi rm -f conftest* ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross fi echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" need_locks="$enable_libtool_lock" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o if test x"$host" != x"$build"; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi # Transform linux* to *-*-linux-gnu*, to support old configure scripts. case $host_os in linux-gnu*) ;; linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` esac case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ;; *) old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi # Allow CC to be a program name with arguments. set dummy $CC compiler="$2" echo $ac_n "checking for objdir""... $ac_c" 1>&6 echo "configure:2608: checking for objdir" >&5 rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. objdir=_libs fi rmdir .libs 2>/dev/null echo "$ac_t""$objdir" 1>&6 # Check whether --with-pic or --without-pic was given. if test "${with_pic+set}" = set; then withval="$with_pic" pic_mode="$withval" else pic_mode=default fi test -z "$pic_mode" && pic_mode=default # We assume here that the value for lt_cv_prog_cc_pic will not be cached # in isolation, and that seeing it set (from the cache) indicates that # the associated values are set (in the cache) correctly too. echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6 echo "configure:2635: checking for $compiler option to produce PIC" >&5 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_prog_cc_pic= lt_cv_prog_cc_shlib= lt_cv_prog_cc_wl= lt_cv_prog_cc_static= lt_cv_prog_cc_no_builtin= lt_cv_prog_cc_can_build_shared=$can_build_shared if test "$GCC" = yes; then lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-static' case $host_os in aix*) # Below there is a dirty hack to force normal static linking with -ldl # The problem is because libdl dynamically linked with both libc and # libC (AIX C++ library), which obviously doesn't included in libraries # list by gcc. This cause undefined symbols with -static flags. # This hack allows C programs to be linked with "-static -ldl", but # not sure about C++ programs. lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_cv_prog_cc_pic='-fno-common' ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_cv_prog_cc_pic='-DDLL_EXPORT' ;; sysv4*MP*) if test -d /usr/nec; then lt_cv_prog_cc_pic=-Kconform_pic fi ;; *) lt_cv_prog_cc_pic='-fPIC' ;; esac else # PORTME Check for PIC flags for the system compiler. case $host_os in aix3* | aix4* | aix5*) lt_cv_prog_cc_wl='-Wl,' # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_cv_prog_cc_static='-Bstatic' else lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' fi ;; hpux9* | hpux10* | hpux11*) # Is there a better lt_cv_prog_cc_static that works with the bundled CC? lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" lt_cv_prog_cc_pic='+Z' ;; irix5* | irix6*) lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-non_shared' # PIC (with -KPIC) is the default. ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_cv_prog_cc_pic='-DDLL_EXPORT' ;; newsos6) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' ;; osf3* | osf4* | osf5*) # All OSF/1 code is PIC. lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-non_shared' ;; sco3.2v5*) lt_cv_prog_cc_pic='-Kpic' lt_cv_prog_cc_static='-dn' lt_cv_prog_cc_shlib='-belf' ;; solaris*) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' lt_cv_prog_cc_wl='-Wl,' ;; sunos4*) lt_cv_prog_cc_pic='-PIC' lt_cv_prog_cc_static='-Bstatic' lt_cv_prog_cc_wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' if test "x$host_vendor" = xsni; then lt_cv_prog_cc_wl='-LD' else lt_cv_prog_cc_wl='-Wl,' fi ;; uts4*) lt_cv_prog_cc_pic='-pic' lt_cv_prog_cc_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_cv_prog_cc_pic='-Kconform_pic' lt_cv_prog_cc_static='-Bstatic' fi ;; *) lt_cv_prog_cc_can_build_shared=no ;; esac fi fi if test -z "$lt_cv_prog_cc_pic"; then echo "$ac_t""none" 1>&6 else echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6 # Check to make sure the pic_flag actually works. echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6 echo "configure:2787: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* case $host_os in hpux9* | hpux10* | hpux11*) # On HP-UX, both CC and GCC only warn that PIC is supported... then # they create non-PIC objects. So, if there were any warnings, we # assume that PIC is not supported. if test -s conftest.err; then lt_cv_prog_cc_pic_works=no else lt_cv_prog_cc_pic_works=yes fi ;; *) lt_cv_prog_cc_pic_works=yes ;; esac else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* lt_cv_prog_cc_pic_works=no fi rm -f conftest* CFLAGS="$save_CFLAGS" fi if test "X$lt_cv_prog_cc_pic_works" = Xno; then lt_cv_prog_cc_pic= lt_cv_prog_cc_can_build_shared=no else lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" fi echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6 fi # Check for any special shared library compilation flags. if test -n "$lt_cv_prog_cc_shlib"; then echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2 if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : else echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2 lt_cv_prog_cc_can_build_shared=no fi fi echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6 echo "configure:2853: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_prog_cc_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_prog_cc_static_works=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* LDFLAGS="$save_LDFLAGS" fi # Belt *and* braces to stop my trousers falling down: test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6 pic_flag="$lt_cv_prog_cc_pic" special_shlib_compile_flags="$lt_cv_prog_cc_shlib" wl="$lt_cv_prog_cc_wl" link_static_flag="$lt_cv_prog_cc_static" no_builtin_flag="$lt_cv_prog_cc_no_builtin" can_build_shared="$lt_cv_prog_cc_can_build_shared" # Check to see if options -o and -c are simultaneously supported by compiler echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6 echo "configure:2895: checking if $compiler supports -c -o file.$ac_objext" >&5 if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else $rm -r conftest 2>/dev/null mkdir conftest cd conftest echo "int some_variable = 0;" > conftest.$ac_ext mkdir out # According to Tom Tromey, Ian Lance Taylor reported there are C compilers # that will create temporary files in the current directory regardless of # the output directory. Thus, making CWD read-only will cause this test # to fail, enabling locking or at least warning the user not to do parallel # builds. chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" compiler_c_o=no if { (eval echo configure:2914: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then lt_cv_compiler_c_o=no else lt_cv_compiler_c_o=yes fi else # Append any errors to the config.log. cat out/conftest.err 1>&5 lt_cv_compiler_c_o=no fi CFLAGS="$save_CFLAGS" chmod u+w . $rm conftest* out/* rmdir out cd .. rmdir conftest $rm -r conftest 2>/dev/null fi compiler_c_o=$lt_cv_compiler_c_o echo "$ac_t""$compiler_c_o" 1>&6 if test x"$compiler_c_o" = x"yes"; then # Check to see if we can write to a .lo echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6 echo "configure:2943: checking if $compiler supports -c -o file.lo" >&5 if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else lt_cv_compiler_o_lo=no save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -c -o conftest.lo" save_objext="$ac_objext" ac_objext=lo cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then lt_cv_compiler_o_lo=no else lt_cv_compiler_o_lo=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* ac_objext="$save_objext" CFLAGS="$save_CFLAGS" fi compiler_o_lo=$lt_cv_compiler_o_lo echo "$ac_t""$compiler_o_lo" 1>&6 else compiler_o_lo=no fi # Check to see if we can do hard links to lock some files if needed hard_links="nottested" if test "$compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6 echo "configure:2992: checking if we can lock with hard links" >&5 hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no echo "$ac_t""$hard_links" 1>&6 if test "$hard_links" = no; then echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2 need_locks=warn fi else need_locks=no fi if test "$GCC" = yes; then # Check to see if options -fno-rtti -fno-exceptions are supported by compiler echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6 echo "configure:3011: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 echo "int some_variable = 0;" > conftest.$ac_ext save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" compiler_rtti_exceptions=no cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then compiler_rtti_exceptions=no else compiler_rtti_exceptions=yes fi else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 fi rm -f conftest* CFLAGS="$save_CFLAGS" echo "$ac_t""$compiler_rtti_exceptions" 1>&6 if test "$compiler_rtti_exceptions" = "yes"; then no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' else no_builtin_flag=' -fno-builtin' fi fi # See if the linker supports building shared libraries. echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6 echo "configure:3051: checking whether the linker ($LD) supports shared libraries" >&5 allow_undefined_flag= no_undefined_flag= need_lib_prefix=unknown need_version=unknown # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments archive_cmds= archive_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= export_dynamic_flag_spec= whole_archive_flag_spec= thread_safe_flag_spec= hardcode_into_libs=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no hardcode_shlibpath_var=unsupported runpath_var= link_all_deplibs=unknown always_export_symbols=no export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an egrep regular expression of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms="_GLOBAL_OFFSET_TABLE_" # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) # On AIX, the GNU linker is very broken # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. ld_shlibs=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=yes extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ test -f $output_objdir/impgen.exe || (cd $output_objdir && \ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ else $CC -o impgen impgen.c ; fi)~ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' # cygwin and mingw dlls have different entry points and sets of symbols # to exclude. # FIXME: what about values for MSVC? dll_entry=__cygwin_dll_entry@12 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ case $host_os in mingw*) # mingw values dll_entry=_DllMainCRTStartup@12 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ ;; esac # mingw and cygwin differ, and it's simplest to just exclude the union # of the two symbol sets. dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one (in ltdll.c) if test "x$lt_cv_need_dllmain" = "xyes"; then ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' else ltdll_obj= ltdll_cmds= fi # Extract the symbol export list from an `--export-all' def file, # then regenerate the def file from the symbol export list, so that # the compiled dll only exports the symbol export list. # Be careful not to strip the DATA tag left be newer dlltools. export_symbols_cmds="$ltdll_cmds"' $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is. # If DATA tags from a recent dlltool are present, honour them! archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname-def; else echo EXPORTS > $output_objdir/$soname-def; _lt_hint=1; cat $export_symbols | while read symbol; do set dummy \$symbol; case \$# in 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; esac; _lt_hint=`expr 1 + \$_lt_hint`; done; fi~ '"$ltdll_cmds"' $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris* | sysv5*) if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = yes; then runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' case $host_os in cygwin* | mingw* | pw32*) # dlltool doesn't understand --whole-archive et. al. whole_archive_flag_spec= ;; *) # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi ;; esac fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$link_static_flag"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[23]|aix4.[23].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. hardcode_direct=yes archive_cmds='' hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[012]|aix4.[012].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall can do strange things, so it is better to # generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. allow_undefined_flag='${wl}-berok' # This is a bit strange, but is similar to how AIX traditionally builds # it's shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' fi fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' ;; darwin* | rhapsody*) case "$host_os" in rhapsody* | darwin1.[012]) allow_undefined_flag='-undefined suppress' ;; *) # Darwin 1.3 on allow_undefined_flag='-flat_namespace -undefined suppress' ;; esac # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' # We need to add '_' to the symbols in $export_symbols first #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' hardcode_direct=yes hardcode_shlibpath_var=no whole_archive_flag_spec='-all_load $convenience' ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9* | hpux10* | hpux11*) case $host_os in hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; esac hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_minus_L=yes # Not in the search PATH, but as the default # location of the library. export_dynamic_flag_spec='${wl}-E' ;; irix5* | irix6*) if test "$GCC" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; openbsd*) hardcode_direct=yes hardcode_shlibpath_var=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case "$host_os" in openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' #Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; sco3.2v5*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes export_dynamic_flag_spec='${wl}-Bexport' ;; solaris*) # gcc --version < 3.0 without binutils cannot create self contained # shared libraries reliably, requiring libgcc.a to resolve some of # the object symbols generated in some cases. Libraries that use # assert need libgcc.a to resolve __eprintf, for example. Linking # a copy of libgcc.a into every shared library to guarantee resolving # such symbols causes other problems: According to Tim Van Holder # , C++ libraries end up with a separate # (to the application) exception stack for one thing. no_undefined_flag=' -z defs' if test "$GCC" = yes; then case `$CC --version 2>/dev/null` in [12].*) cat <&2 *** Warning: Releases of GCC earlier than version 3.0 cannot reliably *** create self contained shared libraries on Solaris systems, without *** introducing a dependency on libgcc.a. Therefore, libtool is disabling *** -no-undefined support, which will at least allow you to build shared *** libraries. However, you may find that when you link such libraries *** into an application without using GCC, you have to manually add *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to *** upgrade to a newer version of GCC. Another option is to rebuild your *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. EOF no_undefined_flag= ;; esac fi # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[0-5] | solaris2.[0-5].*) ;; *) # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) if test "x$host_vendor" = xsno; then archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? else archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv5*) no_undefined_flag=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec= hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4.2uw2*) archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=no hardcode_shlibpath_var=no hardcode_runpath_var=yes runpath_var=LD_RUN_PATH ;; sysv5uw7* | unixware7*) no_undefined_flag='${wl}-z ${wl}text' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac fi echo "$ac_t""$ld_shlibs" 1>&6 test "$ld_shlibs" = no && can_build_shared=no # Check hardcoding attributes. echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6 echo "configure:3735: checking how to hardcode library paths into programs" >&5 hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ test -n "$runpath_var"; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$hardcode_shlibpath_var" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi echo "$ac_t""$hardcode_action" 1>&6 striplib= old_striplib= echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6 echo "configure:3763: checking whether stripping libraries is possible" >&5 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" echo "$ac_t""yes" 1>&6 else echo "$ac_t""no" 1>&6 fi reload_cmds='$LD$reload_flag -o $output$reload_objs' test -z "$deplibs_check_method" && deplibs_check_method=unknown # PORTME Fill in your ld.so characteristics echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6 echo "configure:3777: checking dynamic linker characteristics" >&5 library_names_spec= libname_spec='lib$name' soname_spec= postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}.so$versuffix $libname.a' shlibpath_var=LIBPATH # AIX has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}.so$major' ;; aix4* | aix5*) version_type=linux if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[01] | aix4.[01].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can # not hardcode correct soname into executable. Probably we can # add versioning support to collect2, so additional links can # be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}.so$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' ;; beos*) library_names_spec='${libname}.so' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi4*) version_type=linux need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" export_dynamic_flag_spec=-rdynamic # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin*) library_names_spec='$libname.dll.a' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog .libs/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' ;; yes,mingw*) library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` ;; yes,pw32*) library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' ;; *) library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd*) objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; *) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. dynamic_linker="$host_os dld.sl" version_type=sunos need_lib_prefix=no need_version=no shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' soname_spec='${libname}${release}.sl$major' # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; irix5* | irix6*) version_type=irix need_lib_prefix=no need_version=no soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' case $host_os in irix5*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ;; # No shared lib support for Linux oldld, aout, or coff. linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) dynamic_linker=no ;; # This must be Linux ELF. linux-gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' soname_spec='${libname}${release}.so$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos need_lib_prefix=no need_version=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case "$host_os" in openbsd2.[89] | openbsd2.[89].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH ;; os2*) libname_spec='$name' need_lib_prefix=no library_names_spec='$libname.dll $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_version=no soname_spec='${libname}${release}.so' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; sco3.2v5*) version_type=osf soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; uts4*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' soname_spec='$libname.so.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; *) dynamic_linker=no ;; esac echo "$ac_t""$dynamic_linker" 1>&6 test "$dynamic_linker" = no && can_build_shared=no # Report the final consequences. echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6 echo "configure:4174: checking if libtool supports shared libraries" >&5 echo "$ac_t""$can_build_shared" 1>&6 echo $ac_n "checking whether to build shared libraries""... $ac_c" 1>&6 echo "configure:4178: checking whether to build shared libraries" >&5 test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case "$host_os" in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix4*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac echo "$ac_t""$enable_shared" 1>&6 echo $ac_n "checking whether to build static libraries""... $ac_c" 1>&6 echo "configure:4201: checking whether to build static libraries" >&5 # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes echo "$ac_t""$enable_static" 1>&6 if test "$hardcode_action" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; cygwin* | mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; *) echo $ac_n "checking for shl_load""... $ac_c" 1>&6 echo "configure:4242: checking for shl_load" >&5 if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char shl_load(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_shl_load) || defined (__stub___shl_load) choke me #else shl_load(); #endif ; return 0; } EOF if { (eval echo configure:4270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_shl_load=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_shl_load=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="shl_load" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6 echo "configure:4288: checking for shl_load in -ldld" >&5 ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen""... $ac_c" 1>&6 echo "configure:4326: checking for dlopen" >&5 if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 builtin and then its argument prototype would still apply. */ char dlopen(); int main() { /* The GNU C library defines this for functions which it implements to always fail with ENOSYS. Some functions are actually named something starting with __ and the normal name is an alias. */ #if defined (__stub_dlopen) || defined (__stub___dlopen) choke me #else dlopen(); #endif ; return 0; } EOF if { (eval echo configure:4354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_dlopen=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_func_dlopen=no" fi rm -f conftest* fi if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6 echo "configure:4372: checking for dlopen in -ldl" >&5 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6 echo "configure:4410: checking for dlopen in -lsvld" >&5 ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-lsvld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" else echo "$ac_t""no" 1>&6 echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6 echo "configure:4448: checking for dld_link in -ldld" >&5 ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_save_LIBS="$LIBS" LIBS="-ldld $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=no" fi rm -f conftest* LIBS="$ac_save_LIBS" fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" else echo "$ac_t""no" 1>&6 fi fi fi fi fi fi ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6 echo "configure:4523: checking whether a program can dlopen itself" >&5 if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); } EOF if { (eval echo configure:4594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; x$lt_unknown|x*) lt_cv_dlopen_self=no ;; esac else : # compilation failed lt_cv_dlopen_self=no fi fi rm -fr conftest* fi echo "$ac_t""$lt_cv_dlopen_self" 1>&6 if test "x$lt_cv_dlopen_self" = xyes; then LDFLAGS="$LDFLAGS $link_static_flag" echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6 echo "configure:4617: checking whether a statically linked program can dlopen itself" >&5 if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test "$cross_compiling" = yes; then : lt_cv_dlopen_self_static=cross else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); } EOF if { (eval echo configure:4688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; esac else : # compilation failed lt_cv_dlopen_self_static=no fi fi rm -fr conftest* fi echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6 fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6 echo "configure:4737: checking whether -lc should be explicitly linked in" >&5 if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else $rm conftest* echo 'static int dummy;' > conftest.$ac_ext if { (eval echo configure:4744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_cv_prog_cc_wl compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if { (eval echo configure:4757: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; } then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$save_allow_undefined_flag else cat conftest.err 1>&5 fi fi echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6 ;; esac fi need_lc=${lt_cv_archive_cmds_need_lc-yes} # The second clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then : else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. test -f Makefile && make "$ltmain" fi if test -f "$ltmain"; then trap "$rm \"${ofile}T\"; exit 1" 1 2 15 $rm -f "${ofile}T" echo creating $ofile # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS \ AR AR_FLAGS CC LD LN_S NM SHELL \ reload_flag reload_cmds wl \ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ thread_safe_flag_spec whole_archive_flag_spec libname_spec \ library_names_spec soname_spec \ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ old_striplib striplib file_magic_cmd export_symbols_cmds \ deplibs_check_method allow_undefined_flag no_undefined_flag \ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ global_symbol_to_c_name_address \ hardcode_libdir_flag_spec hardcode_libdir_separator \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do case $var in reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ postinstall_cmds | postuninstall_cmds | \ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done cat <<__EOF__ > "${ofile}T" #! $SHELL # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996-2000 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="sed -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi # ### BEGIN LIBTOOL CONFIG # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$need_lc # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # The default C compiler. CC=$lt_CC # Is the compiler the GNU C compiler? with_gcc=$GCC # The linker used to build libraries. LD=$lt_LD # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_wl # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_pic_flag pic_mode=$pic_mode # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_compiler_c_o # Can we write directly to a .lo ? compiler_o_lo=$lt_compiler_o_lo # Must we lock files when doing compilation ? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_link_static_flag # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_no_builtin_flag # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path="$fix_srcfile_path" # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # ### END LIBTOOL CONFIG __EOF__ case $host_os in aix3*) cat <<\EOF >> "${ofile}T" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac case $host_os in cygwin* | mingw* | pw32* | os2*) cat <<'EOF' >> "${ofile}T" # This is a source program that is used to create dlls on Windows # Don't remove nor modify the starting and closing comments # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ # This is a source program that is used to create import libraries # on Windows for dlls which lack them. Don't remove nor modify the # starting and closing comments # /* impgen.c starts here */ # /* Copyright (C) 1999-2000 Free Software Foundation, Inc. # # This file is part of GNU libtool. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # */ # # #include /* for printf() */ # #include /* for open(), lseek(), read() */ # #include /* for O_RDONLY, O_BINARY */ # #include /* for strdup() */ # # /* O_BINARY isn't required (or even defined sometimes) under Unix */ # #ifndef O_BINARY # #define O_BINARY 0 # #endif # # static unsigned int # pe_get16 (fd, offset) # int fd; # int offset; # { # unsigned char b[2]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 2); # return b[0] + (b[1]<<8); # } # # static unsigned int # pe_get32 (fd, offset) # int fd; # int offset; # { # unsigned char b[4]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 4); # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # static unsigned int # pe_as32 (ptr) # void *ptr; # { # unsigned char *b = ptr; # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # int # main (argc, argv) # int argc; # char *argv[]; # { # int dll; # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; # unsigned long export_rva, export_size, nsections, secptr, expptr; # unsigned long name_rvas, nexp; # unsigned char *expdata, *erva; # char *filename, *dll_name; # # filename = argv[1]; # # dll = open(filename, O_RDONLY|O_BINARY); # if (dll < 1) # return 1; # # dll_name = filename; # # for (i=0; filename[i]; i++) # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') # dll_name = filename + i +1; # # pe_header_offset = pe_get32 (dll, 0x3c); # opthdr_ofs = pe_header_offset + 4 + 20; # num_entries = pe_get32 (dll, opthdr_ofs + 92); # # if (num_entries < 1) /* no exports */ # return 1; # # export_rva = pe_get32 (dll, opthdr_ofs + 96); # export_size = pe_get32 (dll, opthdr_ofs + 100); # nsections = pe_get16 (dll, pe_header_offset + 4 +2); # secptr = (pe_header_offset + 4 + 20 + # pe_get16 (dll, pe_header_offset + 4 + 16)); # # expptr = 0; # for (i = 0; i < nsections; i++) # { # char sname[8]; # unsigned long secptr1 = secptr + 40 * i; # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); # unsigned long vsize = pe_get32 (dll, secptr1 + 16); # unsigned long fptr = pe_get32 (dll, secptr1 + 20); # lseek(dll, secptr1, SEEK_SET); # read(dll, sname, 8); # if (vaddr <= export_rva && vaddr+vsize > export_rva) # { # expptr = fptr + (export_rva - vaddr); # if (export_rva + export_size > vaddr + vsize) # export_size = vsize - (export_rva - vaddr); # break; # } # } # # expdata = (unsigned char*)malloc(export_size); # lseek (dll, expptr, SEEK_SET); # read (dll, expdata, export_size); # erva = expdata - export_rva; # # nexp = pe_as32 (expdata+24); # name_rvas = pe_as32 (expdata+32); # # printf ("EXPORTS\n"); # for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) mv -f "${ofile}T" "$ofile" || \ (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") chmod +x "$ofile" fi # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' # Prevent multiple expansion # Check whether --with-glib-prefix or --without-glib-prefix was given. if test "${with_glib_prefix+set}" = set; then withval="$with_glib_prefix" glib_config_prefix="$withval" else glib_config_prefix="" fi # Check whether --with-glib-exec-prefix or --without-glib-exec-prefix was given. if test "${with_glib_exec_prefix+set}" = set; then withval="$with_glib_exec_prefix" glib_config_exec_prefix="$withval" else glib_config_exec_prefix="" fi # Check whether --enable-glibtest or --disable-glibtest was given. if test "${enable_glibtest+set}" = set; then enableval="$enable_glibtest" : else enable_glibtest=yes fi if test x$glib_config_exec_prefix != x ; then glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix" if test x${GLIB_CONFIG+set} != xset ; then GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config fi fi if test x$glib_config_prefix != x ; then glib_config_args="$glib_config_args --prefix=$glib_config_prefix" if test x${GLIB_CONFIG+set} != xset ; then GLIB_CONFIG=$glib_config_prefix/bin/glib-config fi fi for module in . do case "$module" in gmodule) glib_config_args="$glib_config_args gmodule" ;; gthread) glib_config_args="$glib_config_args gthread" ;; esac done # Extract the first word of "glib-config", so it can be a program name with args. set dummy glib-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:5392: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GLIB_CONFIG'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$GLIB_CONFIG" in /*) ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_GLIB_CONFIG="$GLIB_CONFIG" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GLIB_CONFIG="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_GLIB_CONFIG" && ac_cv_path_GLIB_CONFIG="no" ;; esac fi GLIB_CONFIG="$ac_cv_path_GLIB_CONFIG" if test -n "$GLIB_CONFIG"; then echo "$ac_t""$GLIB_CONFIG" 1>&6 else echo "$ac_t""no" 1>&6 fi min_glib_version=1.2.0 echo $ac_n "checking for GLIB - version >= $min_glib_version""... $ac_c" 1>&6 echo "configure:5427: checking for GLIB - version >= $min_glib_version" >&5 no_glib="" if test "$GLIB_CONFIG" = "no" ; then no_glib=yes else GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags` GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs` glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` if test "x$enable_glibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$GLIB_LIBS $LIBS" rm -f conf.glibtest if test "$cross_compiling" = yes; then echo $ac_n "cross compiling; assumed OK... $ac_c" else cat > conftest.$ac_ext < #include #include int main () { int major, minor, micro; char *tmp_version; system ("touch conf.glibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_glib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_glib_version"); exit(1); } if ((glib_major_version != $glib_config_major_version) || (glib_minor_version != $glib_config_minor_version) || (glib_micro_version != $glib_config_micro_version)) { printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, glib_major_version, glib_minor_version, glib_micro_version); printf ("*** was found! If glib-config was correct, then it is best\n"); printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n"); printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n"); printf("*** before re-running configure\n"); } else if ((glib_major_version != GLIB_MAJOR_VERSION) || (glib_minor_version != GLIB_MINOR_VERSION) || (glib_micro_version != GLIB_MICRO_VERSION)) { printf("*** GLIB header files (version %d.%d.%d) do not match\n", GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", glib_major_version, glib_minor_version, glib_micro_version); } else { if ((glib_major_version > major) || ((glib_major_version == major) && (glib_minor_version > minor)) || ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", glib_major_version, glib_minor_version, glib_micro_version); printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the glib-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n"); printf("*** correct copy of glib-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } EOF if { (eval echo configure:5526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* no_glib=yes fi rm -fr conftest* fi CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_glib" = x ; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 if test "$GLIB_CONFIG" = "no" ; then echo "*** The glib-config script installed by GLIB could not be found" echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the GLIB_CONFIG environment variable to the" echo "*** full path to glib-config." else if test -f conf.glibtest ; then : else echo "*** Could not run GLIB test program, checking why..." CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$LIBS $GLIB_LIBS" cat > conftest.$ac_ext < #include int main() { return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ; return 0; } EOF if { (eval echo configure:5570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GLIB or finding the wrong" echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" echo "***" echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" echo "*** came with the system with the command" echo "***" echo "*** rpm --erase --nodeps gtk gtk-devel" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GLIB was incorrectly installed" echo "*** or that you have moved GLIB since it was installed. In the latter case, you" echo "*** may want to edit the glib-config script: $GLIB_CONFIG" fi rm -f conftest* CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GLIB_CFLAGS="" GLIB_LIBS="" { echo "configure: error: *** GLIB >= 1.2.0 not installed - please ins tall first ***" 1>&2; exit 1; } fi rm -f conf.glibtest # Check whether --with-gtk-prefix or --without-gtk-prefix was given. if test "${with_gtk_prefix+set}" = set; then withval="$with_gtk_prefix" gtk_config_prefix="$withval" else gtk_config_prefix="" fi # Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given. if test "${with_gtk_exec_prefix+set}" = set; then withval="$with_gtk_exec_prefix" gtk_config_exec_prefix="$withval" else gtk_config_exec_prefix="" fi # Check whether --enable-gtktest or --disable-gtktest was given. if test "${enable_gtktest+set}" = set; then enableval="$enable_gtktest" : else enable_gtktest=yes fi for module in . do case "$module" in gthread) gtk_config_args="$gtk_config_args gthread" ;; esac done if test x$gtk_config_exec_prefix != x ; then gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix" if test x${GTK_CONFIG+set} != xset ; then GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config fi fi if test x$gtk_config_prefix != x ; then gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix" if test x${GTK_CONFIG+set} != xset ; then GTK_CONFIG=$gtk_config_prefix/bin/gtk-config fi fi # Extract the first word of "gtk-config", so it can be a program name with args. set dummy gtk-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:5659: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$GTK_CONFIG" in /*) ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no" ;; esac fi GTK_CONFIG="$ac_cv_path_GTK_CONFIG" if test -n "$GTK_CONFIG"; then echo "$ac_t""$GTK_CONFIG" 1>&6 else echo "$ac_t""no" 1>&6 fi min_gtk_version=1.2.0 echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6 echo "configure:5694: checking for GTK - version >= $min_gtk_version" >&5 no_gtk="" if test "$GTK_CONFIG" = "no" ; then no_gtk=yes else GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags` GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs` gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\1/'` gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\2/'` gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" rm -f conf.gtktest if test "$cross_compiling" = yes; then echo $ac_n "cross compiling; assumed OK... $ac_c" else cat > conftest.$ac_ext < #include #include int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If gtk-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n"); printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n"); printf("*** before re-running configure\n"); } #if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION) else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } #endif /* defined (GTK_MAJOR_VERSION) ... */ else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the gtk-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n"); printf("*** correct copy of gtk-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } EOF if { (eval echo configure:5795: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -fr conftest* no_gtk=yes fi rm -fr conftest* fi CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 if test "$GTK_CONFIG" = "no" ; then echo "*** The gtk-config script installed by GTK could not be found" echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the GTK_CONFIG environment variable to the" echo "*** full path to gtk-config." else if test -f conf.gtktest ; then : else echo "*** Could not run GTK test program, checking why..." CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" cat > conftest.$ac_ext < #include int main() { return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ; return 0; } EOF if { (eval echo configure:5839: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK or finding the wrong" echo "*** version of GTK. If it is not finding GTK, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" echo "***" echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" echo "*** came with the system with the command" echo "***" echo "*** rpm --erase --nodeps gtk gtk-devel" else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GTK was incorrectly installed" echo "*** or that you have moved GTK since it was installed. In the latter case, you" echo "*** may want to edit the gtk-config script: $GTK_CONFIG" fi rm -f conftest* CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" { echo "configure: error: *** GTK+ >= 1.2.0 not installed - please inst all first ***" 1>&2; exit 1; } fi rm -f conf.gtktest # Check whether --with-xmms-prefix or --without-xmms-prefix was given. if test "${with_xmms_prefix+set}" = set; then withval="$with_xmms_prefix" xmms_config_prefix="$withval" else xmms_config_prefix="" fi # Check whether --with-xmms-exec-prefix or --without-xmms-exec-prefix was given. if test "${with_xmms_exec_prefix+set}" = set; then withval="$with_xmms_exec_prefix" xmms_config_exec_prefix="$withval" else xmms_config_exec_prefix="" fi if test x$xmms_config_exec_prefix != x; then xmms_config_args="$xmms_config_args --exec-prefix=$xmms_config_exec_prefix" if test x${XMMS_CONFIG+set} != xset; then XMMS_CONFIG=$xmms_config_exec_prefix/bin/xmms-config fi fi if test x$xmms_config_prefix != x; then xmms_config_args="$xmms_config_args --prefix=$xmms_config_prefix" if test x${XMMS_CONFIG+set} != xset; then XMMS_CONFIG=$xmms_config_prefix/bin/xmms-config fi fi # Extract the first word of "xmms-config", so it can be a program name with args. set dummy xmms-config; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:5913: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XMMS_CONFIG'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else case "$XMMS_CONFIG" in /*) ac_cv_path_XMMS_CONFIG="$XMMS_CONFIG" # Let the user override the test with a path. ;; ?:/*) ac_cv_path_XMMS_CONFIG="$XMMS_CONFIG" # Let the user override the test with a dos path. ;; *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_XMMS_CONFIG="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_XMMS_CONFIG" && ac_cv_path_XMMS_CONFIG="no" ;; esac fi XMMS_CONFIG="$ac_cv_path_XMMS_CONFIG" if test -n "$XMMS_CONFIG"; then echo "$ac_t""$XMMS_CONFIG" 1>&6 else echo "$ac_t""no" 1>&6 fi min_xmms_version=1.0.0 if test "$XMMS_CONFIG" = "no"; then no_xmms=yes else XMMS_CFLAGS=`$XMMS_CONFIG $xmms_config_args --cflags` XMMS_LIBS=`$XMMS_CONFIG $xmms_config_args --libs` XMMS_VERSION=`$XMMS_CONFIG $xmms_config_args --version` XMMS_DATA_DIR=`$XMMS_CONFIG $xmms_config_args --data-dir` XMMS_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --plugin-dir` XMMS_VISUALIZATION_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args \ --visualization-plugin-dir` XMMS_INPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --input-plugin-dir` XMMS_OUTPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --output-plugin-dir` XMMS_EFFECT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --effect-plugin-dir` XMMS_GENERAL_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --general-plugin-dir` # Determine which version number is greater. Prints 2 to stdout if # the second number is greater, 1 if the first number is greater, # 0 if the numbers are equal. # Written 15 December 1999 by Ben Gertzfield # Revised 15 December 1999 by Jim Monty for ac_prog in gawk mawk nawk awk do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 echo "configure:5977: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$AWK"; then ac_cv_prog_AWK="$AWK" # Let the user override the test. else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_dummy="$PATH" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_AWK="$ac_prog" break fi done IFS="$ac_save_ifs" fi fi AWK="$ac_cv_prog_AWK" if test -n "$AWK"; then echo "$ac_t""$AWK" 1>&6 else echo "$ac_t""no" 1>&6 fi test -n "$AWK" && break done xmms_got_version=` $AWK ' \ BEGIN { \ print vercmp(ARGV[1], ARGV[2]); \ } \ \ function vercmp(ver1, ver2, ver1arr, ver2arr, \ ver1len, ver2len, \ ver1int, ver2int, len, i, p) { \ \ ver1len = split(ver1, ver1arr, /\./); \ ver2len = split(ver2, ver2arr, /\./); \ \ len = ver1len > ver2len ? ver1len : ver2len; \ \ for (i = 1; i <= len; i++) { \ p = 1000 ^ (len - i); \ ver1int += ver1arr[i] * p; \ ver2int += ver2arr[i] * p; \ } \ \ if (ver1int < ver2int) \ return 2; \ else if (ver1int > ver2int) \ return 1; \ else \ return 0; \ }' $XMMS_VERSION $min_xmms_version` if test $xmms_got_version -eq 2; then # failure no_xmms=version else # success! : fi fi echo $ac_n "checking for XMMS - version >= $min_xmms_version""... $ac_c" 1>&6 echo "configure:6043: checking for XMMS - version >= $min_xmms_version" >&5 if test "x$no_xmms" = x; then echo "$ac_t""yes" 1>&6 : else echo "$ac_t""no" 1>&6 if test "$XMMS_CONFIG" = "no" ; then echo "*** The xmms-config script installed by XMMS could not be found." echo "*** If XMMS was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the XMMS_CONFIG environment variable to the" echo "*** full path to xmms-config." else if test "$no_xmms" = "version"; then echo "*** An old version of XMMS, $XMMS_VERSION, was found." echo "*** You need a version of XMMS newer than $min_xmms_version." echo "*** The latest version of XMMS is always available from" echo "*** http://www.xmms.org/" echo "***" echo "*** If you have already installed a sufficiently new version, this error" echo "*** probably means that the wrong copy of the xmms-config shell script is" echo "*** being found. The easiest way to fix this is to remove the old version" echo "*** of XMMS, but you can also set the XMMS_CONFIG environment to point to the" echo "*** correct copy of xmms-config. (In this case, you will have to" echo "*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf" echo "*** so that the correct libraries are found at run-time)" fi fi XMMS_CFLAGS="" XMMS_LIBS="" { echo "configure: error: *** XMMS >= 1.0.0 not installed - please ins tall first ***" 1>&2; exit 1; } fi plugindir=$XMMS_INPUT_PLUGIN_DIR CFLAGS="$CFLAGS -Wall -D_REENTRANT `gtk-config --cflags`" trap '' 1 2 15 cat > confcache <<\EOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure # scripts and configure runs. It is not useful on other systems. # If it contains results you don't want to keep, you may remove or edit it. # # By default, configure uses ./config.cache as the cache file, # creating it if it does not exist already. You can give configure # the --cache-file=FILE option to use a different cache file; that is # what configure does when it calls configure scripts in # subdirectories, so they share the cache. # Giving --cache-file=/dev/null disables caching, for debugging configure. # config.status only pays attention to the cache file if you give it the # --recheck option to rerun configure. # EOF # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). sed -n \ -e "s/'/'\\\\''/g" \ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" ;; *) # `set' quotes correctly as required by POSIX, so do not add quotes. sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' ;; esac >> confcache if cmp -s $cache_file confcache; then : else if test -w $cache_file; then echo "updating cache $cache_file" cat confcache > $cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' # Any assignment to VPATH causes Sun make to only execute # the first set of double-colon rules, so remove it if not needed. # If there is a colon in the path, we need to keep it. if test "x$srcdir" = x.; then ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' fi trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. cat > conftest.defs <<\EOF s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g s%\[%\\&%g s%\]%\\&%g s%\$%$$%g EOF DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` rm -f conftest.defs # Without the "./", some shells look in PATH for config.status. : ${CONFIG_STATUS=./config.status} echo creating $CONFIG_STATUS rm -f $CONFIG_STATUS cat > $CONFIG_STATUS </dev/null | sed 1q`: # # $0 $ac_configure_args # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" for ac_option do case "\$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; *) echo "\$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "Makefile src/Makefile " | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF $ac_vpsub $extrasub s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g s%@exec_prefix@%$exec_prefix%g s%@prefix@%$prefix%g s%@program_transform_name@%$program_transform_name%g s%@bindir@%$bindir%g s%@sbindir@%$sbindir%g s%@libexecdir@%$libexecdir%g s%@datadir@%$datadir%g s%@sysconfdir@%$sysconfdir%g s%@sharedstatedir@%$sharedstatedir%g s%@localstatedir@%$localstatedir%g s%@libdir@%$libdir%g s%@includedir@%$includedir%g s%@oldincludedir@%$oldincludedir%g s%@infodir@%$infodir%g s%@mandir@%$mandir%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g s%@INSTALL_DATA@%$INSTALL_DATA%g s%@PACKAGE@%$PACKAGE%g s%@VERSION@%$VERSION%g s%@ACLOCAL@%$ACLOCAL%g s%@AUTOCONF@%$AUTOCONF%g s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g s%@CC@%$CC%g s%@host@%$host%g s%@host_alias@%$host_alias%g s%@host_cpu@%$host_cpu%g s%@host_vendor@%$host_vendor%g s%@host_os@%$host_os%g s%@build@%$build%g s%@build_alias@%$build_alias%g s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@LN_S@%$LN_S%g s%@OBJEXT@%$OBJEXT%g s%@EXEEXT@%$EXEEXT%g s%@ECHO@%$ECHO%g s%@RANLIB@%$RANLIB%g s%@STRIP@%$STRIP%g s%@CPP@%$CPP%g s%@LIBTOOL@%$LIBTOOL%g s%@GLIB_CONFIG@%$GLIB_CONFIG%g s%@GLIB_CFLAGS@%$GLIB_CFLAGS%g s%@GLIB_LIBS@%$GLIB_LIBS%g s%@GTK_CONFIG@%$GTK_CONFIG%g s%@GTK_CFLAGS@%$GTK_CFLAGS%g s%@GTK_LIBS@%$GTK_LIBS%g s%@XMMS_CONFIG@%$XMMS_CONFIG%g s%@AWK@%$AWK%g s%@XMMS_CFLAGS@%$XMMS_CFLAGS%g s%@XMMS_LIBS@%$XMMS_LIBS%g s%@XMMS_VERSION@%$XMMS_VERSION%g s%@XMMS_DATA_DIR@%$XMMS_DATA_DIR%g s%@XMMS_PLUGIN_DIR@%$XMMS_PLUGIN_DIR%g s%@XMMS_VISUALIZATION_PLUGIN_DIR@%$XMMS_VISUALIZATION_PLUGIN_DIR%g s%@XMMS_INPUT_PLUGIN_DIR@%$XMMS_INPUT_PLUGIN_DIR%g s%@XMMS_OUTPUT_PLUGIN_DIR@%$XMMS_OUTPUT_PLUGIN_DIR%g s%@XMMS_GENERAL_PLUGIN_DIR@%$XMMS_GENERAL_PLUGIN_DIR%g s%@XMMS_EFFECT_PLUGIN_DIR@%$XMMS_EFFECT_PLUGIN_DIR%g s%@plugindir@%$plugindir%g CEOF EOF cat >> $CONFIG_STATUS <<\EOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF exit 0 EOF chmod +x $CONFIG_STATUS rm -fr confdefs* $ac_clean_files test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 echo "Enjoy" btexmms/src/0040775000076400007640000000000007543653464012020 5ustar nikenikebtexmms/src/Makefile.in0100664000076400007640000002350107543647450014061 0ustar nikenike# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ bindir = @bindir@ sbindir = @sbindir@ libexecdir = @libexecdir@ datadir = @datadir@ sysconfdir = @sysconfdir@ sharedstatedir = @sharedstatedir@ localstatedir = @localstatedir@ infodir = @infodir@ mandir = @mandir@ includedir = @includedir@ oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = .. ACLOCAL = @ACLOCAL@ AUTOCONF = @AUTOCONF@ AUTOMAKE = @AUTOMAKE@ AUTOHEADER = @AUTOHEADER@ INSTALL = @INSTALL@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = @INSTALL_DATA@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ transform = @program_transform_name@ NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = @host_alias@ host_triplet = @host@ AS = @AS@ AWK = @AWK@ CC = @CC@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ EXEEXT = @EXEEXT@ GLIB_CFLAGS = @GLIB_CFLAGS@ GLIB_CONFIG = @GLIB_CONFIG@ GLIB_LIBS = @GLIB_LIBS@ GTK_CFLAGS = @GTK_CFLAGS@ GTK_CONFIG = @GTK_CONFIG@ GTK_LIBS = @GTK_LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ MAKEINFO = @MAKEINFO@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ RANLIB = @RANLIB@ STRIP = @STRIP@ VERSION = @VERSION@ XMMS_CFLAGS = @XMMS_CFLAGS@ XMMS_CONFIG = @XMMS_CONFIG@ XMMS_DATA_DIR = @XMMS_DATA_DIR@ XMMS_EFFECT_PLUGIN_DIR = @XMMS_EFFECT_PLUGIN_DIR@ XMMS_GENERAL_PLUGIN_DIR = @XMMS_GENERAL_PLUGIN_DIR@ XMMS_INPUT_PLUGIN_DIR = @XMMS_INPUT_PLUGIN_DIR@ XMMS_LIBS = @XMMS_LIBS@ XMMS_OUTPUT_PLUGIN_DIR = @XMMS_OUTPUT_PLUGIN_DIR@ XMMS_PLUGIN_DIR = @XMMS_PLUGIN_DIR@ XMMS_VERSION = @XMMS_VERSION@ XMMS_VISUALIZATION_PLUGIN_DIR = @XMMS_VISUALIZATION_PLUGIN_DIR@ plugindir = @plugindir@ libdir = $(plugindir) lib_LTLIBRARIES = libbtexmms.la libbtexmms_la_LDFLAGS = -module -avoid-version libbtexmms_la_LIBADD = @XMMS_LIBS@ libbtexmms_la_SOURCES = bte.h btio.h plugin.c about.c configure.c btio.c mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_CLEAN_FILES = LTLIBRARIES = $(lib_LTLIBRARIES) DEFS = @DEFS@ -I. -I$(srcdir) CPPFLAGS = @CPPFLAGS@ LDFLAGS = @LDFLAGS@ LIBS = @LIBS@ libbtexmms_la_DEPENDENCIES = libbtexmms_la_OBJECTS = plugin.lo about.lo configure.lo btio.lo CFLAGS = @CFLAGS@ COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ DIST_COMMON = Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = gtar GZIP_ENV = --best DEP_FILES = .deps/about.P .deps/btio.P .deps/configure.P .deps/plugin.P SOURCES = $(libbtexmms_la_SOURCES) OBJECTS = $(libbtexmms_la_OBJECTS) all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .lo .o .obj .s $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status mostlyclean-libLTLIBRARIES: clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) distclean-libLTLIBRARIES: maintainer-clean-libLTLIBRARIES: install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(libdir) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \ $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) list='$(lib_LTLIBRARIES)'; for p in $$list; do \ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ done # FIXME: We should only use cygpath when building on Windows, # and only if it is available. .c.obj: $(COMPILE) -c `cygpath -w $<` .s.o: $(COMPILE) -c $< .S.o: $(COMPILE) -c $< mostlyclean-compile: -rm -f *.o core *.core -rm -f *.$(OBJEXT) clean-compile: distclean-compile: -rm -f *.tab.c maintainer-clean-compile: .s.lo: $(LIBTOOL) --mode=compile $(COMPILE) -c $< .S.lo: $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: maintainer-clean-libtool: libbtexmms.la: $(libbtexmms_la_OBJECTS) $(libbtexmms_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(libbtexmms_la_LDFLAGS) $(libbtexmms_la_OBJECTS) $(libbtexmms_la_LIBADD) $(LIBS) tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = src distdir: $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -include $(DEP_FILES) mostlyclean-depend: clean-depend: distclean-depend: -rm -rf .deps maintainer-clean-depend: %.o: %.c @echo '$(COMPILE) -c $<'; \ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< @-cp .deps/$(*F).pp .deps/$(*F).P; \ tr ' ' '\012' < .deps/$(*F).pp \ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ >> .deps/$(*F).P; \ rm .deps/$(*F).pp %.lo: %.c @echo '$(LTCOMPILE) -c $<'; \ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ < .deps/$(*F).pp > .deps/$(*F).P; \ tr ' ' '\012' < .deps/$(*F).pp \ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ >> .deps/$(*F).P; \ rm -f .deps/$(*F).pp info-am: info: info-am dvi-am: dvi: dvi-am check-am: all-am check: check-am installcheck-am: installcheck: installcheck-am install-exec-am: install-libLTLIBRARIES install-exec: install-exec-am install-data-am: install-data: install-data-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am uninstall-am: uninstall-libLTLIBRARIES uninstall: uninstall-am all-am: Makefile $(LTLIBRARIES) all-redirect: all-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: $(mkinstalldirs) $(DESTDIR)$(libdir) mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ mostlyclean-generic mostlyclean: mostlyclean-am clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \ clean-depend clean-generic mostlyclean-am clean: clean-am distclean-am: distclean-libLTLIBRARIES distclean-compile \ distclean-libtool distclean-tags distclean-depend \ distclean-generic clean-am -rm -f libtool distclean: distclean-am maintainer-clean-am: maintainer-clean-libLTLIBRARIES \ maintainer-clean-compile maintainer-clean-libtool \ maintainer-clean-tags maintainer-clean-depend \ maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am .PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \ clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \ uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \ distclean-compile clean-compile maintainer-clean-compile \ mostlyclean-libtool distclean-libtool clean-libtool \ maintainer-clean-libtool tags mostlyclean-tags distclean-tags \ clean-tags maintainer-clean-tags distdir mostlyclean-depend \ distclean-depend clean-depend maintainer-clean-depend info-am info \ dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ install-exec install-data-am install-data install-am install \ uninstall-am uninstall all-redirect all-am all installdirs \ mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: btexmms/src/Makefile0100664000076400007640000002464307543647537013472 0ustar nikenike# Generated automatically from Makefile.in by configure. # Makefile.in generated automatically by automake 1.4-p5 from Makefile.am # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = /bin/sh srcdir = . top_srcdir = .. prefix = /usr/local exec_prefix = ${prefix} bindir = ${exec_prefix}/bin sbindir = ${exec_prefix}/sbin libexecdir = ${exec_prefix}/libexec datadir = ${prefix}/share sysconfdir = ${prefix}/etc sharedstatedir = ${prefix}/com localstatedir = ${prefix}/var infodir = ${prefix}/info mandir = ${prefix}/man includedir = ${prefix}/include oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/btexmms pkglibdir = $(libdir)/btexmms pkgincludedir = $(includedir)/btexmms top_builddir = .. ACLOCAL = aclocal AUTOCONF = autoconf AUTOMAKE = automake AUTOHEADER = autoheader INSTALL = /usr/bin/install -c INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = ${INSTALL} -m 644 INSTALL_SCRIPT = ${INSTALL_PROGRAM} transform = s,x,x, NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = i586-pc-linux-gnu host_triplet = i586-pc-linux-gnu AS = @AS@ AWK = gawk CC = gcc DLLTOOL = @DLLTOOL@ ECHO = echo EXEEXT = GLIB_CFLAGS = -I/usr/lib/glib/include GLIB_CONFIG = /usr/bin/glib-config GLIB_LIBS = -L/usr/lib -lglib GTK_CFLAGS = -I/usr/lib/glib/include -I/usr/X11R6/include GTK_CONFIG = /usr/bin/gtk-config GTK_LIBS = -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s MAKEINFO = makeinfo OBJDUMP = @OBJDUMP@ OBJEXT = o PACKAGE = btexmms RANLIB = ranlib STRIP = strip VERSION = 0.4 XMMS_CFLAGS = -I/usr/local/include -I/usr/local/include/xmms -I/usr/lib/glib/include -I/usr/X11R6/include XMMS_CONFIG = /usr/local/bin/xmms-config XMMS_DATA_DIR = /usr/local/share/xmms XMMS_EFFECT_PLUGIN_DIR = /usr/local/lib/xmms/Effect XMMS_GENERAL_PLUGIN_DIR = /usr/local/lib/xmms/General XMMS_INPUT_PLUGIN_DIR = /usr/local/lib/xmms/Input XMMS_LIBS = -L/usr/local/lib -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm -lxmms XMMS_OUTPUT_PLUGIN_DIR = /usr/local/lib/xmms/Output XMMS_PLUGIN_DIR = /usr/local/lib/xmms XMMS_VERSION = 1.2.7 XMMS_VISUALIZATION_PLUGIN_DIR = /usr/local/lib/xmms/Visualization plugindir = /usr/local/lib/xmms/Input libdir = $(plugindir) lib_LTLIBRARIES = libbtexmms.la libbtexmms_la_LDFLAGS = -module -avoid-version libbtexmms_la_LIBADD = -L/usr/local/lib -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm -lxmms libbtexmms_la_SOURCES = bte.h btio.h plugin.c about.c configure.c btio.c mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_CLEAN_FILES = LTLIBRARIES = $(lib_LTLIBRARIES) DEFS = -DPACKAGE=\"btexmms\" -DVERSION=\"0.4\" -DHAVE_DLFCN_H=1 -I. -I$(srcdir) CPPFLAGS = LDFLAGS = LIBS = libbtexmms_la_DEPENDENCIES = libbtexmms_la_OBJECTS = plugin.lo about.lo configure.lo btio.lo CFLAGS = -g -O2 -Wall -D_REENTRANT -I/usr/lib/glib/include -I/usr/X11R6/include COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ DIST_COMMON = Makefile.am Makefile.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = gtar GZIP_ENV = --best DEP_FILES = .deps/about.P .deps/btio.P .deps/configure.P .deps/plugin.P SOURCES = $(libbtexmms_la_SOURCES) OBJECTS = $(libbtexmms_la_OBJECTS) all: all-redirect .SUFFIXES: .SUFFIXES: .S .c .lo .o .obj .s $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status mostlyclean-libLTLIBRARIES: clean-libLTLIBRARIES: -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) distclean-libLTLIBRARIES: maintainer-clean-libLTLIBRARIES: install-libLTLIBRARIES: $(lib_LTLIBRARIES) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(libdir) @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \ $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \ else :; fi; \ done uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) list='$(lib_LTLIBRARIES)'; for p in $$list; do \ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ done # FIXME: We should only use cygpath when building on Windows, # and only if it is available. .c.obj: $(COMPILE) -c `cygpath -w $<` .s.o: $(COMPILE) -c $< .S.o: $(COMPILE) -c $< mostlyclean-compile: -rm -f *.o core *.core -rm -f *.$(OBJEXT) clean-compile: distclean-compile: -rm -f *.tab.c maintainer-clean-compile: .s.lo: $(LIBTOOL) --mode=compile $(COMPILE) -c $< .S.lo: $(LIBTOOL) --mode=compile $(COMPILE) -c $< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: maintainer-clean-libtool: libbtexmms.la: $(libbtexmms_la_OBJECTS) $(libbtexmms_la_DEPENDENCIES) $(LINK) -rpath $(libdir) $(libbtexmms_la_LDFLAGS) $(libbtexmms_la_OBJECTS) $(libbtexmms_la_LIBADD) $(LIBS) tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) subdir = src distdir: $(DISTFILES) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(top_distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) -include $(DEP_FILES) mostlyclean-depend: clean-depend: distclean-depend: -rm -rf .deps maintainer-clean-depend: %.o: %.c @echo '$(COMPILE) -c $<'; \ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< @-cp .deps/$(*F).pp .deps/$(*F).P; \ tr ' ' '\012' < .deps/$(*F).pp \ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ >> .deps/$(*F).P; \ rm .deps/$(*F).pp %.lo: %.c @echo '$(LTCOMPILE) -c $<'; \ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ < .deps/$(*F).pp > .deps/$(*F).P; \ tr ' ' '\012' < .deps/$(*F).pp \ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ >> .deps/$(*F).P; \ rm -f .deps/$(*F).pp info-am: info: info-am dvi-am: dvi: dvi-am check-am: all-am check: check-am installcheck-am: installcheck: installcheck-am install-exec-am: install-libLTLIBRARIES install-exec: install-exec-am install-data-am: install-data: install-data-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-am uninstall-am: uninstall-libLTLIBRARIES uninstall: uninstall-am all-am: Makefile $(LTLIBRARIES) all-redirect: all-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: $(mkinstalldirs) $(DESTDIR)$(libdir) mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ mostlyclean-generic mostlyclean: mostlyclean-am clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \ clean-depend clean-generic mostlyclean-am clean: clean-am distclean-am: distclean-libLTLIBRARIES distclean-compile \ distclean-libtool distclean-tags distclean-depend \ distclean-generic clean-am -rm -f libtool distclean: distclean-am maintainer-clean-am: maintainer-clean-libLTLIBRARIES \ maintainer-clean-compile maintainer-clean-libtool \ maintainer-clean-tags maintainer-clean-depend \ maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-am .PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \ clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \ uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \ distclean-compile clean-compile maintainer-clean-compile \ mostlyclean-libtool distclean-libtool clean-libtool \ maintainer-clean-libtool tags mostlyclean-tags distclean-tags \ clean-tags maintainer-clean-tags distdir mostlyclean-depend \ distclean-depend clean-depend maintainer-clean-depend info-am info \ dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ install-exec install-data-am install-data install-am install \ uninstall-am uninstall all-redirect all-am all installdirs \ mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: btexmms/src/Makefile.am0100664000076400007640000000033607543357405014047 0ustar nikenikelibdir = $(plugindir) lib_LTLIBRARIES = libbtexmms.la libbtexmms_la_LDFLAGS = -module -avoid-version libbtexmms_la_LIBADD = @XMMS_LIBS@ libbtexmms_la_SOURCES = bte.h btio.h plugin.c about.c configure.c btio.c btexmms/src/.deps/0040775000076400007640000000000007543650045013021 5ustar nikenikebtexmms/src/.deps/plugin.P0100664000076400007640000002633107543650022014435 0ustar nikenikeplugin.lo plugin.o : plugin.c bte.h /usr/include/stdio.h /usr/include/features.h \ /usr/include/sys/cdefs.h /usr/include/gnu/stubs.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h \ /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \ /usr/include/bits/sched.h /usr/include/libio.h /usr/include/_G_config.h \ /usr/include/wchar.h /usr/include/bits/wchar.h /usr/include/gconv.h \ /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \ /usr/include/string.h /usr/include/bits/string.h \ /usr/include/bits/string2.h /usr/include/endian.h \ /usr/include/bits/endian.h /usr/include/stdlib.h /usr/include/ctype.h \ /usr/include/math.h /usr/include/bits/huge_val.h \ /usr/include/bits/mathdef.h /usr/include/bits/mathcalls.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/float.h \ /usr/include/bits/mathinline.h /usr/include/unistd.h \ /usr/include/bits/posix_opt.h /usr/include/bits/confname.h \ /usr/include/getopt.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \ /usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \ /usr/include/bits/select.h /usr/include/bits/sigset.h \ /usr/include/sys/sysmacros.h /usr/include/termios.h \ /usr/include/bits/termios.h /usr/include/sys/ttydefaults.h \ /usr/include/sys/time.h /usr/include/bits/time.h /usr/include/errno.h \ /usr/include/bits/errno.h /usr/include/linux/errno.h \ /usr/include/asm/errno.h /usr/include/glib.h \ /usr/lib/glib/include/glibconfig.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/limits.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/syslimits.h \ /usr/include/limits.h /usr/include/bits/posix1_lim.h \ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \ /usr/include/bits/posix2_lim.h /usr/include/gtk/gtk.h \ /usr/include/gdk/gdk.h /usr/include/gdk/gdktypes.h \ /usr/include/gdk/gdkcursors.h /usr/include/gdk/gdkrgb.h \ /usr/include/gtk/gtkaccelgroup.h /usr/include/gtk/gtkobject.h \ /usr/include/gtk/gtkarg.h /usr/include/gtk/gtktypeutils.h \ /usr/include/gtk/gtktypebuiltins.h /usr/include/gtk/gtkenums.h \ /usr/include/gtk/gtkdebug.h /usr/include/gtk/gtkaccellabel.h \ /usr/include/gtk/gtklabel.h /usr/include/gtk/gtkmisc.h \ /usr/include/gtk/gtkwidget.h /usr/include/gtk/gtkadjustment.h \ /usr/include/gtk/gtkdata.h /usr/include/gtk/gtkstyle.h \ /usr/include/gtk/gtkalignment.h /usr/include/gtk/gtkbin.h \ /usr/include/gtk/gtkcontainer.h /usr/include/gtk/gtkaspectframe.h \ /usr/include/gtk/gtkframe.h /usr/include/gtk/gtkarrow.h \ /usr/include/gtk/gtkbindings.h /usr/include/gtk/gtkbox.h \ /usr/include/gtk/gtkbbox.h /usr/include/gtk/gtkbutton.h \ /usr/include/gtk/gtkcalendar.h /usr/include/gtk/gtksignal.h \ /usr/include/gtk/gtkmarshal.h /usr/include/gtk/gtkcheckbutton.h \ /usr/include/gtk/gtktogglebutton.h /usr/include/gtk/gtkcheckmenuitem.h \ /usr/include/gtk/gtkmenuitem.h /usr/include/gtk/gtkitem.h \ /usr/include/gtk/gtkclist.h /usr/include/gtk/gtkhscrollbar.h \ /usr/include/gtk/gtkscrollbar.h /usr/include/gtk/gtkrange.h \ /usr/include/gtk/gtkvscrollbar.h /usr/include/gtk/gtkcolorsel.h \ /usr/include/gtk/gtkwindow.h /usr/include/gtk/gtkvbox.h \ /usr/include/gtk/gtkpreview.h /usr/include/gtk/gtkentry.h \ /usr/include/gtk/gtkeditable.h /usr/include/gtk/gtkhbox.h \ /usr/include/gtk/gtkmain.h /usr/include/gtk/gtkscale.h \ /usr/include/gtk/gtkhscale.h /usr/include/gtk/gtktable.h \ /usr/include/gtk/gtkeventbox.h /usr/include/gtk/gtkcombo.h \ /usr/include/gtk/gtkcompat.h /usr/include/gtk/gtkctree.h \ /usr/include/gtk/gtkcurve.h /usr/include/gtk/gtkdrawingarea.h \ /usr/include/gtk/gtkdialog.h /usr/include/gtk/gtkdnd.h \ /usr/include/gtk/gtkselection.h /usr/include/gtk/gtkfeatures.h \ /usr/include/gtk/gtkfilesel.h /usr/include/gtk/gtkfixed.h \ /usr/include/gtk/gtkfontsel.h /usr/include/gtk/gtknotebook.h \ /usr/include/gtk/gtkgamma.h /usr/include/gtk/gtkgc.h \ /usr/include/gtk/gtkhandlebox.h /usr/include/gtk/gtkhbbox.h \ /usr/include/gtk/gtkhpaned.h /usr/include/gtk/gtkpaned.h \ /usr/include/gtk/gtkhruler.h /usr/include/gtk/gtkruler.h \ /usr/include/gtk/gtkhseparator.h /usr/include/gtk/gtkseparator.h \ /usr/include/gtk/gtkimage.h /usr/include/gtk/gtkinputdialog.h \ /usr/include/gtk/gtkitemfactory.h /usr/include/gtk/gtkmenufactory.h \ /usr/include/gtk/gtklayout.h /usr/include/gtk/gtklist.h \ /usr/include/gtk/gtklistitem.h /usr/include/gtk/gtkmenu.h \ /usr/include/gtk/gtkmenushell.h /usr/include/gtk/gtkmenubar.h \ /usr/include/gtk/gtkoptionmenu.h /usr/include/gtk/gtkpacker.h \ /usr/include/gtk/gtkpixmap.h /usr/include/gtk/gtkplug.h \ /usr/include/gtk/gtkprogress.h /usr/include/gtk/gtkprogressbar.h \ /usr/include/gtk/gtkradiobutton.h /usr/include/gtk/gtkradiomenuitem.h \ /usr/include/gtk/gtkrc.h /usr/include/gtk/gtkscrolledwindow.h \ /usr/include/gtk/gtkviewport.h /usr/include/gtk/gtksocket.h \ /usr/include/gtk/gtkspinbutton.h /usr/include/gtk/gtkstatusbar.h \ /usr/include/gtk/gtktearoffmenuitem.h /usr/include/gtk/gtktext.h \ /usr/include/gtk/gtkthemes.h /usr/include/gtk/gtktipsquery.h \ /usr/include/gtk/gtktoolbar.h /usr/include/gtk/gtktooltips.h \ /usr/include/gtk/gtktree.h /usr/include/gtk/gtktreeitem.h \ /usr/include/gtk/gtkvbbox.h /usr/include/gtk/gtkvpaned.h \ /usr/include/gtk/gtkvruler.h /usr/include/gtk/gtkvscale.h \ /usr/include/gtk/gtkvseparator.h /usr/include/pthread.h \ /usr/include/sched.h /usr/include/signal.h /usr/include/bits/initspin.h \ /usr/include/bits/sigthread.h /usr/local/include/xmms/plugin.h \ /usr/local/include/xmms/util.h /usr/local/include/xmms/xmmsctrl.h \ /usr/local/include/xmms/configfile.h btio.h plugin.c : bte.h : /usr/include/stdio.h : /usr/include/features.h : /usr/include/sys/cdefs.h : /usr/include/gnu/stubs.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h : /usr/include/bits/types.h : /usr/include/bits/pthreadtypes.h : /usr/include/bits/sched.h : /usr/include/libio.h : /usr/include/_G_config.h : /usr/include/wchar.h : /usr/include/bits/wchar.h : /usr/include/gconv.h : /usr/include/bits/stdio_lim.h : /usr/include/bits/stdio.h : /usr/include/string.h : /usr/include/bits/string.h : /usr/include/bits/string2.h : /usr/include/endian.h : /usr/include/bits/endian.h : /usr/include/stdlib.h : /usr/include/ctype.h : /usr/include/math.h : /usr/include/bits/huge_val.h : /usr/include/bits/mathdef.h : /usr/include/bits/mathcalls.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/float.h : /usr/include/bits/mathinline.h : /usr/include/unistd.h : /usr/include/bits/posix_opt.h : /usr/include/bits/confname.h : /usr/include/getopt.h : /usr/include/fcntl.h : /usr/include/bits/fcntl.h : /usr/include/sys/types.h : /usr/include/time.h : /usr/include/sys/select.h : /usr/include/bits/select.h : /usr/include/bits/sigset.h : /usr/include/sys/sysmacros.h : /usr/include/termios.h : /usr/include/bits/termios.h : /usr/include/sys/ttydefaults.h : /usr/include/sys/time.h : /usr/include/bits/time.h : /usr/include/errno.h : /usr/include/bits/errno.h : /usr/include/linux/errno.h : /usr/include/asm/errno.h : /usr/include/glib.h : /usr/lib/glib/include/glibconfig.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/limits.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/syslimits.h : /usr/include/limits.h : /usr/include/bits/posix1_lim.h : /usr/include/bits/local_lim.h : /usr/include/linux/limits.h : /usr/include/bits/posix2_lim.h : /usr/include/gtk/gtk.h : /usr/include/gdk/gdk.h : /usr/include/gdk/gdktypes.h : /usr/include/gdk/gdkcursors.h : /usr/include/gdk/gdkrgb.h : /usr/include/gtk/gtkaccelgroup.h : /usr/include/gtk/gtkobject.h : /usr/include/gtk/gtkarg.h : /usr/include/gtk/gtktypeutils.h : /usr/include/gtk/gtktypebuiltins.h : /usr/include/gtk/gtkenums.h : /usr/include/gtk/gtkdebug.h : /usr/include/gtk/gtkaccellabel.h : /usr/include/gtk/gtklabel.h : /usr/include/gtk/gtkmisc.h : /usr/include/gtk/gtkwidget.h : /usr/include/gtk/gtkadjustment.h : /usr/include/gtk/gtkdata.h : /usr/include/gtk/gtkstyle.h : /usr/include/gtk/gtkalignment.h : /usr/include/gtk/gtkbin.h : /usr/include/gtk/gtkcontainer.h : /usr/include/gtk/gtkaspectframe.h : /usr/include/gtk/gtkframe.h : /usr/include/gtk/gtkarrow.h : /usr/include/gtk/gtkbindings.h : /usr/include/gtk/gtkbox.h : /usr/include/gtk/gtkbbox.h : /usr/include/gtk/gtkbutton.h : /usr/include/gtk/gtkcalendar.h : /usr/include/gtk/gtksignal.h : /usr/include/gtk/gtkmarshal.h : /usr/include/gtk/gtkcheckbutton.h : /usr/include/gtk/gtktogglebutton.h : /usr/include/gtk/gtkcheckmenuitem.h : /usr/include/gtk/gtkmenuitem.h : /usr/include/gtk/gtkitem.h : /usr/include/gtk/gtkclist.h : /usr/include/gtk/gtkhscrollbar.h : /usr/include/gtk/gtkscrollbar.h : /usr/include/gtk/gtkrange.h : /usr/include/gtk/gtkvscrollbar.h : /usr/include/gtk/gtkcolorsel.h : /usr/include/gtk/gtkwindow.h : /usr/include/gtk/gtkvbox.h : /usr/include/gtk/gtkpreview.h : /usr/include/gtk/gtkentry.h : /usr/include/gtk/gtkeditable.h : /usr/include/gtk/gtkhbox.h : /usr/include/gtk/gtkmain.h : /usr/include/gtk/gtkscale.h : /usr/include/gtk/gtkhscale.h : /usr/include/gtk/gtktable.h : /usr/include/gtk/gtkeventbox.h : /usr/include/gtk/gtkcombo.h : /usr/include/gtk/gtkcompat.h : /usr/include/gtk/gtkctree.h : /usr/include/gtk/gtkcurve.h : /usr/include/gtk/gtkdrawingarea.h : /usr/include/gtk/gtkdialog.h : /usr/include/gtk/gtkdnd.h : /usr/include/gtk/gtkselection.h : /usr/include/gtk/gtkfeatures.h : /usr/include/gtk/gtkfilesel.h : /usr/include/gtk/gtkfixed.h : /usr/include/gtk/gtkfontsel.h : /usr/include/gtk/gtknotebook.h : /usr/include/gtk/gtkgamma.h : /usr/include/gtk/gtkgc.h : /usr/include/gtk/gtkhandlebox.h : /usr/include/gtk/gtkhbbox.h : /usr/include/gtk/gtkhpaned.h : /usr/include/gtk/gtkpaned.h : /usr/include/gtk/gtkhruler.h : /usr/include/gtk/gtkruler.h : /usr/include/gtk/gtkhseparator.h : /usr/include/gtk/gtkseparator.h : /usr/include/gtk/gtkimage.h : /usr/include/gtk/gtkinputdialog.h : /usr/include/gtk/gtkitemfactory.h : /usr/include/gtk/gtkmenufactory.h : /usr/include/gtk/gtklayout.h : /usr/include/gtk/gtklist.h : /usr/include/gtk/gtklistitem.h : /usr/include/gtk/gtkmenu.h : /usr/include/gtk/gtkmenushell.h : /usr/include/gtk/gtkmenubar.h : /usr/include/gtk/gtkoptionmenu.h : /usr/include/gtk/gtkpacker.h : /usr/include/gtk/gtkpixmap.h : /usr/include/gtk/gtkplug.h : /usr/include/gtk/gtkprogress.h : /usr/include/gtk/gtkprogressbar.h : /usr/include/gtk/gtkradiobutton.h : /usr/include/gtk/gtkradiomenuitem.h : /usr/include/gtk/gtkrc.h : /usr/include/gtk/gtkscrolledwindow.h : /usr/include/gtk/gtkviewport.h : /usr/include/gtk/gtksocket.h : /usr/include/gtk/gtkspinbutton.h : /usr/include/gtk/gtkstatusbar.h : /usr/include/gtk/gtktearoffmenuitem.h : /usr/include/gtk/gtktext.h : /usr/include/gtk/gtkthemes.h : /usr/include/gtk/gtktipsquery.h : /usr/include/gtk/gtktoolbar.h : /usr/include/gtk/gtktooltips.h : /usr/include/gtk/gtktree.h : /usr/include/gtk/gtktreeitem.h : /usr/include/gtk/gtkvbbox.h : /usr/include/gtk/gtkvpaned.h : /usr/include/gtk/gtkvruler.h : /usr/include/gtk/gtkvscale.h : /usr/include/gtk/gtkvseparator.h : /usr/include/pthread.h : /usr/include/sched.h : /usr/include/signal.h : /usr/include/bits/initspin.h : /usr/include/bits/sigthread.h : /usr/local/include/xmms/plugin.h : /usr/local/include/xmms/util.h : /usr/local/include/xmms/xmmsctrl.h : /usr/local/include/xmms/configfile.h : btio.h : btexmms/src/.deps/about.P0100664000076400007640000002575107543650027014263 0ustar nikenikeabout.lo about.o : about.c bte.h /usr/include/stdio.h /usr/include/features.h \ /usr/include/sys/cdefs.h /usr/include/gnu/stubs.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h \ /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \ /usr/include/bits/sched.h /usr/include/libio.h /usr/include/_G_config.h \ /usr/include/wchar.h /usr/include/bits/wchar.h /usr/include/gconv.h \ /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \ /usr/include/string.h /usr/include/bits/string.h \ /usr/include/bits/string2.h /usr/include/endian.h \ /usr/include/bits/endian.h /usr/include/stdlib.h /usr/include/ctype.h \ /usr/include/math.h /usr/include/bits/huge_val.h \ /usr/include/bits/mathdef.h /usr/include/bits/mathcalls.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/float.h \ /usr/include/bits/mathinline.h /usr/include/unistd.h \ /usr/include/bits/posix_opt.h /usr/include/bits/confname.h \ /usr/include/getopt.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \ /usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \ /usr/include/bits/select.h /usr/include/bits/sigset.h \ /usr/include/sys/sysmacros.h /usr/include/termios.h \ /usr/include/bits/termios.h /usr/include/sys/ttydefaults.h \ /usr/include/sys/time.h /usr/include/bits/time.h /usr/include/errno.h \ /usr/include/bits/errno.h /usr/include/linux/errno.h \ /usr/include/asm/errno.h /usr/include/glib.h \ /usr/lib/glib/include/glibconfig.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/limits.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/syslimits.h \ /usr/include/limits.h /usr/include/bits/posix1_lim.h \ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \ /usr/include/bits/posix2_lim.h /usr/include/gtk/gtk.h \ /usr/include/gdk/gdk.h /usr/include/gdk/gdktypes.h \ /usr/include/gdk/gdkcursors.h /usr/include/gdk/gdkrgb.h \ /usr/include/gtk/gtkaccelgroup.h /usr/include/gtk/gtkobject.h \ /usr/include/gtk/gtkarg.h /usr/include/gtk/gtktypeutils.h \ /usr/include/gtk/gtktypebuiltins.h /usr/include/gtk/gtkenums.h \ /usr/include/gtk/gtkdebug.h /usr/include/gtk/gtkaccellabel.h \ /usr/include/gtk/gtklabel.h /usr/include/gtk/gtkmisc.h \ /usr/include/gtk/gtkwidget.h /usr/include/gtk/gtkadjustment.h \ /usr/include/gtk/gtkdata.h /usr/include/gtk/gtkstyle.h \ /usr/include/gtk/gtkalignment.h /usr/include/gtk/gtkbin.h \ /usr/include/gtk/gtkcontainer.h /usr/include/gtk/gtkaspectframe.h \ /usr/include/gtk/gtkframe.h /usr/include/gtk/gtkarrow.h \ /usr/include/gtk/gtkbindings.h /usr/include/gtk/gtkbox.h \ /usr/include/gtk/gtkbbox.h /usr/include/gtk/gtkbutton.h \ /usr/include/gtk/gtkcalendar.h /usr/include/gtk/gtksignal.h \ /usr/include/gtk/gtkmarshal.h /usr/include/gtk/gtkcheckbutton.h \ /usr/include/gtk/gtktogglebutton.h /usr/include/gtk/gtkcheckmenuitem.h \ /usr/include/gtk/gtkmenuitem.h /usr/include/gtk/gtkitem.h \ /usr/include/gtk/gtkclist.h /usr/include/gtk/gtkhscrollbar.h \ /usr/include/gtk/gtkscrollbar.h /usr/include/gtk/gtkrange.h \ /usr/include/gtk/gtkvscrollbar.h /usr/include/gtk/gtkcolorsel.h \ /usr/include/gtk/gtkwindow.h /usr/include/gtk/gtkvbox.h \ /usr/include/gtk/gtkpreview.h /usr/include/gtk/gtkentry.h \ /usr/include/gtk/gtkeditable.h /usr/include/gtk/gtkhbox.h \ /usr/include/gtk/gtkmain.h /usr/include/gtk/gtkscale.h \ /usr/include/gtk/gtkhscale.h /usr/include/gtk/gtktable.h \ /usr/include/gtk/gtkeventbox.h /usr/include/gtk/gtkcombo.h \ /usr/include/gtk/gtkcompat.h /usr/include/gtk/gtkctree.h \ /usr/include/gtk/gtkcurve.h /usr/include/gtk/gtkdrawingarea.h \ /usr/include/gtk/gtkdialog.h /usr/include/gtk/gtkdnd.h \ /usr/include/gtk/gtkselection.h /usr/include/gtk/gtkfeatures.h \ /usr/include/gtk/gtkfilesel.h /usr/include/gtk/gtkfixed.h \ /usr/include/gtk/gtkfontsel.h /usr/include/gtk/gtknotebook.h \ /usr/include/gtk/gtkgamma.h /usr/include/gtk/gtkgc.h \ /usr/include/gtk/gtkhandlebox.h /usr/include/gtk/gtkhbbox.h \ /usr/include/gtk/gtkhpaned.h /usr/include/gtk/gtkpaned.h \ /usr/include/gtk/gtkhruler.h /usr/include/gtk/gtkruler.h \ /usr/include/gtk/gtkhseparator.h /usr/include/gtk/gtkseparator.h \ /usr/include/gtk/gtkimage.h /usr/include/gtk/gtkinputdialog.h \ /usr/include/gtk/gtkitemfactory.h /usr/include/gtk/gtkmenufactory.h \ /usr/include/gtk/gtklayout.h /usr/include/gtk/gtklist.h \ /usr/include/gtk/gtklistitem.h /usr/include/gtk/gtkmenu.h \ /usr/include/gtk/gtkmenushell.h /usr/include/gtk/gtkmenubar.h \ /usr/include/gtk/gtkoptionmenu.h /usr/include/gtk/gtkpacker.h \ /usr/include/gtk/gtkpixmap.h /usr/include/gtk/gtkplug.h \ /usr/include/gtk/gtkprogress.h /usr/include/gtk/gtkprogressbar.h \ /usr/include/gtk/gtkradiobutton.h /usr/include/gtk/gtkradiomenuitem.h \ /usr/include/gtk/gtkrc.h /usr/include/gtk/gtkscrolledwindow.h \ /usr/include/gtk/gtkviewport.h /usr/include/gtk/gtksocket.h \ /usr/include/gtk/gtkspinbutton.h /usr/include/gtk/gtkstatusbar.h \ /usr/include/gtk/gtktearoffmenuitem.h /usr/include/gtk/gtktext.h \ /usr/include/gtk/gtkthemes.h /usr/include/gtk/gtktipsquery.h \ /usr/include/gtk/gtktoolbar.h /usr/include/gtk/gtktooltips.h \ /usr/include/gtk/gtktree.h /usr/include/gtk/gtktreeitem.h \ /usr/include/gtk/gtkvbbox.h /usr/include/gtk/gtkvpaned.h \ /usr/include/gtk/gtkvruler.h /usr/include/gtk/gtkvscale.h \ /usr/include/gtk/gtkvseparator.h /usr/include/pthread.h \ /usr/include/sched.h /usr/include/signal.h /usr/include/bits/initspin.h \ /usr/include/bits/sigthread.h /usr/local/include/xmms/plugin.h about.c : bte.h : /usr/include/stdio.h : /usr/include/features.h : /usr/include/sys/cdefs.h : /usr/include/gnu/stubs.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h : /usr/include/bits/types.h : /usr/include/bits/pthreadtypes.h : /usr/include/bits/sched.h : /usr/include/libio.h : /usr/include/_G_config.h : /usr/include/wchar.h : /usr/include/bits/wchar.h : /usr/include/gconv.h : /usr/include/bits/stdio_lim.h : /usr/include/bits/stdio.h : /usr/include/string.h : /usr/include/bits/string.h : /usr/include/bits/string2.h : /usr/include/endian.h : /usr/include/bits/endian.h : /usr/include/stdlib.h : /usr/include/ctype.h : /usr/include/math.h : /usr/include/bits/huge_val.h : /usr/include/bits/mathdef.h : /usr/include/bits/mathcalls.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/float.h : /usr/include/bits/mathinline.h : /usr/include/unistd.h : /usr/include/bits/posix_opt.h : /usr/include/bits/confname.h : /usr/include/getopt.h : /usr/include/fcntl.h : /usr/include/bits/fcntl.h : /usr/include/sys/types.h : /usr/include/time.h : /usr/include/sys/select.h : /usr/include/bits/select.h : /usr/include/bits/sigset.h : /usr/include/sys/sysmacros.h : /usr/include/termios.h : /usr/include/bits/termios.h : /usr/include/sys/ttydefaults.h : /usr/include/sys/time.h : /usr/include/bits/time.h : /usr/include/errno.h : /usr/include/bits/errno.h : /usr/include/linux/errno.h : /usr/include/asm/errno.h : /usr/include/glib.h : /usr/lib/glib/include/glibconfig.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/limits.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/syslimits.h : /usr/include/limits.h : /usr/include/bits/posix1_lim.h : /usr/include/bits/local_lim.h : /usr/include/linux/limits.h : /usr/include/bits/posix2_lim.h : /usr/include/gtk/gtk.h : /usr/include/gdk/gdk.h : /usr/include/gdk/gdktypes.h : /usr/include/gdk/gdkcursors.h : /usr/include/gdk/gdkrgb.h : /usr/include/gtk/gtkaccelgroup.h : /usr/include/gtk/gtkobject.h : /usr/include/gtk/gtkarg.h : /usr/include/gtk/gtktypeutils.h : /usr/include/gtk/gtktypebuiltins.h : /usr/include/gtk/gtkenums.h : /usr/include/gtk/gtkdebug.h : /usr/include/gtk/gtkaccellabel.h : /usr/include/gtk/gtklabel.h : /usr/include/gtk/gtkmisc.h : /usr/include/gtk/gtkwidget.h : /usr/include/gtk/gtkadjustment.h : /usr/include/gtk/gtkdata.h : /usr/include/gtk/gtkstyle.h : /usr/include/gtk/gtkalignment.h : /usr/include/gtk/gtkbin.h : /usr/include/gtk/gtkcontainer.h : /usr/include/gtk/gtkaspectframe.h : /usr/include/gtk/gtkframe.h : /usr/include/gtk/gtkarrow.h : /usr/include/gtk/gtkbindings.h : /usr/include/gtk/gtkbox.h : /usr/include/gtk/gtkbbox.h : /usr/include/gtk/gtkbutton.h : /usr/include/gtk/gtkcalendar.h : /usr/include/gtk/gtksignal.h : /usr/include/gtk/gtkmarshal.h : /usr/include/gtk/gtkcheckbutton.h : /usr/include/gtk/gtktogglebutton.h : /usr/include/gtk/gtkcheckmenuitem.h : /usr/include/gtk/gtkmenuitem.h : /usr/include/gtk/gtkitem.h : /usr/include/gtk/gtkclist.h : /usr/include/gtk/gtkhscrollbar.h : /usr/include/gtk/gtkscrollbar.h : /usr/include/gtk/gtkrange.h : /usr/include/gtk/gtkvscrollbar.h : /usr/include/gtk/gtkcolorsel.h : /usr/include/gtk/gtkwindow.h : /usr/include/gtk/gtkvbox.h : /usr/include/gtk/gtkpreview.h : /usr/include/gtk/gtkentry.h : /usr/include/gtk/gtkeditable.h : /usr/include/gtk/gtkhbox.h : /usr/include/gtk/gtkmain.h : /usr/include/gtk/gtkscale.h : /usr/include/gtk/gtkhscale.h : /usr/include/gtk/gtktable.h : /usr/include/gtk/gtkeventbox.h : /usr/include/gtk/gtkcombo.h : /usr/include/gtk/gtkcompat.h : /usr/include/gtk/gtkctree.h : /usr/include/gtk/gtkcurve.h : /usr/include/gtk/gtkdrawingarea.h : /usr/include/gtk/gtkdialog.h : /usr/include/gtk/gtkdnd.h : /usr/include/gtk/gtkselection.h : /usr/include/gtk/gtkfeatures.h : /usr/include/gtk/gtkfilesel.h : /usr/include/gtk/gtkfixed.h : /usr/include/gtk/gtkfontsel.h : /usr/include/gtk/gtknotebook.h : /usr/include/gtk/gtkgamma.h : /usr/include/gtk/gtkgc.h : /usr/include/gtk/gtkhandlebox.h : /usr/include/gtk/gtkhbbox.h : /usr/include/gtk/gtkhpaned.h : /usr/include/gtk/gtkpaned.h : /usr/include/gtk/gtkhruler.h : /usr/include/gtk/gtkruler.h : /usr/include/gtk/gtkhseparator.h : /usr/include/gtk/gtkseparator.h : /usr/include/gtk/gtkimage.h : /usr/include/gtk/gtkinputdialog.h : /usr/include/gtk/gtkitemfactory.h : /usr/include/gtk/gtkmenufactory.h : /usr/include/gtk/gtklayout.h : /usr/include/gtk/gtklist.h : /usr/include/gtk/gtklistitem.h : /usr/include/gtk/gtkmenu.h : /usr/include/gtk/gtkmenushell.h : /usr/include/gtk/gtkmenubar.h : /usr/include/gtk/gtkoptionmenu.h : /usr/include/gtk/gtkpacker.h : /usr/include/gtk/gtkpixmap.h : /usr/include/gtk/gtkplug.h : /usr/include/gtk/gtkprogress.h : /usr/include/gtk/gtkprogressbar.h : /usr/include/gtk/gtkradiobutton.h : /usr/include/gtk/gtkradiomenuitem.h : /usr/include/gtk/gtkrc.h : /usr/include/gtk/gtkscrolledwindow.h : /usr/include/gtk/gtkviewport.h : /usr/include/gtk/gtksocket.h : /usr/include/gtk/gtkspinbutton.h : /usr/include/gtk/gtkstatusbar.h : /usr/include/gtk/gtktearoffmenuitem.h : /usr/include/gtk/gtktext.h : /usr/include/gtk/gtkthemes.h : /usr/include/gtk/gtktipsquery.h : /usr/include/gtk/gtktoolbar.h : /usr/include/gtk/gtktooltips.h : /usr/include/gtk/gtktree.h : /usr/include/gtk/gtktreeitem.h : /usr/include/gtk/gtkvbbox.h : /usr/include/gtk/gtkvpaned.h : /usr/include/gtk/gtkvruler.h : /usr/include/gtk/gtkvscale.h : /usr/include/gtk/gtkvseparator.h : /usr/include/pthread.h : /usr/include/sched.h : /usr/include/signal.h : /usr/include/bits/initspin.h : /usr/include/bits/sigthread.h : /usr/local/include/xmms/plugin.h : btexmms/src/.deps/configure.P0100664000076400007640000002605707543650040015125 0ustar nikenikeconfigure.lo configure.o : configure.c bte.h /usr/include/stdio.h \ /usr/include/features.h /usr/include/sys/cdefs.h \ /usr/include/gnu/stubs.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h \ /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \ /usr/include/bits/sched.h /usr/include/libio.h /usr/include/_G_config.h \ /usr/include/wchar.h /usr/include/bits/wchar.h /usr/include/gconv.h \ /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \ /usr/include/string.h /usr/include/bits/string.h \ /usr/include/bits/string2.h /usr/include/endian.h \ /usr/include/bits/endian.h /usr/include/stdlib.h /usr/include/ctype.h \ /usr/include/math.h /usr/include/bits/huge_val.h \ /usr/include/bits/mathdef.h /usr/include/bits/mathcalls.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/float.h \ /usr/include/bits/mathinline.h /usr/include/unistd.h \ /usr/include/bits/posix_opt.h /usr/include/bits/confname.h \ /usr/include/getopt.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \ /usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \ /usr/include/bits/select.h /usr/include/bits/sigset.h \ /usr/include/sys/sysmacros.h /usr/include/termios.h \ /usr/include/bits/termios.h /usr/include/sys/ttydefaults.h \ /usr/include/sys/time.h /usr/include/bits/time.h /usr/include/errno.h \ /usr/include/bits/errno.h /usr/include/linux/errno.h \ /usr/include/asm/errno.h /usr/include/glib.h \ /usr/lib/glib/include/glibconfig.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/limits.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/syslimits.h \ /usr/include/limits.h /usr/include/bits/posix1_lim.h \ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \ /usr/include/bits/posix2_lim.h /usr/include/gtk/gtk.h \ /usr/include/gdk/gdk.h /usr/include/gdk/gdktypes.h \ /usr/include/gdk/gdkcursors.h /usr/include/gdk/gdkrgb.h \ /usr/include/gtk/gtkaccelgroup.h /usr/include/gtk/gtkobject.h \ /usr/include/gtk/gtkarg.h /usr/include/gtk/gtktypeutils.h \ /usr/include/gtk/gtktypebuiltins.h /usr/include/gtk/gtkenums.h \ /usr/include/gtk/gtkdebug.h /usr/include/gtk/gtkaccellabel.h \ /usr/include/gtk/gtklabel.h /usr/include/gtk/gtkmisc.h \ /usr/include/gtk/gtkwidget.h /usr/include/gtk/gtkadjustment.h \ /usr/include/gtk/gtkdata.h /usr/include/gtk/gtkstyle.h \ /usr/include/gtk/gtkalignment.h /usr/include/gtk/gtkbin.h \ /usr/include/gtk/gtkcontainer.h /usr/include/gtk/gtkaspectframe.h \ /usr/include/gtk/gtkframe.h /usr/include/gtk/gtkarrow.h \ /usr/include/gtk/gtkbindings.h /usr/include/gtk/gtkbox.h \ /usr/include/gtk/gtkbbox.h /usr/include/gtk/gtkbutton.h \ /usr/include/gtk/gtkcalendar.h /usr/include/gtk/gtksignal.h \ /usr/include/gtk/gtkmarshal.h /usr/include/gtk/gtkcheckbutton.h \ /usr/include/gtk/gtktogglebutton.h /usr/include/gtk/gtkcheckmenuitem.h \ /usr/include/gtk/gtkmenuitem.h /usr/include/gtk/gtkitem.h \ /usr/include/gtk/gtkclist.h /usr/include/gtk/gtkhscrollbar.h \ /usr/include/gtk/gtkscrollbar.h /usr/include/gtk/gtkrange.h \ /usr/include/gtk/gtkvscrollbar.h /usr/include/gtk/gtkcolorsel.h \ /usr/include/gtk/gtkwindow.h /usr/include/gtk/gtkvbox.h \ /usr/include/gtk/gtkpreview.h /usr/include/gtk/gtkentry.h \ /usr/include/gtk/gtkeditable.h /usr/include/gtk/gtkhbox.h \ /usr/include/gtk/gtkmain.h /usr/include/gtk/gtkscale.h \ /usr/include/gtk/gtkhscale.h /usr/include/gtk/gtktable.h \ /usr/include/gtk/gtkeventbox.h /usr/include/gtk/gtkcombo.h \ /usr/include/gtk/gtkcompat.h /usr/include/gtk/gtkctree.h \ /usr/include/gtk/gtkcurve.h /usr/include/gtk/gtkdrawingarea.h \ /usr/include/gtk/gtkdialog.h /usr/include/gtk/gtkdnd.h \ /usr/include/gtk/gtkselection.h /usr/include/gtk/gtkfeatures.h \ /usr/include/gtk/gtkfilesel.h /usr/include/gtk/gtkfixed.h \ /usr/include/gtk/gtkfontsel.h /usr/include/gtk/gtknotebook.h \ /usr/include/gtk/gtkgamma.h /usr/include/gtk/gtkgc.h \ /usr/include/gtk/gtkhandlebox.h /usr/include/gtk/gtkhbbox.h \ /usr/include/gtk/gtkhpaned.h /usr/include/gtk/gtkpaned.h \ /usr/include/gtk/gtkhruler.h /usr/include/gtk/gtkruler.h \ /usr/include/gtk/gtkhseparator.h /usr/include/gtk/gtkseparator.h \ /usr/include/gtk/gtkimage.h /usr/include/gtk/gtkinputdialog.h \ /usr/include/gtk/gtkitemfactory.h /usr/include/gtk/gtkmenufactory.h \ /usr/include/gtk/gtklayout.h /usr/include/gtk/gtklist.h \ /usr/include/gtk/gtklistitem.h /usr/include/gtk/gtkmenu.h \ /usr/include/gtk/gtkmenushell.h /usr/include/gtk/gtkmenubar.h \ /usr/include/gtk/gtkoptionmenu.h /usr/include/gtk/gtkpacker.h \ /usr/include/gtk/gtkpixmap.h /usr/include/gtk/gtkplug.h \ /usr/include/gtk/gtkprogress.h /usr/include/gtk/gtkprogressbar.h \ /usr/include/gtk/gtkradiobutton.h /usr/include/gtk/gtkradiomenuitem.h \ /usr/include/gtk/gtkrc.h /usr/include/gtk/gtkscrolledwindow.h \ /usr/include/gtk/gtkviewport.h /usr/include/gtk/gtksocket.h \ /usr/include/gtk/gtkspinbutton.h /usr/include/gtk/gtkstatusbar.h \ /usr/include/gtk/gtktearoffmenuitem.h /usr/include/gtk/gtktext.h \ /usr/include/gtk/gtkthemes.h /usr/include/gtk/gtktipsquery.h \ /usr/include/gtk/gtktoolbar.h /usr/include/gtk/gtktooltips.h \ /usr/include/gtk/gtktree.h /usr/include/gtk/gtktreeitem.h \ /usr/include/gtk/gtkvbbox.h /usr/include/gtk/gtkvpaned.h \ /usr/include/gtk/gtkvruler.h /usr/include/gtk/gtkvscale.h \ /usr/include/gtk/gtkvseparator.h /usr/include/pthread.h \ /usr/include/sched.h /usr/include/signal.h /usr/include/bits/initspin.h \ /usr/include/bits/sigthread.h /usr/local/include/xmms/plugin.h \ /usr/include/alloca.h configure.c : bte.h : /usr/include/stdio.h : /usr/include/features.h : /usr/include/sys/cdefs.h : /usr/include/gnu/stubs.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h : /usr/include/bits/types.h : /usr/include/bits/pthreadtypes.h : /usr/include/bits/sched.h : /usr/include/libio.h : /usr/include/_G_config.h : /usr/include/wchar.h : /usr/include/bits/wchar.h : /usr/include/gconv.h : /usr/include/bits/stdio_lim.h : /usr/include/bits/stdio.h : /usr/include/string.h : /usr/include/bits/string.h : /usr/include/bits/string2.h : /usr/include/endian.h : /usr/include/bits/endian.h : /usr/include/stdlib.h : /usr/include/ctype.h : /usr/include/math.h : /usr/include/bits/huge_val.h : /usr/include/bits/mathdef.h : /usr/include/bits/mathcalls.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/float.h : /usr/include/bits/mathinline.h : /usr/include/unistd.h : /usr/include/bits/posix_opt.h : /usr/include/bits/confname.h : /usr/include/getopt.h : /usr/include/fcntl.h : /usr/include/bits/fcntl.h : /usr/include/sys/types.h : /usr/include/time.h : /usr/include/sys/select.h : /usr/include/bits/select.h : /usr/include/bits/sigset.h : /usr/include/sys/sysmacros.h : /usr/include/termios.h : /usr/include/bits/termios.h : /usr/include/sys/ttydefaults.h : /usr/include/sys/time.h : /usr/include/bits/time.h : /usr/include/errno.h : /usr/include/bits/errno.h : /usr/include/linux/errno.h : /usr/include/asm/errno.h : /usr/include/glib.h : /usr/lib/glib/include/glibconfig.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/limits.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/syslimits.h : /usr/include/limits.h : /usr/include/bits/posix1_lim.h : /usr/include/bits/local_lim.h : /usr/include/linux/limits.h : /usr/include/bits/posix2_lim.h : /usr/include/gtk/gtk.h : /usr/include/gdk/gdk.h : /usr/include/gdk/gdktypes.h : /usr/include/gdk/gdkcursors.h : /usr/include/gdk/gdkrgb.h : /usr/include/gtk/gtkaccelgroup.h : /usr/include/gtk/gtkobject.h : /usr/include/gtk/gtkarg.h : /usr/include/gtk/gtktypeutils.h : /usr/include/gtk/gtktypebuiltins.h : /usr/include/gtk/gtkenums.h : /usr/include/gtk/gtkdebug.h : /usr/include/gtk/gtkaccellabel.h : /usr/include/gtk/gtklabel.h : /usr/include/gtk/gtkmisc.h : /usr/include/gtk/gtkwidget.h : /usr/include/gtk/gtkadjustment.h : /usr/include/gtk/gtkdata.h : /usr/include/gtk/gtkstyle.h : /usr/include/gtk/gtkalignment.h : /usr/include/gtk/gtkbin.h : /usr/include/gtk/gtkcontainer.h : /usr/include/gtk/gtkaspectframe.h : /usr/include/gtk/gtkframe.h : /usr/include/gtk/gtkarrow.h : /usr/include/gtk/gtkbindings.h : /usr/include/gtk/gtkbox.h : /usr/include/gtk/gtkbbox.h : /usr/include/gtk/gtkbutton.h : /usr/include/gtk/gtkcalendar.h : /usr/include/gtk/gtksignal.h : /usr/include/gtk/gtkmarshal.h : /usr/include/gtk/gtkcheckbutton.h : /usr/include/gtk/gtktogglebutton.h : /usr/include/gtk/gtkcheckmenuitem.h : /usr/include/gtk/gtkmenuitem.h : /usr/include/gtk/gtkitem.h : /usr/include/gtk/gtkclist.h : /usr/include/gtk/gtkhscrollbar.h : /usr/include/gtk/gtkscrollbar.h : /usr/include/gtk/gtkrange.h : /usr/include/gtk/gtkvscrollbar.h : /usr/include/gtk/gtkcolorsel.h : /usr/include/gtk/gtkwindow.h : /usr/include/gtk/gtkvbox.h : /usr/include/gtk/gtkpreview.h : /usr/include/gtk/gtkentry.h : /usr/include/gtk/gtkeditable.h : /usr/include/gtk/gtkhbox.h : /usr/include/gtk/gtkmain.h : /usr/include/gtk/gtkscale.h : /usr/include/gtk/gtkhscale.h : /usr/include/gtk/gtktable.h : /usr/include/gtk/gtkeventbox.h : /usr/include/gtk/gtkcombo.h : /usr/include/gtk/gtkcompat.h : /usr/include/gtk/gtkctree.h : /usr/include/gtk/gtkcurve.h : /usr/include/gtk/gtkdrawingarea.h : /usr/include/gtk/gtkdialog.h : /usr/include/gtk/gtkdnd.h : /usr/include/gtk/gtkselection.h : /usr/include/gtk/gtkfeatures.h : /usr/include/gtk/gtkfilesel.h : /usr/include/gtk/gtkfixed.h : /usr/include/gtk/gtkfontsel.h : /usr/include/gtk/gtknotebook.h : /usr/include/gtk/gtkgamma.h : /usr/include/gtk/gtkgc.h : /usr/include/gtk/gtkhandlebox.h : /usr/include/gtk/gtkhbbox.h : /usr/include/gtk/gtkhpaned.h : /usr/include/gtk/gtkpaned.h : /usr/include/gtk/gtkhruler.h : /usr/include/gtk/gtkruler.h : /usr/include/gtk/gtkhseparator.h : /usr/include/gtk/gtkseparator.h : /usr/include/gtk/gtkimage.h : /usr/include/gtk/gtkinputdialog.h : /usr/include/gtk/gtkitemfactory.h : /usr/include/gtk/gtkmenufactory.h : /usr/include/gtk/gtklayout.h : /usr/include/gtk/gtklist.h : /usr/include/gtk/gtklistitem.h : /usr/include/gtk/gtkmenu.h : /usr/include/gtk/gtkmenushell.h : /usr/include/gtk/gtkmenubar.h : /usr/include/gtk/gtkoptionmenu.h : /usr/include/gtk/gtkpacker.h : /usr/include/gtk/gtkpixmap.h : /usr/include/gtk/gtkplug.h : /usr/include/gtk/gtkprogress.h : /usr/include/gtk/gtkprogressbar.h : /usr/include/gtk/gtkradiobutton.h : /usr/include/gtk/gtkradiomenuitem.h : /usr/include/gtk/gtkrc.h : /usr/include/gtk/gtkscrolledwindow.h : /usr/include/gtk/gtkviewport.h : /usr/include/gtk/gtksocket.h : /usr/include/gtk/gtkspinbutton.h : /usr/include/gtk/gtkstatusbar.h : /usr/include/gtk/gtktearoffmenuitem.h : /usr/include/gtk/gtktext.h : /usr/include/gtk/gtkthemes.h : /usr/include/gtk/gtktipsquery.h : /usr/include/gtk/gtktoolbar.h : /usr/include/gtk/gtktooltips.h : /usr/include/gtk/gtktree.h : /usr/include/gtk/gtktreeitem.h : /usr/include/gtk/gtkvbbox.h : /usr/include/gtk/gtkvpaned.h : /usr/include/gtk/gtkvruler.h : /usr/include/gtk/gtkvscale.h : /usr/include/gtk/gtkvseparator.h : /usr/include/pthread.h : /usr/include/sched.h : /usr/include/signal.h : /usr/include/bits/initspin.h : /usr/include/bits/sigthread.h : /usr/local/include/xmms/plugin.h : /usr/include/alloca.h : btexmms/src/.deps/btio.P0100664000076400007640000002660307543650045014103 0ustar nikenikebtio.lo btio.o : btio.c btio.h bte.h /usr/include/stdio.h /usr/include/features.h \ /usr/include/sys/cdefs.h /usr/include/gnu/stubs.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h \ /usr/include/bits/types.h /usr/include/bits/pthreadtypes.h \ /usr/include/bits/sched.h /usr/include/libio.h /usr/include/_G_config.h \ /usr/include/wchar.h /usr/include/bits/wchar.h /usr/include/gconv.h \ /usr/include/bits/stdio_lim.h /usr/include/bits/stdio.h \ /usr/include/string.h /usr/include/bits/string.h \ /usr/include/bits/string2.h /usr/include/endian.h \ /usr/include/bits/endian.h /usr/include/stdlib.h /usr/include/ctype.h \ /usr/include/math.h /usr/include/bits/huge_val.h \ /usr/include/bits/mathdef.h /usr/include/bits/mathcalls.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/float.h \ /usr/include/bits/mathinline.h /usr/include/unistd.h \ /usr/include/bits/posix_opt.h /usr/include/bits/confname.h \ /usr/include/getopt.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \ /usr/include/sys/types.h /usr/include/time.h /usr/include/sys/select.h \ /usr/include/bits/select.h /usr/include/bits/sigset.h \ /usr/include/sys/sysmacros.h /usr/include/termios.h \ /usr/include/bits/termios.h /usr/include/sys/ttydefaults.h \ /usr/include/sys/time.h /usr/include/bits/time.h /usr/include/errno.h \ /usr/include/bits/errno.h /usr/include/linux/errno.h \ /usr/include/asm/errno.h /usr/include/glib.h \ /usr/lib/glib/include/glibconfig.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/limits.h \ /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/syslimits.h \ /usr/include/limits.h /usr/include/bits/posix1_lim.h \ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \ /usr/include/bits/posix2_lim.h /usr/include/gtk/gtk.h \ /usr/include/gdk/gdk.h /usr/include/gdk/gdktypes.h \ /usr/include/gdk/gdkcursors.h /usr/include/gdk/gdkrgb.h \ /usr/include/gtk/gtkaccelgroup.h /usr/include/gtk/gtkobject.h \ /usr/include/gtk/gtkarg.h /usr/include/gtk/gtktypeutils.h \ /usr/include/gtk/gtktypebuiltins.h /usr/include/gtk/gtkenums.h \ /usr/include/gtk/gtkdebug.h /usr/include/gtk/gtkaccellabel.h \ /usr/include/gtk/gtklabel.h /usr/include/gtk/gtkmisc.h \ /usr/include/gtk/gtkwidget.h /usr/include/gtk/gtkadjustment.h \ /usr/include/gtk/gtkdata.h /usr/include/gtk/gtkstyle.h \ /usr/include/gtk/gtkalignment.h /usr/include/gtk/gtkbin.h \ /usr/include/gtk/gtkcontainer.h /usr/include/gtk/gtkaspectframe.h \ /usr/include/gtk/gtkframe.h /usr/include/gtk/gtkarrow.h \ /usr/include/gtk/gtkbindings.h /usr/include/gtk/gtkbox.h \ /usr/include/gtk/gtkbbox.h /usr/include/gtk/gtkbutton.h \ /usr/include/gtk/gtkcalendar.h /usr/include/gtk/gtksignal.h \ /usr/include/gtk/gtkmarshal.h /usr/include/gtk/gtkcheckbutton.h \ /usr/include/gtk/gtktogglebutton.h /usr/include/gtk/gtkcheckmenuitem.h \ /usr/include/gtk/gtkmenuitem.h /usr/include/gtk/gtkitem.h \ /usr/include/gtk/gtkclist.h /usr/include/gtk/gtkhscrollbar.h \ /usr/include/gtk/gtkscrollbar.h /usr/include/gtk/gtkrange.h \ /usr/include/gtk/gtkvscrollbar.h /usr/include/gtk/gtkcolorsel.h \ /usr/include/gtk/gtkwindow.h /usr/include/gtk/gtkvbox.h \ /usr/include/gtk/gtkpreview.h /usr/include/gtk/gtkentry.h \ /usr/include/gtk/gtkeditable.h /usr/include/gtk/gtkhbox.h \ /usr/include/gtk/gtkmain.h /usr/include/gtk/gtkscale.h \ /usr/include/gtk/gtkhscale.h /usr/include/gtk/gtktable.h \ /usr/include/gtk/gtkeventbox.h /usr/include/gtk/gtkcombo.h \ /usr/include/gtk/gtkcompat.h /usr/include/gtk/gtkctree.h \ /usr/include/gtk/gtkcurve.h /usr/include/gtk/gtkdrawingarea.h \ /usr/include/gtk/gtkdialog.h /usr/include/gtk/gtkdnd.h \ /usr/include/gtk/gtkselection.h /usr/include/gtk/gtkfeatures.h \ /usr/include/gtk/gtkfilesel.h /usr/include/gtk/gtkfixed.h \ /usr/include/gtk/gtkfontsel.h /usr/include/gtk/gtknotebook.h \ /usr/include/gtk/gtkgamma.h /usr/include/gtk/gtkgc.h \ /usr/include/gtk/gtkhandlebox.h /usr/include/gtk/gtkhbbox.h \ /usr/include/gtk/gtkhpaned.h /usr/include/gtk/gtkpaned.h \ /usr/include/gtk/gtkhruler.h /usr/include/gtk/gtkruler.h \ /usr/include/gtk/gtkhseparator.h /usr/include/gtk/gtkseparator.h \ /usr/include/gtk/gtkimage.h /usr/include/gtk/gtkinputdialog.h \ /usr/include/gtk/gtkitemfactory.h /usr/include/gtk/gtkmenufactory.h \ /usr/include/gtk/gtklayout.h /usr/include/gtk/gtklist.h \ /usr/include/gtk/gtklistitem.h /usr/include/gtk/gtkmenu.h \ /usr/include/gtk/gtkmenushell.h /usr/include/gtk/gtkmenubar.h \ /usr/include/gtk/gtkoptionmenu.h /usr/include/gtk/gtkpacker.h \ /usr/include/gtk/gtkpixmap.h /usr/include/gtk/gtkplug.h \ /usr/include/gtk/gtkprogress.h /usr/include/gtk/gtkprogressbar.h \ /usr/include/gtk/gtkradiobutton.h /usr/include/gtk/gtkradiomenuitem.h \ /usr/include/gtk/gtkrc.h /usr/include/gtk/gtkscrolledwindow.h \ /usr/include/gtk/gtkviewport.h /usr/include/gtk/gtksocket.h \ /usr/include/gtk/gtkspinbutton.h /usr/include/gtk/gtkstatusbar.h \ /usr/include/gtk/gtktearoffmenuitem.h /usr/include/gtk/gtktext.h \ /usr/include/gtk/gtkthemes.h /usr/include/gtk/gtktipsquery.h \ /usr/include/gtk/gtktoolbar.h /usr/include/gtk/gtktooltips.h \ /usr/include/gtk/gtktree.h /usr/include/gtk/gtktreeitem.h \ /usr/include/gtk/gtkvbbox.h /usr/include/gtk/gtkvpaned.h \ /usr/include/gtk/gtkvruler.h /usr/include/gtk/gtkvscale.h \ /usr/include/gtk/gtkvseparator.h /usr/include/pthread.h \ /usr/include/sched.h /usr/include/signal.h /usr/include/bits/initspin.h \ /usr/include/bits/sigthread.h /usr/local/include/xmms/plugin.h \ /usr/include/sys/stat.h /usr/include/bits/stat.h \ /usr/include/sys/ioctl.h /usr/include/bits/ioctls.h \ /usr/include/asm/ioctls.h /usr/include/asm/ioctl.h \ /usr/include/bits/ioctl-types.h btio.c : btio.h : bte.h : /usr/include/stdio.h : /usr/include/features.h : /usr/include/sys/cdefs.h : /usr/include/gnu/stubs.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stddef.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/stdarg.h : /usr/include/bits/types.h : /usr/include/bits/pthreadtypes.h : /usr/include/bits/sched.h : /usr/include/libio.h : /usr/include/_G_config.h : /usr/include/wchar.h : /usr/include/bits/wchar.h : /usr/include/gconv.h : /usr/include/bits/stdio_lim.h : /usr/include/bits/stdio.h : /usr/include/string.h : /usr/include/bits/string.h : /usr/include/bits/string2.h : /usr/include/endian.h : /usr/include/bits/endian.h : /usr/include/stdlib.h : /usr/include/ctype.h : /usr/include/math.h : /usr/include/bits/huge_val.h : /usr/include/bits/mathdef.h : /usr/include/bits/mathcalls.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/float.h : /usr/include/bits/mathinline.h : /usr/include/unistd.h : /usr/include/bits/posix_opt.h : /usr/include/bits/confname.h : /usr/include/getopt.h : /usr/include/fcntl.h : /usr/include/bits/fcntl.h : /usr/include/sys/types.h : /usr/include/time.h : /usr/include/sys/select.h : /usr/include/bits/select.h : /usr/include/bits/sigset.h : /usr/include/sys/sysmacros.h : /usr/include/termios.h : /usr/include/bits/termios.h : /usr/include/sys/ttydefaults.h : /usr/include/sys/time.h : /usr/include/bits/time.h : /usr/include/errno.h : /usr/include/bits/errno.h : /usr/include/linux/errno.h : /usr/include/asm/errno.h : /usr/include/glib.h : /usr/lib/glib/include/glibconfig.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/limits.h : /usr/lib/gcc-lib/i386-redhat-linux/2.96/include/syslimits.h : /usr/include/limits.h : /usr/include/bits/posix1_lim.h : /usr/include/bits/local_lim.h : /usr/include/linux/limits.h : /usr/include/bits/posix2_lim.h : /usr/include/gtk/gtk.h : /usr/include/gdk/gdk.h : /usr/include/gdk/gdktypes.h : /usr/include/gdk/gdkcursors.h : /usr/include/gdk/gdkrgb.h : /usr/include/gtk/gtkaccelgroup.h : /usr/include/gtk/gtkobject.h : /usr/include/gtk/gtkarg.h : /usr/include/gtk/gtktypeutils.h : /usr/include/gtk/gtktypebuiltins.h : /usr/include/gtk/gtkenums.h : /usr/include/gtk/gtkdebug.h : /usr/include/gtk/gtkaccellabel.h : /usr/include/gtk/gtklabel.h : /usr/include/gtk/gtkmisc.h : /usr/include/gtk/gtkwidget.h : /usr/include/gtk/gtkadjustment.h : /usr/include/gtk/gtkdata.h : /usr/include/gtk/gtkstyle.h : /usr/include/gtk/gtkalignment.h : /usr/include/gtk/gtkbin.h : /usr/include/gtk/gtkcontainer.h : /usr/include/gtk/gtkaspectframe.h : /usr/include/gtk/gtkframe.h : /usr/include/gtk/gtkarrow.h : /usr/include/gtk/gtkbindings.h : /usr/include/gtk/gtkbox.h : /usr/include/gtk/gtkbbox.h : /usr/include/gtk/gtkbutton.h : /usr/include/gtk/gtkcalendar.h : /usr/include/gtk/gtksignal.h : /usr/include/gtk/gtkmarshal.h : /usr/include/gtk/gtkcheckbutton.h : /usr/include/gtk/gtktogglebutton.h : /usr/include/gtk/gtkcheckmenuitem.h : /usr/include/gtk/gtkmenuitem.h : /usr/include/gtk/gtkitem.h : /usr/include/gtk/gtkclist.h : /usr/include/gtk/gtkhscrollbar.h : /usr/include/gtk/gtkscrollbar.h : /usr/include/gtk/gtkrange.h : /usr/include/gtk/gtkvscrollbar.h : /usr/include/gtk/gtkcolorsel.h : /usr/include/gtk/gtkwindow.h : /usr/include/gtk/gtkvbox.h : /usr/include/gtk/gtkpreview.h : /usr/include/gtk/gtkentry.h : /usr/include/gtk/gtkeditable.h : /usr/include/gtk/gtkhbox.h : /usr/include/gtk/gtkmain.h : /usr/include/gtk/gtkscale.h : /usr/include/gtk/gtkhscale.h : /usr/include/gtk/gtktable.h : /usr/include/gtk/gtkeventbox.h : /usr/include/gtk/gtkcombo.h : /usr/include/gtk/gtkcompat.h : /usr/include/gtk/gtkctree.h : /usr/include/gtk/gtkcurve.h : /usr/include/gtk/gtkdrawingarea.h : /usr/include/gtk/gtkdialog.h : /usr/include/gtk/gtkdnd.h : /usr/include/gtk/gtkselection.h : /usr/include/gtk/gtkfeatures.h : /usr/include/gtk/gtkfilesel.h : /usr/include/gtk/gtkfixed.h : /usr/include/gtk/gtkfontsel.h : /usr/include/gtk/gtknotebook.h : /usr/include/gtk/gtkgamma.h : /usr/include/gtk/gtkgc.h : /usr/include/gtk/gtkhandlebox.h : /usr/include/gtk/gtkhbbox.h : /usr/include/gtk/gtkhpaned.h : /usr/include/gtk/gtkpaned.h : /usr/include/gtk/gtkhruler.h : /usr/include/gtk/gtkruler.h : /usr/include/gtk/gtkhseparator.h : /usr/include/gtk/gtkseparator.h : /usr/include/gtk/gtkimage.h : /usr/include/gtk/gtkinputdialog.h : /usr/include/gtk/gtkitemfactory.h : /usr/include/gtk/gtkmenufactory.h : /usr/include/gtk/gtklayout.h : /usr/include/gtk/gtklist.h : /usr/include/gtk/gtklistitem.h : /usr/include/gtk/gtkmenu.h : /usr/include/gtk/gtkmenushell.h : /usr/include/gtk/gtkmenubar.h : /usr/include/gtk/gtkoptionmenu.h : /usr/include/gtk/gtkpacker.h : /usr/include/gtk/gtkpixmap.h : /usr/include/gtk/gtkplug.h : /usr/include/gtk/gtkprogress.h : /usr/include/gtk/gtkprogressbar.h : /usr/include/gtk/gtkradiobutton.h : /usr/include/gtk/gtkradiomenuitem.h : /usr/include/gtk/gtkrc.h : /usr/include/gtk/gtkscrolledwindow.h : /usr/include/gtk/gtkviewport.h : /usr/include/gtk/gtksocket.h : /usr/include/gtk/gtkspinbutton.h : /usr/include/gtk/gtkstatusbar.h : /usr/include/gtk/gtktearoffmenuitem.h : /usr/include/gtk/gtktext.h : /usr/include/gtk/gtkthemes.h : /usr/include/gtk/gtktipsquery.h : /usr/include/gtk/gtktoolbar.h : /usr/include/gtk/gtktooltips.h : /usr/include/gtk/gtktree.h : /usr/include/gtk/gtktreeitem.h : /usr/include/gtk/gtkvbbox.h : /usr/include/gtk/gtkvpaned.h : /usr/include/gtk/gtkvruler.h : /usr/include/gtk/gtkvscale.h : /usr/include/gtk/gtkvseparator.h : /usr/include/pthread.h : /usr/include/sched.h : /usr/include/signal.h : /usr/include/bits/initspin.h : /usr/include/bits/sigthread.h : /usr/local/include/xmms/plugin.h : /usr/include/sys/stat.h : /usr/include/bits/stat.h : /usr/include/sys/ioctl.h : /usr/include/bits/ioctls.h : /usr/include/asm/ioctls.h : /usr/include/asm/ioctl.h : /usr/include/bits/ioctl-types.h : btexmms/src/configure.c0100664000076400007640000003703207543212511014127 0ustar nikenike/* * XMMS is Copyright (C) 1998-2000 Peter Alm, Mikael Alm, Olle Hallnas, Thomas Nilsson and 4Front Technologies * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "bte.h" #include #define BTE_MAX_BAUD_RATE 115200 static gboolean keepConfGoing; gboolean bteconf_is_going = FALSE; static GtkWidget *bteconf_mainwin = NULL, *bteconf_controlwin, *bteconf_playlistwin; static GtkWidget *dev_entry, *btecode_entry, *playlist_entry, *playlist_spin; static GtkWidget *baudrate_entry; static gchar *bte_control[13] = { N_("Play"), N_("Stop"), N_("Pause"), N_("Prev"), N_("Next"), N_("Vol +"), N_("Seek -5s"), N_("Seek +5s"), N_("Vol -"), N_("Shuffle"), N_("Repeat"), N_("Playlist"), N_("+100") }; static gchar *bte_playlist[10] = { N_("0"), N_("1"), N_("2"), N_("3"), N_("4"), N_("5"), N_("6"), N_("7"), N_("8"), N_("9") }; static gchar *irbutton_to_edit; static gint bte_was_enabled; static void bteconf_ok_cb(GtkWidget * w, gpointer data) { btecfg.device = g_strdup(gtk_entry_get_text(GTK_ENTRY(dev_entry))); btecfg.baudrate = atoi(gtk_entry_get_text(GTK_ENTRY(baudrate_entry))); if(btecfg.baudrate > BTE_MAX_BAUD_RATE) btecfg.baudrate = BTE_MAX_BAUD_RATE; if(btecfg.baudrate < 0) btecfg.baudrate = 9600; /* Re-initialize remote using new settings */ bte_close_port(); bte_open_port(btecfg.device); bte_save_config(); gtk_widget_destroy(bteconf_mainwin); } static void bteconf_cancel_cb(GtkWidget * w, gpointer data) { bte_read_config(); gtk_widget_destroy(bteconf_mainwin); } static gint bteconf_codeentry_routine(gpointer data) { char *keycode; keycode = bte_poll_key(); if (keycode) { gtk_entry_set_text(GTK_ENTRY(btecode_entry), keycode); } if (keepConfGoing) return TRUE; else return FALSE; } static void bteconf_control_ok_cb(GtkWidget * w, gpointer data) { gint i; keepConfGoing = FALSE; bte_close_port(); if (bte_was_enabled) bte_open_port(btecfg.device); bteconf_is_going = FALSE; if (!strcmp(irbutton_to_edit, bte_control[0])) btecfg.button_play = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[1])) btecfg.button_stop = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[2])) btecfg.button_pause = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[3])) btecfg.button_prev = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[4])) btecfg.button_next = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[5])) btecfg.button_volup = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[6])) btecfg.button_seekb = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[7])) btecfg.button_seekf = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[8])) btecfg.button_voldown = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[9])) btecfg.button_shuffle = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[10])) btecfg.button_repeat = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[11])) btecfg.button_playlist = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else if (!strcmp(irbutton_to_edit, bte_control[12])) btecfg.button_plus100 = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); else for (i = 0; i < 10; i++) if (!strcmp(irbutton_to_edit, bte_playlist[i])) btecfg.button[i] = g_strdup(gtk_entry_get_text(GTK_ENTRY(btecode_entry))); gtk_widget_destroy(bteconf_controlwin); } static void bteconf_control_cancel_cb(GtkWidget * w, gpointer data) { keepConfGoing = FALSE; bte_close_port(); if (bte_was_enabled) bte_open_port(btecfg.device); bteconf_is_going = FALSE; gtk_widget_destroy(bteconf_controlwin); } static void bteconf_control_cb(GtkWidget * w, gchar * data) { GtkWidget *vbox, *frame, *table, *button, *box; gint i; if (!bteconf_controlwin && !bteconf_playlistwin) { char *tmp; keepConfGoing = TRUE; irbutton_to_edit = data; bteconf_controlwin = gtk_window_new(GTK_WINDOW_DIALOG); gtk_signal_connect(GTK_OBJECT(bteconf_controlwin), "destroy", GTK_SIGNAL_FUNC(gtk_widget_destroyed), &bteconf_controlwin); tmp=g_strdup_printf(_("`%s' Button Setup"),_(data)); gtk_window_set_title(GTK_WINDOW(bteconf_controlwin), tmp); g_free(tmp); gtk_window_set_policy(GTK_WINDOW(bteconf_controlwin), FALSE, FALSE, FALSE); gtk_window_set_position(GTK_WINDOW(bteconf_controlwin), GTK_WIN_POS_MOUSE); gtk_container_border_width(GTK_CONTAINER(bteconf_controlwin), 10); vbox = gtk_vbox_new(FALSE, 10); gtk_container_add(GTK_CONTAINER(bteconf_controlwin), vbox); frame = gtk_frame_new(_("Enter code or use remote")); gtk_container_border_width(GTK_CONTAINER(frame), 5); gtk_box_pack_start(GTK_BOX(vbox), frame, FALSE, FALSE, 0); table = gtk_table_new(1, 1, FALSE); gtk_container_set_border_width(GTK_CONTAINER(table), 5); gtk_container_add(GTK_CONTAINER(frame), table); gtk_table_set_row_spacings(GTK_TABLE(table), 2); gtk_table_set_col_spacings(GTK_TABLE(table), 5); btecode_entry = gtk_entry_new(); gtk_table_attach_defaults(GTK_TABLE(table), btecode_entry, 0, 1, 0, 1); if (!strcmp(data, bte_control[0])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_play); else if (!strcmp(data, bte_control[1])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_stop); else if (!strcmp(data, bte_control[2])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_pause); else if (!strcmp(data, bte_control[3])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_prev); else if (!strcmp(data, bte_control[4])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_next); else if (!strcmp(data, bte_control[5])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_volup); else if (!strcmp(data, bte_control[6])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_seekb); else if (!strcmp(data, bte_control[7])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_seekf); else if (!strcmp(data, bte_control[8])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_voldown); else if (!strcmp(data, bte_control[9])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_shuffle); else if (!strcmp(data, bte_control[10])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_repeat); else if (!strcmp(data, bte_control[11])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_playlist); else if (!strcmp(data, bte_control[12])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button_plus100); else for (i = 0; i < 10; i++) if (!strcmp(data, bte_playlist[i])) gtk_entry_set_text(GTK_ENTRY(btecode_entry), btecfg.button[i]); gtk_widget_show(btecode_entry); box = gtk_hbutton_box_new(); gtk_button_box_set_layout(GTK_BUTTON_BOX(box), GTK_BUTTONBOX_END); gtk_button_box_set_spacing(GTK_BUTTON_BOX(box), 5); gtk_box_pack_start(GTK_BOX(vbox), box, FALSE, FALSE, 0); button = gtk_button_new_with_label(_("Ok")); gtk_signal_connect_object(GTK_OBJECT(button), "clicked", GTK_SIGNAL_FUNC(bteconf_control_ok_cb), NULL); GTK_WIDGET_SET_FLAGS(button, GTK_CAN_DEFAULT); gtk_box_pack_start(GTK_BOX(box), button, TRUE, TRUE, 0); gtk_widget_grab_default(button); gtk_widget_show(button); button = gtk_button_new_with_label(_("Cancel")); gtk_signal_connect_object(GTK_OBJECT(button), "clicked", GTK_SIGNAL_FUNC(bteconf_control_cancel_cb), NULL); GTK_WIDGET_SET_FLAGS(button, GTK_CAN_DEFAULT); gtk_box_pack_start(GTK_BOX(box), button, TRUE, TRUE, 0); gtk_widget_show(button); gtk_widget_show(box); gtk_widget_show(table); gtk_widget_show(frame); gtk_widget_show(vbox); gtk_widget_show(bteconf_controlwin); if ((bte_was_enabled = bte_get_portfd())) bte_close_port(); bte_open_port(g_strdup(gtk_entry_get_text(GTK_ENTRY(dev_entry)))); bteconf_is_going = TRUE; gtk_timeout_add(10, bteconf_codeentry_routine, NULL); } } static void spin_change_cb(GtkWidget * widget, GtkSpinButton * spin) { gtk_entry_set_text(GTK_ENTRY(playlist_entry), btecfg.playlist[gtk_spin_button_get_value_as_int(spin)]); } static void pl_entry_change_cb(GtkWidget * widget, GtkSpinButton * spin) { btecfg.playlist[gtk_spin_button_get_value_as_int(spin)] = g_strdup(gtk_entry_get_text(GTK_ENTRY(playlist_entry))); } void bte_configure() { GtkWidget *vbox, *notebook, *box, *frame, *table, *vbox2, *label, *button, *label_baudrate; GtkAdjustment *adj; gint i; bte_read_config(); if (!bteconf_mainwin) { bteconf_mainwin = gtk_window_new(GTK_WINDOW_DIALOG); gtk_signal_connect(GTK_OBJECT(bteconf_mainwin), "destroy", GTK_SIGNAL_FUNC(gtk_widget_destroyed), &bteconf_mainwin); gtk_window_set_title(GTK_WINDOW(bteconf_mainwin), _("XMMS BTE Configuration")); gtk_window_set_policy(GTK_WINDOW(bteconf_mainwin), FALSE, FALSE, FALSE); gtk_window_set_position(GTK_WINDOW(bteconf_mainwin), GTK_WIN_POS_MOUSE); gtk_container_border_width(GTK_CONTAINER(bteconf_mainwin), 10); vbox = gtk_vbox_new(FALSE, 10); gtk_container_add(GTK_CONTAINER(bteconf_mainwin), vbox); notebook = gtk_notebook_new(); gtk_box_pack_start(GTK_BOX(vbox), notebook, TRUE, TRUE, 0); box = gtk_vbox_new(FALSE, 5); gtk_container_set_border_width(GTK_CONTAINER(box), 5); frame = gtk_frame_new(_("Device:")); gtk_box_pack_start(GTK_BOX(box), frame, FALSE, FALSE, 0); table = gtk_table_new(2, 1, FALSE); gtk_container_set_border_width(GTK_CONTAINER(table), 5); gtk_container_add(GTK_CONTAINER(frame), table); gtk_table_set_row_spacings(GTK_TABLE(table), 5); gtk_table_set_col_spacings(GTK_TABLE(table), 5); label = gtk_label_new(_("Device: ")); gtk_misc_set_alignment(GTK_MISC(label), 1.0, 0.5); gtk_table_attach_defaults(GTK_TABLE(table), label, 0, 1, 0, 1); gtk_widget_show(label); dev_entry = gtk_entry_new(); gtk_entry_set_text(GTK_ENTRY(dev_entry), btecfg.device); gtk_table_attach_defaults(GTK_TABLE(table), dev_entry, 1, 2, 0, 1); gtk_widget_show(dev_entry); label_baudrate = gtk_label_new(_("Seral port speed: ")); gtk_misc_set_alignment(GTK_MISC(label_baudrate), 1.0, 0.5); gtk_table_attach_defaults(GTK_TABLE(table), label_baudrate, 0, 1, 1, 2); gtk_widget_show(label_baudrate); baudrate_entry = gtk_entry_new(); gtk_entry_set_text(GTK_ENTRY(baudrate_entry), g_strdup_printf("%d", btecfg.baudrate)); gtk_table_attach_defaults(GTK_TABLE(table), baudrate_entry, 1, 2, 1, 2); gtk_widget_show(baudrate_entry); gtk_widget_show(table); gtk_widget_show(frame); frame = gtk_frame_new(_("Controls:")); gtk_box_pack_start(GTK_BOX(box), frame, FALSE, FALSE, 0); vbox2 = gtk_vbox_new(FALSE, 0); // gtk_container_set_border_width(GTK_CONTAINER(vbox2),0); gtk_container_add(GTK_CONTAINER(frame), vbox2); table = gtk_table_new(5, 3, TRUE); gtk_container_set_border_width(GTK_CONTAINER(table), 5); gtk_table_set_row_spacings(GTK_TABLE(table), 5); gtk_table_set_col_spacings(GTK_TABLE(table), 5); gtk_box_pack_start(GTK_BOX(vbox2), table, FALSE, FALSE, 0); for (i = 0; i < 13; i++) { button = gtk_button_new_with_label(_(bte_control[i])); gtk_signal_connect(GTK_OBJECT(button), "clicked", GTK_SIGNAL_FUNC(bteconf_control_cb), bte_control[i]); gtk_table_attach_defaults(GTK_TABLE(table), button, i % 3, (i % 3) + 1, i / 3, (i / 3) + 1); gtk_widget_show(button); } gtk_widget_show(table); gtk_widget_show(frame); table = gtk_table_new(2, 5, FALSE); gtk_container_set_border_width(GTK_CONTAINER(table), 5); gtk_table_set_row_spacings(GTK_TABLE(table), 0); gtk_table_set_col_spacings(GTK_TABLE(table), 0); gtk_box_pack_start(GTK_BOX(vbox2), table, FALSE, FALSE, 0); for (i = 0; i < 10; i++) { button = gtk_button_new_with_label(_(bte_playlist[i])); gtk_signal_connect(GTK_OBJECT(button), "clicked", GTK_SIGNAL_FUNC(bteconf_control_cb), bte_playlist[i]); gtk_table_attach_defaults(GTK_TABLE(table), button, i % 5, (i % 5) + 1, i / 5, (i / 5) + 1); gtk_widget_show(button); } gtk_widget_show(table); gtk_widget_show(frame); frame = gtk_frame_new(_("Playlists:")); gtk_box_pack_start(GTK_BOX(box), frame, FALSE, FALSE, 0); table = gtk_table_new(2, 1, FALSE); gtk_container_set_border_width(GTK_CONTAINER(table), 5); gtk_container_add(GTK_CONTAINER(frame), table); gtk_table_set_row_spacings(GTK_TABLE(table), 5); gtk_table_set_col_spacings(GTK_TABLE(table), 5); adj = (GtkAdjustment *) gtk_adjustment_new(0, 0, 99, 1, 5, 0); playlist_spin = gtk_spin_button_new(adj, 0, 0); gtk_spin_button_set_numeric(GTK_SPIN_BUTTON(playlist_spin), TRUE); gtk_spin_button_set_update_policy(GTK_SPIN_BUTTON(playlist_spin), GTK_UPDATE_IF_VALID); gtk_spin_button_set_wrap(GTK_SPIN_BUTTON(playlist_spin), FALSE); gtk_table_attach_defaults(GTK_TABLE(table), playlist_spin, 0, 1, 0, 1); gtk_signal_connect(GTK_OBJECT(adj), "value_changed", GTK_SIGNAL_FUNC(spin_change_cb), (gpointer) playlist_spin); gtk_widget_show(playlist_spin); playlist_entry = gtk_entry_new(); gtk_entry_set_text(GTK_ENTRY(playlist_entry), btecfg.playlist[0]); gtk_signal_connect(GTK_OBJECT(playlist_entry), "changed", GTK_SIGNAL_FUNC(pl_entry_change_cb), (gpointer) playlist_spin); gtk_table_attach_defaults(GTK_TABLE(table), playlist_entry, 1, 2, 0, 1); gtk_widget_show(playlist_entry); gtk_widget_show(table); gtk_widget_show(frame); gtk_widget_show(vbox2); gtk_widget_show(box); gtk_notebook_append_page(GTK_NOTEBOOK(notebook), box, gtk_label_new(_("General"))); gtk_widget_show(notebook); box = gtk_hbutton_box_new(); gtk_button_box_set_layout(GTK_BUTTON_BOX(box), GTK_BUTTONBOX_END); gtk_button_box_set_spacing(GTK_BUTTON_BOX(box), 5); gtk_box_pack_start(GTK_BOX(vbox), box, FALSE, FALSE, 0); button = gtk_button_new_with_label(_("Ok")); gtk_signal_connect(GTK_OBJECT(button), "clicked", GTK_SIGNAL_FUNC(bteconf_ok_cb), NULL); GTK_WIDGET_SET_FLAGS(button, GTK_CAN_DEFAULT); gtk_box_pack_start(GTK_BOX(box), button, TRUE, TRUE, 0); gtk_widget_grab_default(button); gtk_widget_show(button); button = gtk_button_new_with_label(_("Cancel")); gtk_signal_connect(GTK_OBJECT(button), "clicked", GTK_SIGNAL_FUNC(bteconf_cancel_cb), NULL); GTK_WIDGET_SET_FLAGS(button, GTK_CAN_DEFAULT); gtk_box_pack_start(GTK_BOX(box), button, TRUE, TRUE, 0); gtk_widget_show(button); gtk_widget_show(box); gtk_widget_show(vbox); gtk_widget_show(bteconf_mainwin); } } btexmms/src/plugin.c0100664000076400007640000002703107543615603013453 0ustar nikenike#include "bte.h" #include #include #include #include "btio.h" #include #include static gboolean keepGoing = FALSE; static pthread_t bte_thread; static int key_pressed; static char last_key[10]; /* Config struct for device and buttons */ bteConfig btecfg; void bte_read_config(void); void bte_save_config(void); static void *xmms_bte_routine(void *arg); static void init(void); static void cleanup(void); static int create_menu(); GeneralPlugin bte_gp = { NULL, /* handle */ NULL, /* filename */ -1, /* xmms_session */ NULL, /* Description */ init, bte_about, bte_configure, cleanup }; GeneralPlugin *get_gplugin_info(void) { bte_gp.description = g_strdup_printf(_("BTE Control %s"), VERSION); return &bte_gp; } void bte_open_port(gchar * bt_port) { if (bt_open_port(bt_port) < 0) { perror("init port"); } } void bte_close_port(void) { if (bt_close_port() < 0) { perror("close port"); } } int bte_get_portfd(void) { return bt_getfd(); } static void init(void) { bte_read_config(); keepGoing = TRUE; pthread_create(&bte_thread, NULL, xmms_bte_routine, NULL); } static void cleanup(void) { keepGoing = FALSE; pthread_join(bte_thread, NULL); } void bte_read_config(void) { gint i; ConfigFile *cfgfile; gchar *filename, buttontext[20]; btecfg.device = g_strdup("/dev/ttyU0"); btecfg.baudrate = 115200; for (i = 0; i < 10; i++) { btecfg.button[i] = g_strdup(""); btecfg.playlist[i] = g_strdup(""); } for (i = 10; i < 100; i++) btecfg.playlist[i] = g_strdup(""); btecfg.button_play = g_strdup("^"); btecfg.button_stop = g_strdup("v"); btecfg.button_next = g_strdup(">"); btecfg.button_prev = g_strdup("<"); btecfg.button_pause = g_strdup("s"); btecfg.button_seekf = g_strdup(""); btecfg.button_seekb = g_strdup(""); btecfg.button_volup = g_strdup("0"); btecfg.button_voldown = g_strdup("*"); btecfg.button_shuffle = g_strdup(""); btecfg.button_repeat = g_strdup(""); btecfg.button_playlist = g_strdup(""); btecfg.button_plus100 = g_strdup(""); filename = g_strconcat(g_get_home_dir(), "/.xmms/config", NULL); cfgfile = xmms_cfg_open_file(filename); if (cfgfile) { xmms_cfg_read_string(cfgfile, "bte", "device", &btecfg.device); xmms_cfg_read_int(cfgfile, "bte", "baudrate", &btecfg.baudrate); for (i = 0; i < 10; i++) { sprintf(buttontext, "button%d", i); xmms_cfg_read_string(cfgfile, "bte", buttontext, &btecfg.button[i]); sprintf(buttontext, "playlist%d", i); xmms_cfg_read_string(cfgfile, "bte", buttontext, &btecfg.playlist[i]); } for (i = 10; i < 100; i++) { sprintf(buttontext, "playlist%d", i); xmms_cfg_read_string(cfgfile, "bte", buttontext, &btecfg.playlist[i]); } xmms_cfg_read_string(cfgfile, "bte", "button_play", &btecfg.button_play); xmms_cfg_read_string(cfgfile, "bte", "button_stop", &btecfg.button_stop); xmms_cfg_read_string(cfgfile, "bte", "button_next", &btecfg.button_next); xmms_cfg_read_string(cfgfile, "bte", "button_prev", &btecfg.button_prev); xmms_cfg_read_string(cfgfile, "bte", "button_pause", &btecfg.button_pause); xmms_cfg_read_string(cfgfile, "bte", "button_seekf", &btecfg.button_seekf); xmms_cfg_read_string(cfgfile, "bte", "button_seekb", &btecfg.button_seekb); xmms_cfg_read_string(cfgfile, "bte", "button_volup", &btecfg.button_volup); xmms_cfg_read_string(cfgfile, "bte", "button_voldown", &btecfg.button_voldown); xmms_cfg_read_string(cfgfile, "bte", "button_shuffle", &btecfg.button_shuffle); xmms_cfg_read_string(cfgfile, "bte", "button_repeat", &btecfg.button_repeat); xmms_cfg_read_string(cfgfile, "bte", "button_playlist", &btecfg.button_playlist); xmms_cfg_read_string(cfgfile, "bte", "button_plus100", &btecfg.button_plus100); xmms_cfg_free(cfgfile); } g_free(filename); } void bte_save_config(void) { ConfigFile *cfgfile; gchar *filename, buttontext[20]; gint i; filename = g_strconcat(g_get_home_dir(), "/.xmms/config", NULL); cfgfile = xmms_cfg_open_file(filename); if (!cfgfile) cfgfile = xmms_cfg_new(); xmms_cfg_write_string(cfgfile, "bte", "device", btecfg.device); xmms_cfg_write_int(cfgfile, "bte", "baudrate", btecfg.baudrate); for (i = 0; i < 10; i++) { sprintf(buttontext, "button%d", i); xmms_cfg_write_string(cfgfile, "bte", buttontext, btecfg.button[i]); sprintf(buttontext, "playlist%d", i); xmms_cfg_write_string(cfgfile, "bte", buttontext, btecfg.playlist[i]); } for (i = 10; i < 100; i++) { sprintf(buttontext, "playlist%d", i); xmms_cfg_write_string(cfgfile, "bte", buttontext, btecfg.playlist[i]); } xmms_cfg_write_string(cfgfile, "bte", "button_play", btecfg.button_play); xmms_cfg_write_string(cfgfile, "bte", "button_stop", btecfg.button_stop); xmms_cfg_write_string(cfgfile, "bte", "button_next", btecfg.button_next); xmms_cfg_write_string(cfgfile, "bte", "button_prev", btecfg.button_prev); xmms_cfg_write_string(cfgfile, "bte", "button_pause", btecfg.button_pause); xmms_cfg_write_string(cfgfile, "bte", "button_seekf", btecfg.button_seekf); xmms_cfg_write_string(cfgfile, "bte", "button_seekb", btecfg.button_seekb); xmms_cfg_write_string(cfgfile, "bte", "button_volup", btecfg.button_volup); xmms_cfg_write_string(cfgfile, "bte", "button_voldown", btecfg.button_voldown); xmms_cfg_write_string(cfgfile, "bte", "button_shuffle", btecfg.button_shuffle); xmms_cfg_write_string(cfgfile, "bte", "button_repeat", btecfg.button_repeat); xmms_cfg_write_string(cfgfile, "bte", "button_playlist", btecfg.button_playlist); xmms_cfg_write_string(cfgfile, "bte", "button_plus100", btecfg.button_plus100); xmms_cfg_write_file(cfgfile, filename); xmms_cfg_free(cfgfile); g_free(filename); } #define SEND_CMD(command, answer) \ bt_put_command (command, answer, sizeof (answer), 5, NULL); #define IS_OK(answer) (strstr(answer, "OK") != NULL) char* bte_poll_key() { char answer[1024], *key; if (bt_read_tmo(answer, sizeof(answer), 10) < 0) return NULL; if ((key = strstr(answer, "+CKEV:"))) { key += 7; key[1] = 0; return key; } return NULL; } static void handle_key_press(char* key, int real) { char* text = key; //printf("key press=%s\n", key); if (real) { key_pressed = 1; strcpy(last_key, key); } // just skip everything beside char text[1] = 0; if (!strcmp(text, btecfg.button_play)) { xmms_remote_play(bte_gp.xmms_session); } else if (!strcmp(text, btecfg.button_stop)) { xmms_remote_stop(bte_gp.xmms_session); } else if (!strcmp(text, btecfg.button_pause)) { xmms_remote_pause(bte_gp.xmms_session); } else if (!strcmp(text, btecfg.button_shuffle)) { xmms_remote_toggle_shuffle(bte_gp.xmms_session); } else if (!strcmp(text, btecfg.button_repeat)) { xmms_remote_toggle_repeat(bte_gp.xmms_session); } else if (!strcmp(text, btecfg.button_next)) { xmms_remote_playlist_next(bte_gp.xmms_session); } else if (!strcmp(text, btecfg.button_prev)) { xmms_remote_playlist_prev(bte_gp.xmms_session); } else if (!strcmp(text, btecfg.button_seekf)) { gint playlist_time, output_time, playlist_pos; playlist_pos = xmms_remote_get_playlist_pos(bte_gp.xmms_session); playlist_time = xmms_remote_get_playlist_time(bte_gp.xmms_session, playlist_pos); output_time = xmms_remote_get_output_time(bte_gp.xmms_session); if (playlist_time - output_time < 5000) output_time = playlist_time - 5000; xmms_remote_jump_to_time(bte_gp.xmms_session, output_time + 5000); } else if (!strcmp(text, btecfg.button_seekb)) { gint output_time; output_time = xmms_remote_get_output_time(bte_gp.xmms_session); if (output_time < 5000) output_time = 5000; xmms_remote_jump_to_time(bte_gp.xmms_session, output_time - 5000); } else if (!strcmp(text, btecfg.button_volup)) { gint vr, vl; xmms_remote_get_volume(bte_gp.xmms_session, &vl, &vr); if (vl > 95) vl = 95; if (vr > 95) vr = 95; xmms_remote_set_volume(bte_gp.xmms_session, vl + 5, vr + 5); } else if (!strcmp(text, btecfg.button_voldown)) { gint vr, vl; xmms_remote_get_volume(bte_gp.xmms_session, &vl, &vr); if (vl < 5) vl = 5; if (vr < 5) vr = 5; xmms_remote_set_volume(bte_gp.xmms_session, vl - 5, vr - 5); } } static void handle_key_release(char* key, int real) { //printf("key release=%s\n", key); if (real) key_pressed = 0; } static void handle_command(char* cmd) { char answer[1024]; char *prev, *next, *key; //skip starting \n and \r if (cmd[0] == '\r') cmd++; if (cmd[0] == '\n') cmd++; // most common case if (!cmd[0]) return; // if recieved multiline command - handle line by line and return prev = cmd; next = strchr(cmd, '\r'); if (next) { char copy[1024]; int len; do { len = next-prev; if (len > 2) { memcpy(copy, prev, len); copy[len] = 0; handle_command(copy); } prev = next+1; } while ((next = strchr(prev, '\r'))) ; // now return return; } // create widget to recieve phone key presses if (memcmp(cmd, "*EAAI", 5) == 0) { SEND_CMD("AT*EAID=13,1,\"XMMS Remote\"\r", answer); handle_command(answer); // start events forwarding SEND_CMD("AT+CMER=3,2,0,0,0\r", answer); handle_command(answer); return; } // "No" pressed/released - dismiss if (memcmp(cmd, "+CKEV: e", 8) == 0 || memcmp(cmd, "*EAII", 5) == 0) { // finish events forwarding SEND_CMD("AT+CMER=0,0,0,0,0\r", answer); handle_command(answer); return; } // here we handle different keypresses if (memcmp(cmd, "+CKEV:", 6) == 0) { key = cmd+7; if (key[2] == '1') handle_key_press(key, 1); else if (key[2] == '0') handle_key_release(key, 1); else printf("something wrong: key should be pressed or released: cmd=%s\n", cmd); return; } // printf("unhandled cmd %s %d\n", cmd, cmd[0]); } static int read_command(char* buf, int l) { int ch, len = 0; char* p = buf; while (len < l) { ch = bt_readchar(100); if (ch >= 0 && ch != '\r'){ *p++ = (char)ch; len++; } else { break; } } buf[len] = 0; return len; } static void *xmms_bte_routine(void *arg) { char answer[1024]; GTimer *timer1; timer1 = g_timer_new(); bte_open_port(btecfg.device); if (create_menu() < 0) goto done; key_pressed = 0; while (keepGoing) { // so config dialog could read keypresses if (!bteconf_is_going) { if (read_command(answer, sizeof(answer))) { handle_command(answer); } if (key_pressed == 0) { g_timer_reset(timer1); } else { if (key_pressed && g_timer_elapsed(timer1, NULL) > 0.2) { handle_key_press(last_key, 0); g_timer_reset(timer1); } } } else { // reset pressed key key_pressed = 0; } usleep(50000); } done: g_timer_destroy(timer1); bte_close_port(); pthread_exit(NULL); return NULL; } static int create_menu(void) { int rv = 0; char answer[1024]; // bad device if (bte_get_portfd() <= 0) return -1; // we don't need echoing of our input SEND_CMD("ATE0\r", answer) SEND_CMD("AT+CSCS=\"8859-1\"\r", answer); SEND_CMD("AT*EAM=\"XMMS remote\"\r", answer); handle_command(answer); return rv; } btexmms/src/about.c0100664000076400007640000000456707543136064013277 0ustar nikenike/* * XMMS is Copyright (C) 1998-2000 Peter Alm, Mikael Alm, Olle Hallnas, Thomas Nilsson and 4Front Technologies * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "bte.h" static GtkWidget *about_win; void bte_about(void) { GtkWidget *vbox, *frame, *label, *box, *button, *textbox; if (about_win) return; about_win = gtk_window_new(GTK_WINDOW_DIALOG); gtk_signal_connect(GTK_OBJECT(about_win), "destroy", GTK_SIGNAL_FUNC(gtk_widget_destroyed), &about_win); gtk_window_set_title(GTK_WINDOW(about_win), _("About")); gtk_window_set_policy(GTK_WINDOW(about_win), FALSE, FALSE, FALSE); gtk_window_set_position(GTK_WINDOW(about_win), GTK_WIN_POS_MOUSE); gtk_container_border_width(GTK_CONTAINER(about_win), 10); vbox = gtk_vbox_new(FALSE, 10); gtk_container_add(GTK_CONTAINER(about_win), vbox); frame = gtk_frame_new(_("XMMS BTE Plugin:")); gtk_box_pack_start(GTK_BOX(vbox), frame, FALSE, FALSE, 0); textbox = gtk_vbox_new(FALSE, 10); gtk_container_border_width(GTK_CONTAINER(textbox), 10); gtk_container_add(GTK_CONTAINER(frame), textbox); label = gtk_label_new(_("Created by Nikolay Igotti \n" "Control XMMS with your Ericsson phone\n" "Based on IRman plugin\n" "BTE page - http://www.lyola.com/bte")); gtk_box_pack_start_defaults(GTK_BOX(textbox), label); box = gtk_hbutton_box_new(); gtk_button_box_set_spacing(GTK_BUTTON_BOX(box), 5); gtk_box_pack_start(GTK_BOX(vbox), box, FALSE, FALSE, 0); button = gtk_button_new_with_label(_("Ok")); gtk_signal_connect_object(GTK_OBJECT(button), "clicked", GTK_SIGNAL_FUNC(gtk_widget_destroy), GTK_OBJECT(about_win)); GTK_WIDGET_SET_FLAGS(button, GTK_CAN_DEFAULT); gtk_box_pack_start(GTK_BOX(box), button, TRUE, TRUE, 0); gtk_widget_grab_default(button); gtk_widget_show(button); gtk_widget_show(box); gtk_widget_show(frame); gtk_widget_show(textbox); gtk_widget_show(label); gtk_widget_show(vbox); gtk_widget_show(about_win); } btexmms/src/btio.h0100664000076400007640000000067307543160745013124 0ustar nikenike#ifndef _BTIO_H #define _BTIO_H int bt_init_port(char* port); int bt_open_port(char* port); int bt_close_port(); int bt_read(char* buf, int len); int bt_read_tmo(char* buf, int len, int timeout); int bt_readchar(int timeout); int bt_writechar(char data); int bt_write(char* buf, int len); int bt_put_command(char* command, char* answer, int max, int timeout, char* expect); int bt_getfd(void); #endif btexmms/src/bte.h0100664000076400007640000000324307543647573012746 0ustar nikenike/* * XMMS is Copyright (C) 1998-2000 Peter Alm, Mikael Alm, Olle Hallnas, Thomas Nilsson and 4Front Technologies * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef _BTE_H_ #define _BTE_H_ /* System general includes */ #include #include #include #include #include #include #include #include #include /* XMMS-required includes (glib, threads) */ #include #include #include #include void bte_about(void); void bte_configure(void); void bte_open_port(gchar * bt_port); void bte_close_port(void); void bte_read_config(void); void bte_save_config(void); int bte_get_portfd(void); char* bte_poll_key(); typedef struct { gchar *device; gint baudrate; gchar *button_play, *button_stop, *button_next, *button_prev; gchar *button_pause, *button_seekf, *button_seekb; gchar *button_volup, *button_voldown, *button_plus100; gchar *button_shuffle, *button_repeat, *button_playlist; gchar *button[10], *playlist[100]; } bteConfig; extern bteConfig btecfg; extern gboolean bteconf_is_going; // will be i18n #define _(x) (x) #define N_(x) (x) #endif /* _IR_H_ */ btexmms/src/btio.c0100664000076400007640000001451607543647402013120 0ustar nikenike#include "btio.h" #include "bte.h" /* System general includes */ #include #include #include #include #include #include #include #include #include #include #include #include #include static int portfd = 0; static int portflags = 0; static int oldflags = 0; static struct termios oldterm; static struct termios portterm; static int rtscts=0; static int get_baudrate(int); int bt_init_port(char* port) { int baudrate = get_baudrate(btecfg.baudrate); /* get a file descriptor */ if ((portfd = open(port, O_RDWR | O_NOCTTY | O_NDELAY)) < 0) { portfd = 0; return -1; } /* check to see that the file is a terminal */ if (!isatty(portfd)) { return -1; } /* get port attributes, store in oldterm */ if (tcgetattr(portfd, &oldterm) < 0) { return -1; } /* get port flags, save in oldflags */ if ((oldflags = fcntl(portfd, F_GETFL)) < 0) { return -1; } portterm = oldterm; portflags = oldflags; portterm.c_cflag = baudrate | CRTSCTS | CS8 | CLOCAL | CREAD | O_NDELAY; if (!rtscts) portterm.c_cflag &= ~CRTSCTS; portterm.c_iflag = IGNPAR; portterm.c_oflag = 0; portterm.c_lflag = 0; portterm.c_cc[VTIME] = 0; portterm.c_cc[VMIN] = 0; tcflush(portfd, TCIOFLUSH); if (tcsetattr(portfd,TCSANOW,&portterm) < 0) { return -1; } /* set non-blocking */ if (fcntl(portfd, F_SETFL, (portflags |= O_NONBLOCK)) < 0) { return -1; } return 0; } int bt_open_port(char* port) { return bt_init_port(port); } int bt_close_port() { int retval = 0; if (!portfd) { /* already closed */ return -1; } /* restore old settings */ if (tcsetattr(portfd, TCSADRAIN, &oldterm) < 0) { retval = -1; } if (fcntl(portfd, F_SETFL, oldflags) < 0) { retval = -1; } close(portfd); portfd = 0; return retval; } int bt_read(char* buf, int len) { return read(portfd, buf, len); } int bt_read_tmo(char* buf, int len, int timeout) { int ok; fd_set rdfds; struct timeval tv; FD_ZERO(&rdfds); FD_SET(portfd, &rdfds); /* block until something to read or timeout occurs. select() is damn cool */ if (timeout < 0) { ok = select(portfd + 1, &rdfds, NULL, NULL, NULL); } else { tv.tv_sec = timeout / 1000000; tv.tv_usec = (timeout % 1000000); ok = select(portfd + 1, &rdfds, NULL, NULL, &tv); } if (ok > 0) { ok = read(portfd, buf, len); if (ok == 0) { return EOF; } return ok; } else { if (ok < 0) { return -1; } else { errno = ETIMEDOUT; return 0; } } } int bt_readchar(int timeout) { char buf[1]; int rv = bt_read_tmo(buf, 1, timeout); if (rv == 1) return buf[0]; if (rv == 0) return EOF - 1; return EOF; } int bt_writechar(char data) { char buf[1]; int rv = bt_write(buf, 1); return (rv == 1 ? 0 : -1); } int bt_write(char* buf, int len) { return write(portfd, buf, len); } int bt_getfd(void) { return portfd; } #define WINDOWS 1 int bt_put_command(char* command, char* answer, int max, int timeout, char* expect) { int count=0; int readcount; int toread; char tmp[100]; int timeoutcounter=0; int found=0; int available; int status; char loganswer[2048]; // send command if (command && command[0]) { // Cycwin does not support TIOC functions and has not workaround for this. // So do not check CTS on Cygwin. #ifndef WINDOWS if (rtscts) { ioctl(portfd, TIOCMGET, &status); while (!(status & TIOCM_CTS)) { usleep(100000); timeoutcounter++; ioctl(portfd, TIOCMGET, &status); if (timeoutcounter>=timeout) { return 0; } } } #endif write(portfd,command,strlen(command)); tcdrain(portfd); } answer[0]=0; do { // try to read some bytes. // Cygwin does not support TIOC functions and has not workaround for this. // So do not check number of available bytes #ifndef WINDOWS ioctl(portfd,FIONREAD,&available); // how many bytes are available to read? if (available<1) // if 0 then wait a little bit and retry { usleep(100000); //write(1,".",1); timeoutcounter++; ioctl(portfd,FIONREAD,&available); } #else // Only for Windows. Read as much as possible usleep(100000); //write(1,".",1); timeoutcounter++; available=sizeof(tmp)-1; #endif if (available>0) { // How many bytes do I want to read maximum? Not more than tmp buffer size. toread=max-count-1; if (toread>sizeof(tmp)-1) toread=sizeof(tmp)-1; // And how many bytes are available? if (available /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile all-redirect: all-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-tags clean-generic mostlyclean-am clean: clean-recursive distclean-am: distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive -rm -f config.status maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -rm -f config.status .PHONY: install-data-recursive uninstall-data-recursive \ install-exec-recursive uninstall-exec-recursive installdirs-recursive \ uninstalldirs-recursive all-recursive check-recursive \ installcheck-recursive info-recursive dvi-recursive \ mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ install-exec install-data-am install-data install-am install \ uninstall-am uninstall all-redirect all-am all installdirs-am \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: btexmms/TODO0100664000076400007640000000007107543204304011675 0ustar nikenike - config save doesn't work yet - playlist doesn't work btexmms/missing0100755000076400007640000001451007543127476012623 0ustar nikenike#! /bin/sh # Common stub for a few missing GNU programs while installing. # Copyright (C) 1996, 1997, 2001 Free Software Foundation, Inc. # Franc,ois Pinard , 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2, or (at your option) # any later version. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. if test $# -eq 0; then echo 1>&2 "Try \`$0 --help' for more information" exit 1 fi # In the cases where this matters, `missing' is being run in the # srcdir already. if test -f configure.in; then configure_ac=configure.ac else configure_ac=configure.in fi case "$1" in -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: -h, --help display this help and exit -v, --version output version information and exit Supported PROGRAM values: aclocal touch file \`aclocal.m4' autoconf touch file \`configure' autoheader touch file \`config.h.in' automake touch all \`Makefile.in' files bison create \`y.tab.[ch]', if possible, from existing .[ch] flex create \`lex.yy.c', if possible, from existing .c lex create \`lex.yy.c', if possible, from existing .c makeinfo touch the output file yacc create \`y.tab.[ch]', if possible, from existing .[ch]" ;; -v|--v|--ve|--ver|--vers|--versi|--versio|--version) echo "missing - GNU libit 0.0" ;; -*) echo 1>&2 "$0: Unknown \`$1' option" echo 1>&2 "Try \`$0 --help' for more information" exit 1 ;; aclocal) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acinclude.m4' or \`$configure_ac'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." touch aclocal.m4 ;; autoconf) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`$configure_ac'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." touch configure ;; autoheader) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`acconfig.h' or \`$configure_ac'. You might want to install the \`Autoconf' and \`GNU m4' packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' $configure_ac` test -z "$files" && files="config.h" touch_files= for f in $files; do case "$f" in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; esac done touch $touch_files ;; automake) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified \`Makefile.am', \`acinclude.m4' or \`$configure_ac'. You might want to install the \`Automake' and \`Perl' packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; bison|yacc) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.y' file. You may need the \`Bison' package in order for those modifications to take effect. You can get \`Bison' from any GNU archive site." rm -f y.tab.c y.tab.h if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" y.tab.h fi ;; esac fi if [ ! -f y.tab.h ]; then echo >y.tab.h fi if [ ! -f y.tab.c ]; then echo 'main() { return 0; }' >y.tab.c fi ;; lex|flex) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.l' file. You may need the \`Flex' package in order for those modifications to take effect. You can get \`Flex' from any GNU archive site." rm -f lex.yy.c if [ $# -ne 1 ]; then eval LASTARG="\${$#}" case "$LASTARG" in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` if [ -f "$SRCFILE" ]; then cp "$SRCFILE" lex.yy.c fi ;; esac fi if [ ! -f lex.yy.c ]; then echo 'main() { return 0; }' >lex.yy.c fi ;; makeinfo) echo 1>&2 "\ WARNING: \`$1' is missing on your system. You should only need it if you modified a \`.texi' or \`.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious call might also be the consequence of using a buggy \`make' (AIX, DU, IRIX). You might want to install the \`Texinfo' package or the \`GNU make' package. Grab either from any GNU archive site." file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` if test -z "$file"; then file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file` fi touch $file ;; *) echo 1>&2 "\ WARNING: \`$1' is needed, and you do not seem to have it handy on your system. You might have modified some files without having the proper tools for further handling them. Check the \`README' file, it often tells you about the needed prerequirements for installing this package. You may also peek at any GNU archive site, in case some other package would contain this missing \`$1' program." exit 1 ;; esac exit 0 btexmms/AUTHORS0100664000076400007640000000004407543122273012261 0ustar nikenikeNikolay Igotti (olonho@hotmail.com) btexmms/INSTALL0100664000076400007640000000010307543125105012233 0ustar nikenike(1) ./configure (2) make (3) su -c "make install" see README then btexmms/ChangeLog0100664000076400007640000000050307543653761012776 0ustar nikenikeSat Sep 21 20:57:32 2002: Started. First working version. Mon Sep 23 13:24:22 2002: Version 0.3 released. Implemented long key presses (i.e. emulation of multiple presses), configuration save/restore. Mon Sep 23 22:03:26 2002: Version 0.4 released. Cleaner phone interface. Plugin seems to be really useable now. btexmms/config.log0100664000076400007640000001203407543647536013201 0ustar nikenikeThis file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. configure:743: checking for a BSD compatible install configure:796: checking whether build environment is sane configure:853: checking whether make sets ${MAKE} configure:899: checking for working aclocal configure:912: checking for working autoconf configure:925: checking for working automake configure:938: checking for working autoheader configure:951: checking for working makeinfo configure:969: checking for gcc configure:1082: checking whether the C compiler (gcc ) works configure:1098: gcc -o conftest conftest.c 1>&5 configure:1124: checking whether the C compiler (gcc ) is a cross-compiler configure:1129: checking whether we are using GNU C configure:1138: gcc -E conftest.c configure:1157: checking whether gcc accepts -g configure:1200: checking for a BSD compatible install configure:1264: checking for Cygwin environment configure:1280: gcc -c -g -O2 conftest.c 1>&5 configure: In function `main': configure:1276: `__CYGWIN32__' undeclared (first use in this function) configure:1276: (Each undeclared identifier is reported only once configure:1276: for each function it appears in.) configure: failed program was: #line 1269 "configure" #include "confdefs.h" int main() { #ifndef __CYGWIN__ #define __CYGWIN__ __CYGWIN32__ #endif return __CYGWIN__; ; return 0; } configure:1297: checking for mingw32 environment configure:1309: gcc -c -g -O2 conftest.c 1>&5 configure: In function `main': configure:1305: `__MINGW32__' undeclared (first use in this function) configure:1305: (Each undeclared identifier is reported only once configure:1305: for each function it appears in.) configure: failed program was: #line 1302 "configure" #include "confdefs.h" int main() { return __MINGW32__; ; return 0; } configure:1326: checking how to run the C preprocessor configure:1347: gcc -E conftest.c >/dev/null 2>conftest.out configure:1481: checking host system type configure:1502: checking build system type configure:1531: checking for ld used by GCC configure:1599: checking if the linker (/usr/bin/ld) is GNU ld GNU ld version 2.10.90 (with BFD 2.10.0.18) configure:1616: checking for /usr/bin/ld option to reload object files configure:1628: checking for BSD-compatible nm configure:1666: checking whether ln -s works configure:1687: checking how to recognise dependant libraries configure:1870: checking for object suffix configure:1876: gcc -c -g -O2 conftest.c 1>&5 configure:1896: checking for executable suffix configure:1906: gcc -o conftest -g -O2 conftest.c 1>&5 configure:1937: checking command to parse /usr/bin/nm -B output configure:2017: gcc -c -g -O2 conftest.c 1>&5 configure:2020: /usr/bin/nm -B conftest.o | sed -n -e 's/^.*[ ]\([ABCDGISTW][ABCDGISTW]*\)[ ][ ]*\(\)\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2\3 \3/p' > conftest.nm configure:2071: gcc -o conftest -g -O2 conftest.c conftstm.o 1>&5 configure:2120: checking for dlfcn.h configure:2130: gcc -E conftest.c >/dev/null 2>conftest.out configure:2298: checking for ranlib configure:2365: checking for strip configure:2608: checking for objdir configure:2635: checking for gcc option to produce PIC configure:2787: checking if gcc PIC flag -fPIC works configure:2801: gcc -c -g -O2 -fPIC -DPIC conftest.c 1>&5 configure:2853: checking if gcc static flag -static works configure:2868: gcc -o conftest -g -O2 -static conftest.c 1>&5 configure:2895: checking if gcc supports -c -o file.o configure:2914: gcc -c -g -O2 -o out/conftest2.o conftest.c 1>&5 configure:2943: checking if gcc supports -c -o file.lo configure:2961: gcc -c -g -O2 -c -o conftest.lo conftest.c 1>&5 configure:3011: checking if gcc supports -fno-rtti -fno-exceptions configure:3024: gcc -c -g -O2 -fno-rtti -fno-exceptions -c conftest.c conftest.c 1>&5 configure:3051: checking whether the linker (/usr/bin/ld) supports shared libraries configure:3735: checking how to hardcode library paths into programs configure:3763: checking whether stripping libraries is possible configure:3777: checking dynamic linker characteristics configure:4174: checking if libtool supports shared libraries configure:4178: checking whether to build shared libraries configure:4201: checking whether to build static libraries configure:4737: checking whether -lc should be explicitly linked in configure:4744: gcc -c -g -O2 conftest.c 1>&5 configure:4757: gcc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2>&1 | grep -lc >/dev/null 2>&1 configure:5392: checking for glib-config configure:5427: checking for GLIB - version >= 1.2.0 configure:5526: gcc -o conftest -g -O2 -I/usr/lib/glib/include conftest.c -L/usr/lib -lglib 1>&5 configure:5659: checking for gtk-config configure:5694: checking for GTK - version >= 1.2.0 configure:5795: gcc -o conftest -g -O2 -I/usr/lib/glib/include -I/usr/X11R6/include conftest.c -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm 1>&5 configure:5913: checking for xmms-config configure:5977: checking for gawk configure:6043: checking for XMMS - version >= 1.0.0 btexmms/CREDITS0100664000076400007640000000020607543305573012237 0ustar nikenike - Ralf Ackermann - for BT_REMOTE program - Charles Sielski - for IRman XMMS plugin btexmms/README0100664000076400007640000000367507543615534012115 0ustar nikenikeRemote control XMMS from your Ericsson phone (using Bluetooth). To start you need working bluetooth connectivity between your phone and box, and some tools. REQUIRED: 1. Bluetooth hardware (I'm using BlueGear USB dongle on oldish Compaq Presario 1200 notebook) 2. Ericsson phone, I'm using T68, but it should work with some others 3. Bluetooth stack for Linux - see http://bluez.sourceforge.net 4. rfcomm - get it from http://www.holtmann.org/linux/bluetooth/rfcomm.html and follow instructions in tarball (do not use rfcomm from bluez - for now (Sat Sep 21 21:19:07 MSD 2002) it doesn't work well) 5. xmms, see http://xmms.org TO START: 1. when everything is installed - pair your phone with computer Connect/Bluetooth/Paired Devices/Add device find your PC in here and pair them 2. put phone in discoverable mode Connect/Bluetooth/Discoverable (this step seems not to be required) 3. use hcitool to find device, like this root@lyola:/home/nike >hcitool scan Scanning ... 00:80:37:9E:6C:31 T68nike 4. set up rfcomm connection to device, like this rfcomm 0 00:80:37:9E:6C:31 2 Connected /dev/ttyU0 to 00:80:37:9E:6C:31 on channel 2 5. Now you have your serial port /dev/ttyU0 (major 208, minor 0 - served by ussp module from RFCOMM distribution, add alias char-major-208 ussp to modules.conf to avoid manual modprobe) connected to the phone and could give it AT commands with your favorite terminal (don't forget to disable hardware flow control on this port) 6. Start XMMS, 7. Go to Connection/Accessories XMMS Remote and start it - now you could learn XMMS your preferred keys and have fun TIPS: 1. Don't bind any actions on '#' key - it crashes my phone for unknown reasons CREDITS: Ralf Ackermann - for BT_REMOTE program see http://www.iptel-now.de/HOWTO/BT_REMOTE/bt_remote.html Charles Sielski - for IRman XMMS plugin Peter Alm - for XMMS btexmms/Makefile0100664000076400007640000002607707543647537012706 0ustar nikenike# Generated automatically from Makefile.in by configure. # Makefile.in generated automatically by automake 1.4-p5 from Makefile.am # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. SHELL = /bin/sh srcdir = . top_srcdir = . prefix = /usr/local exec_prefix = ${prefix} bindir = ${exec_prefix}/bin sbindir = ${exec_prefix}/sbin libexecdir = ${exec_prefix}/libexec datadir = ${prefix}/share sysconfdir = ${prefix}/etc sharedstatedir = ${prefix}/com localstatedir = ${prefix}/var libdir = ${exec_prefix}/lib infodir = ${prefix}/info mandir = ${prefix}/man includedir = ${prefix}/include oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/btexmms pkglibdir = $(libdir)/btexmms pkgincludedir = $(includedir)/btexmms top_builddir = . ACLOCAL = aclocal AUTOCONF = autoconf AUTOMAKE = automake AUTOHEADER = autoheader INSTALL = /usr/bin/install -c INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = ${INSTALL} -m 644 INSTALL_SCRIPT = ${INSTALL_PROGRAM} transform = s,x,x, NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = i586-pc-linux-gnu host_triplet = i586-pc-linux-gnu AS = @AS@ AWK = gawk CC = gcc DLLTOOL = @DLLTOOL@ ECHO = echo EXEEXT = GLIB_CFLAGS = -I/usr/lib/glib/include GLIB_CONFIG = /usr/bin/glib-config GLIB_LIBS = -L/usr/lib -lglib GTK_CFLAGS = -I/usr/lib/glib/include -I/usr/X11R6/include GTK_CONFIG = /usr/bin/gtk-config GTK_LIBS = -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s MAKEINFO = makeinfo OBJDUMP = @OBJDUMP@ OBJEXT = o PACKAGE = btexmms RANLIB = ranlib STRIP = strip VERSION = 0.4 XMMS_CFLAGS = -I/usr/local/include -I/usr/local/include/xmms -I/usr/lib/glib/include -I/usr/X11R6/include XMMS_CONFIG = /usr/local/bin/xmms-config XMMS_DATA_DIR = /usr/local/share/xmms XMMS_EFFECT_PLUGIN_DIR = /usr/local/lib/xmms/Effect XMMS_GENERAL_PLUGIN_DIR = /usr/local/lib/xmms/General XMMS_INPUT_PLUGIN_DIR = /usr/local/lib/xmms/Input XMMS_LIBS = -L/usr/local/lib -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm -lxmms XMMS_OUTPUT_PLUGIN_DIR = /usr/local/lib/xmms/Output XMMS_PLUGIN_DIR = /usr/local/lib/xmms XMMS_VERSION = 1.2.7 XMMS_VISUALIZATION_PLUGIN_DIR = /usr/local/lib/xmms/Visualization plugindir = /usr/local/lib/xmms/Input SUBDIRS = src EXTRA_DIST = AUTHORS COPYING ChangeLog INSTALL README TODO AUTOMAKE_OPTIONS = foreign ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_CLEAN_FILES = DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \ Makefile.in TODO aclocal.m4 config.guess config.sub configure \ configure.in install-sh ltmain.sh missing mkinstalldirs DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = gtar GZIP_ENV = --best all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status $(ACLOCAL_M4): configure.in cd $(srcdir) && $(ACLOCAL) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" != "." || dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist -rm -rf $(distdir) GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz mkdir $(distdir)/=build mkdir $(distdir)/=inst dc_install_base=`cd $(distdir)/=inst && pwd`; \ cd $(distdir)/=build \ && ../configure --srcdir=.. --prefix=$$dc_install_base \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) dist -rm -rf $(distdir) @banner="$(distdir).tar.gz is ready for distribution"; \ dashes=`echo "$$banner" | sed s/./=/g`; \ echo "$$dashes"; \ echo "$$banner"; \ echo "$$dashes" dist: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) dist-all: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) here=`cd $(top_builddir) && pwd`; \ top_distdir=`cd $(distdir) && pwd`; \ distdir=`cd $(distdir) && pwd`; \ cd $(top_srcdir) \ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive install-exec-am: install-exec: install-exec-recursive install-data-am: install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile all-redirect: all-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-tags clean-generic mostlyclean-am clean: clean-recursive distclean-am: distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive -rm -f config.status maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -rm -f config.status .PHONY: install-data-recursive uninstall-data-recursive \ install-exec-recursive uninstall-exec-recursive installdirs-recursive \ uninstalldirs-recursive all-recursive check-recursive \ installcheck-recursive info-recursive dvi-recursive \ mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ install-exec install-data-am install-data install-am install \ uninstall-am uninstall all-redirect all-am all installdirs-am \ installdirs mostlyclean-generic distclean-generic clean-generic \ maintainer-clean-generic clean mostlyclean distclean maintainer-clean # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: btexmms/bootstrap0100775000076400007640000000010007543131376013151 0ustar nikenike#! /bin/sh aclocal && automake --copy --add-missing && autoconf btexmms/aclocal.m40100664000076400007640000042434107543647416013076 0ustar nikenikednl aclocal.m4 generated automatically by aclocal 1.4-p5 dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. # serial 1 dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN([AM_INIT_AUTOMAKE], [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) VERSION=[$2] AC_SUBST(VERSION) dnl test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) AC_REQUIRE([AM_SANITY_CHECK]) AC_REQUIRE([AC_ARG_PROGRAM]) dnl FIXME This is truly gross. missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) AC_REQUIRE([AC_PROG_MAKE_SET])]) # # Check to make sure that the build environment is sane. # AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "[$]*" != "X $srcdir/configure conftestfile" \ && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "[$]2" = conftestfile ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi rm -f conftest* AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. AC_DEFUN([AM_MISSING_PROG], [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if ($2 --version) < /dev/null > /dev/null 2>&1; then $1=$2 AC_MSG_RESULT(found) else $1="$3/missing $2" AC_MSG_RESULT(missing) fi AC_SUBST($1)]) # libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- # serial 46 AC_PROG_LIBTOOL AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Prevent multiple expansion define([AC_PROG_LIBTOOL], []) ]) AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl _LT_AC_PROG_ECHO_BACKSLASH # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], enable_win32_dll=yes, enable_win32_dll=no) AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_SAVE AC_LANG_C AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_RESTORE]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, [AC_TRY_LINK([], [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); DllMain (0, 0, 0);], [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) case $host/$CC in *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) # old mingw systems require "-dll" to link a DLL, while more recent ones # require "-mdll" SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -mdll" AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) CFLAGS="$SAVE_CFLAGS" ;; *-*-cygwin* | *-*-pw32*) # cygwin systems need to pass --dll to the linker, and not link # crt.o which will require a WinMain@16 definition. lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; esac ;; ]) esac _LT_AC_LTCONFIG_HACK ]) # AC_LIBTOOL_HEADER_ASSERT # ------------------------ AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT], [AC_CACHE_CHECK([whether $CC supports assert without backlinking], [lt_cv_func_assert_works], [case $host in *-*-solaris*) if test "$GCC" = yes && test "$with_gnu_ld" != yes; then case `$CC --version 2>/dev/null` in [[12]].*) lt_cv_func_assert_works=no ;; *) lt_cv_func_assert_works=yes ;; esac fi ;; esac]) if test "x$lt_cv_func_assert_works" = xyes; then AC_CHECK_HEADERS(assert.h) fi ])# AC_LIBTOOL_HEADER_ASSERT # _LT_AC_CHECK_DLFCN # -------------------- AC_DEFUN([_LT_AC_CHECK_DLFCN], [AC_CHECK_HEADERS(dlfcn.h) ])# _LT_AC_CHECK_DLFCN # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # --------------------------------- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([AC_PROG_NM]) AC_REQUIRE([AC_OBJEXT]) # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [dnl # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Transform the above into a raw symbol and a C symbol. symxfrm='\1 \2\3 \3' # Transform an extracted symbol line into a proper C declaration lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32*) symcode='[[ABCDGISTW]]' ;; hpux*) # Its linker distinguishes data from code symbols lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; irix*) symcode='[[BCDEGRST]]' ;; solaris* | sysv5*) symcode='[[BDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $host_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then symcode='[[ABCDGISTW]]' fi # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if egrep ' nm_test_var$' "$nlist" >/dev/null; then if egrep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr address; } lt_preloaded_symbols[[]] = { EOF sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext save_LIBS="$LIBS" save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$no_builtin_flag" if AC_TRY_EVAL(ac_link) && test -s conftest; then pipe_works=yes fi LIBS="$save_LIBS" CFLAGS="$save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AC_FD_CC fi else echo "cannot find nm_test_var in $nlist" >&AC_FD_CC fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AC_FD_CC fi else echo "$progname: failed program was:" >&AC_FD_CC cat conftest.$ac_ext >&5 fi rm -f conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" if test -z "$lt_cv_sys_global_symbol_pipe"; then global_symbol_to_cdecl= global_symbol_to_c_name_address= else global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" fi if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR # --------------------------------- AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], [# Find the correct PATH separator. Usually this is `:', but # DJGPP uses `;' like DOS. if test "X${PATH_SEPARATOR+set}" != Xset; then UNAME=${UNAME-`uname 2>/dev/null`} case X$UNAME in *-DOS) lt_cv_sys_path_separator=';' ;; *) lt_cv_sys_path_separator=':' ;; esac PATH_SEPARATOR=$lt_cv_sys_path_separator fi ])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR # _LT_AC_PROG_ECHO_BACKSLASH # -------------------------- # Add some code to the start of the generated configure script which # will find an echo command which doesn't interpret backslashes. AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], [AC_DIVERT_PUSH(NOTICE)]) _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ;; esac echo=${ECHO-echo} if test "X[$]1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X[$]1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi if test "X[$]1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null && echo_test_string="`eval $cmd`" && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL [$]0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL [$]0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "[$]0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" fi AC_SUBST(ECHO) AC_DIVERT_POP ])# _LT_AC_PROG_ECHO_BACKSLASH # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # ------------------------------------------------------------------ AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], [if test "$cross_compiling" = yes; then : [$4] else AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } exit (status); }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_unknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_AC_TRY_DLOPEN_SELF # AC_LIBTOOL_DLOPEN_SELF # ------------------- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; cygwin* | mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then LDFLAGS="$LDFLAGS $link_static_flag" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi ])# AC_LIBTOOL_DLOPEN_SELF AC_DEFUN([_LT_AC_LTCONFIG_HACK], [AC_REQUIRE([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])dnl # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e s/^X//' sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g' # Same as above, but do not quote variable references. double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g' # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except M$VC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" need_locks="$enable_libtool_lock" old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o if test x"$host" != x"$build"; then ac_tool_prefix=${host_alias}- else ac_tool_prefix= fi # Transform linux* to *-*-linux-gnu*, to support old configure scripts. case $host_os in linux-gnu*) ;; linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` esac case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ;; *) old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi # Allow CC to be a program name with arguments. set dummy $CC compiler="[$]2" AC_MSG_CHECKING([for objdir]) rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. objdir=_libs fi rmdir .libs 2>/dev/null AC_MSG_RESULT($objdir) AC_ARG_WITH(pic, [ --with-pic try to use only PIC/non-PIC objects [default=use both]], pic_mode="$withval", pic_mode=default) test -z "$pic_mode" && pic_mode=default # We assume here that the value for lt_cv_prog_cc_pic will not be cached # in isolation, and that seeing it set (from the cache) indicates that # the associated values are set (in the cache) correctly too. AC_MSG_CHECKING([for $compiler option to produce PIC]) AC_CACHE_VAL(lt_cv_prog_cc_pic, [ lt_cv_prog_cc_pic= lt_cv_prog_cc_shlib= lt_cv_prog_cc_wl= lt_cv_prog_cc_static= lt_cv_prog_cc_no_builtin= lt_cv_prog_cc_can_build_shared=$can_build_shared if test "$GCC" = yes; then lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-static' case $host_os in aix*) # Below there is a dirty hack to force normal static linking with -ldl # The problem is because libdl dynamically linked with both libc and # libC (AIX C++ library), which obviously doesn't included in libraries # list by gcc. This cause undefined symbols with -static flags. # This hack allows C programs to be linked with "-static -ldl", but # not sure about C++ programs. lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files lt_cv_prog_cc_pic='-fno-common' ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_cv_prog_cc_pic='-DDLL_EXPORT' ;; sysv4*MP*) if test -d /usr/nec; then lt_cv_prog_cc_pic=-Kconform_pic fi ;; *) lt_cv_prog_cc_pic='-fPIC' ;; esac else # PORTME Check for PIC flags for the system compiler. case $host_os in aix3* | aix4* | aix5*) lt_cv_prog_cc_wl='-Wl,' # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor lt_cv_prog_cc_static='-Bstatic' else lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' fi ;; hpux9* | hpux10* | hpux11*) # Is there a better lt_cv_prog_cc_static that works with the bundled CC? lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" lt_cv_prog_cc_pic='+Z' ;; irix5* | irix6*) lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-non_shared' # PIC (with -KPIC) is the default. ;; cygwin* | mingw* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). lt_cv_prog_cc_pic='-DDLL_EXPORT' ;; newsos6) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' ;; osf3* | osf4* | osf5*) # All OSF/1 code is PIC. lt_cv_prog_cc_wl='-Wl,' lt_cv_prog_cc_static='-non_shared' ;; sco3.2v5*) lt_cv_prog_cc_pic='-Kpic' lt_cv_prog_cc_static='-dn' lt_cv_prog_cc_shlib='-belf' ;; solaris*) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' lt_cv_prog_cc_wl='-Wl,' ;; sunos4*) lt_cv_prog_cc_pic='-PIC' lt_cv_prog_cc_static='-Bstatic' lt_cv_prog_cc_wl='-Qoption ld ' ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) lt_cv_prog_cc_pic='-KPIC' lt_cv_prog_cc_static='-Bstatic' if test "x$host_vendor" = xsni; then lt_cv_prog_cc_wl='-LD' else lt_cv_prog_cc_wl='-Wl,' fi ;; uts4*) lt_cv_prog_cc_pic='-pic' lt_cv_prog_cc_static='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then lt_cv_prog_cc_pic='-Kconform_pic' lt_cv_prog_cc_static='-Bstatic' fi ;; *) lt_cv_prog_cc_can_build_shared=no ;; esac fi ]) if test -z "$lt_cv_prog_cc_pic"; then AC_MSG_RESULT([none]) else AC_MSG_RESULT([$lt_cv_prog_cc_pic]) # Check to make sure the pic_flag actually works. AC_MSG_CHECKING([if $compiler PIC flag $lt_cv_prog_cc_pic works]) AC_CACHE_VAL(lt_cv_prog_cc_pic_works, [dnl save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" AC_TRY_COMPILE([], [], [dnl case $host_os in hpux9* | hpux10* | hpux11*) # On HP-UX, both CC and GCC only warn that PIC is supported... then # they create non-PIC objects. So, if there were any warnings, we # assume that PIC is not supported. if test -s conftest.err; then lt_cv_prog_cc_pic_works=no else lt_cv_prog_cc_pic_works=yes fi ;; *) lt_cv_prog_cc_pic_works=yes ;; esac ], [dnl lt_cv_prog_cc_pic_works=no ]) CFLAGS="$save_CFLAGS" ]) if test "X$lt_cv_prog_cc_pic_works" = Xno; then lt_cv_prog_cc_pic= lt_cv_prog_cc_can_build_shared=no else lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" fi AC_MSG_RESULT([$lt_cv_prog_cc_pic_works]) fi # Check for any special shared library compilation flags. if test -n "$lt_cv_prog_cc_shlib"; then AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries]) if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then : else AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure]) lt_cv_prog_cc_can_build_shared=no fi fi AC_MSG_CHECKING([if $compiler static flag $lt_cv_prog_cc_static works]) AC_CACHE_VAL([lt_cv_prog_cc_static_works], [dnl lt_cv_prog_cc_static_works=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" AC_TRY_LINK([], [], [lt_cv_prog_cc_static_works=yes]) LDFLAGS="$save_LDFLAGS" ]) # Belt *and* braces to stop my trousers falling down: test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= AC_MSG_RESULT([$lt_cv_prog_cc_static_works]) pic_flag="$lt_cv_prog_cc_pic" special_shlib_compile_flags="$lt_cv_prog_cc_shlib" wl="$lt_cv_prog_cc_wl" link_static_flag="$lt_cv_prog_cc_static" no_builtin_flag="$lt_cv_prog_cc_no_builtin" can_build_shared="$lt_cv_prog_cc_can_build_shared" # Check to see if options -o and -c are simultaneously supported by compiler AC_MSG_CHECKING([if $compiler supports -c -o file.$ac_objext]) AC_CACHE_VAL([lt_cv_compiler_c_o], [ $rm -r conftest 2>/dev/null mkdir conftest cd conftest echo "int some_variable = 0;" > conftest.$ac_ext mkdir out # According to Tom Tromey, Ian Lance Taylor reported there are C compilers # that will create temporary files in the current directory regardless of # the output directory. Thus, making CWD read-only will cause this test # to fail, enabling locking or at least warning the user not to do parallel # builds. chmod -w . save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" compiler_c_o=no if { (eval echo configure:__oline__: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s out/conftest.err; then lt_cv_compiler_c_o=no else lt_cv_compiler_c_o=yes fi else # Append any errors to the config.log. cat out/conftest.err 1>&AC_FD_CC lt_cv_compiler_c_o=no fi CFLAGS="$save_CFLAGS" chmod u+w . $rm conftest* out/* rmdir out cd .. rmdir conftest $rm -r conftest 2>/dev/null ]) compiler_c_o=$lt_cv_compiler_c_o AC_MSG_RESULT([$compiler_c_o]) if test x"$compiler_c_o" = x"yes"; then # Check to see if we can write to a .lo AC_MSG_CHECKING([if $compiler supports -c -o file.lo]) AC_CACHE_VAL([lt_cv_compiler_o_lo], [ lt_cv_compiler_o_lo=no save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -c -o conftest.lo" save_objext="$ac_objext" ac_objext=lo AC_TRY_COMPILE([], [int some_variable = 0;], [dnl # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then lt_cv_compiler_o_lo=no else lt_cv_compiler_o_lo=yes fi ]) ac_objext="$save_objext" CFLAGS="$save_CFLAGS" ]) compiler_o_lo=$lt_cv_compiler_o_lo AC_MSG_RESULT([$compiler_o_lo]) else compiler_o_lo=no fi # Check to see if we can do hard links to lock some files if needed hard_links="nottested" if test "$compiler_c_o" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([\`$CC' does not support \`-c -o', so \`make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi if test "$GCC" = yes; then # Check to see if options -fno-rtti -fno-exceptions are supported by compiler AC_MSG_CHECKING([if $compiler supports -fno-rtti -fno-exceptions]) echo "int some_variable = 0;" > conftest.$ac_ext save_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" compiler_rtti_exceptions=no AC_TRY_COMPILE([], [int some_variable = 0;], [dnl # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then compiler_rtti_exceptions=no else compiler_rtti_exceptions=yes fi ]) CFLAGS="$save_CFLAGS" AC_MSG_RESULT([$compiler_rtti_exceptions]) if test "$compiler_rtti_exceptions" = "yes"; then no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' else no_builtin_flag=' -fno-builtin' fi fi # See if the linker supports building shared libraries. AC_MSG_CHECKING([whether the linker ($LD) supports shared libraries]) allow_undefined_flag= no_undefined_flag= need_lib_prefix=unknown need_version=unknown # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments archive_cmds= archive_expsym_cmds= old_archive_from_new_cmds= old_archive_from_expsyms_cmds= export_dynamic_flag_spec= whole_archive_flag_spec= thread_safe_flag_spec= hardcode_into_libs=no hardcode_libdir_flag_spec= hardcode_libdir_separator= hardcode_direct=no hardcode_minus_L=no hardcode_shlibpath_var=unsupported runpath_var= link_all_deplibs=unknown always_export_symbols=no export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list include_expsyms= # exclude_expsyms can be an egrep regular expression of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. exclude_expsyms="_GLOBAL_OFFSET_TABLE_" # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; openbsd*) with_gnu_ld=no ;; esac ld_shlibs=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) # On AIX, the GNU linker is very broken # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. ld_shlibs=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can use # them. ld_shlibs=no ;; beos*) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then allow_undefined_flag=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else ld_shlibs=no fi ;; cygwin* | mingw* | pw32*) # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec='-L$libdir' allow_undefined_flag=unsupported always_export_symbols=yes extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ test -f $output_objdir/impgen.exe || (cd $output_objdir && \ if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ else $CC -o impgen impgen.c ; fi)~ $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' # cygwin and mingw dlls have different entry points and sets of symbols # to exclude. # FIXME: what about values for MSVC? dll_entry=__cygwin_dll_entry@12 dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ case $host_os in mingw*) # mingw values dll_entry=_DllMainCRTStartup@12 dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ ;; esac # mingw and cygwin differ, and it's simplest to just exclude the union # of the two symbol sets. dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 # recent cygwin and mingw systems supply a stub DllMain which the user # can override, but on older systems we have to supply one (in ltdll.c) if test "x$lt_cv_need_dllmain" = "xyes"; then ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' else ltdll_obj= ltdll_cmds= fi # Extract the symbol export list from an `--export-all' def file, # then regenerate the def file from the symbol export list, so that # the compiled dll only exports the symbol export list. # Be careful not to strip the DATA tag left be newer dlltools. export_symbols_cmds="$ltdll_cmds"' $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is. # If DATA tags from a recent dlltool are present, honour them! archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname-def; else echo EXPORTS > $output_objdir/$soname-def; _lt_hint=1; cat $export_symbols | while read symbol; do set dummy \$symbol; case \[$]# in 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; esac; _lt_hint=`expr 1 + \$_lt_hint`; done; fi~ '"$ltdll_cmds"' $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris* | sysv5*) if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then ld_shlibs=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; sunos4*) archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= hardcode_direct=yes hardcode_shlibpath_var=no ;; *) if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else ld_shlibs=no fi ;; esac if test "$ld_shlibs" = yes; then runpath_var=LD_RUN_PATH hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' export_dynamic_flag_spec='${wl}--export-dynamic' case $host_os in cygwin* | mingw* | pw32*) # dlltool doesn't understand --whole-archive et. al. whole_archive_flag_spec= ;; *) # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else whole_archive_flag_spec= fi ;; esac fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) allow_undefined_flag=unsupported always_export_symbols=yes archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. hardcode_minus_L=yes if test "$GCC" = yes && test -z "$link_static_flag"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. hardcode_direct=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. hardcode_direct=yes archive_cmds='' hardcode_libdir_separator=':' if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 hardcode_direct=yes else # We have old collect2 hardcode_direct=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking hardcode_minus_L=yes hardcode_libdir_flag_spec='-L$libdir' hardcode_libdir_separator= fi esac shared_flag='-shared' else # not using gcc if test "$host_cpu" = ia64; then shared_flag='${wl}-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall can do strange things, so it is better to # generate a list of symbols to export. always_export_symbols=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. allow_undefined_flag='-berok' hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' allow_undefined_flag="-z nodefs" archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" else hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. allow_undefined_flag='${wl}-berok' # This is a bit strange, but is similar to how AIX traditionally builds # it's shared libraries. archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname' fi fi ;; amigaos*) archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes # see comment about different semantics on the GNU ld section ld_shlibs=no ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # FIXME: Setting linknames here is a bad hack. archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. old_archive_from_new_cmds='true' # FIXME: Should let the user specify the lib program. old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' fix_srcfile_path='`cygpath -w "$srcfile"`' ;; darwin* | rhapsody*) case "$host_os" in rhapsody* | darwin1.[[012]]) allow_undefined_flag='-undefined suppress' ;; *) # Darwin 1.3 on allow_undefined_flag='-flat_namespace -undefined suppress' ;; esac # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. archive_cmds='$nonopt $(test "x$module" = xyes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linker_flags -install_name $rpath/$soname $verstring' # We need to add '_' to the symbols in $export_symbols first #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' hardcode_direct=yes hardcode_shlibpath_var=no whole_archive_flag_spec='-all_load $convenience' ;; freebsd1*) ld_shlibs=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd*) archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; hpux9* | hpux10* | hpux11*) case $host_os in hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; esac hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_minus_L=yes # Not in the search PATH, but as the default # location of the library. export_dynamic_flag_spec='${wl}-E' ;; irix5* | irix6*) if test "$GCC" = yes; then archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: link_all_deplibs=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi hardcode_libdir_flag_spec='-R$libdir' hardcode_direct=yes hardcode_shlibpath_var=no ;; newsos6) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: hardcode_shlibpath_var=no ;; openbsd*) hardcode_direct=yes hardcode_shlibpath_var=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' export_dynamic_flag_spec='${wl}-E' else case "$host_os" in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-R$libdir' ;; *) archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ;; esac fi ;; os2*) hardcode_libdir_flag_spec='-L$libdir' hardcode_minus_L=yes allow_undefined_flag=unsupported archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' hardcode_libdir_separator=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' else allow_undefined_flag=' -expect_unresolved \*' archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' #Both c and cxx compiler support -rpath directly hardcode_libdir_flag_spec='-rpath $libdir' fi hardcode_libdir_separator=: ;; sco3.2v5*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes export_dynamic_flag_spec='${wl}-Bexport' ;; solaris*) # gcc --version < 3.0 without binutils cannot create self contained # shared libraries reliably, requiring libgcc.a to resolve some of # the object symbols generated in some cases. Libraries that use # assert need libgcc.a to resolve __eprintf, for example. Linking # a copy of libgcc.a into every shared library to guarantee resolving # such symbols causes other problems: According to Tim Van Holder # , C++ libraries end up with a separate # (to the application) exception stack for one thing. no_undefined_flag=' -z defs' if test "$GCC" = yes; then case `$CC --version 2>/dev/null` in [[12]].*) cat <&2 *** Warning: Releases of GCC earlier than version 3.0 cannot reliably *** create self contained shared libraries on Solaris systems, without *** introducing a dependency on libgcc.a. Therefore, libtool is disabling *** -no-undefined support, which will at least allow you to build shared *** libraries. However, you may find that when you link such libraries *** into an application without using GCC, you have to manually add *** \`gcc --print-libgcc-file-name\` to the link command. We urge you to *** upgrade to a newer version of GCC. Another option is to rebuild your *** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. EOF no_undefined_flag= ;; esac fi # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec='-R$libdir' hardcode_shlibpath_var=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # Supported since Solaris 2.6 (maybe 2.5.1?) whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; esac link_all_deplibs=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi hardcode_libdir_flag_spec='-L$libdir' hardcode_direct=yes hardcode_minus_L=yes hardcode_shlibpath_var=no ;; sysv4) if test "x$host_vendor" = xsno; then archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes # is this really true??? else archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=no #Motorola manual says yes, but my tests say they lie fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; sysv4.3*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no export_dynamic_flag_spec='-Bexport' ;; sysv5*) no_undefined_flag=' -z text' # $CC -shared without GNU ld will not create a library from C++ # object files and a static libstdc++, better avoid it by now archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' hardcode_libdir_flag_spec= hardcode_shlibpath_var=no runpath_var='LD_RUN_PATH' ;; uts4*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; dgux*) archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_libdir_flag_spec='-L$libdir' hardcode_shlibpath_var=no ;; sysv4*MP*) if test -d /usr/nec; then archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' hardcode_shlibpath_var=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes ld_shlibs=yes fi ;; sysv4.2uw2*) archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=no hardcode_shlibpath_var=no hardcode_runpath_var=yes runpath_var=LD_RUN_PATH ;; sysv5uw7* | unixware7*) no_undefined_flag='${wl}-z ${wl}text' if test "$GCC" = yes; then archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' else archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' fi runpath_var='LD_RUN_PATH' hardcode_shlibpath_var=no ;; *) ld_shlibs=no ;; esac fi AC_MSG_RESULT([$ld_shlibs]) test "$ld_shlibs" = no && can_build_shared=no # Check hardcoding attributes. AC_MSG_CHECKING([how to hardcode library paths into programs]) hardcode_action= if test -n "$hardcode_libdir_flag_spec" || \ test -n "$runpath_var"; then # We can hardcode non-existant directories. if test "$hardcode_direct" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$hardcode_shlibpath_var" != no && test "$hardcode_minus_L" != no; then # Linking always hardcodes the temporary library directory. hardcode_action=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. hardcode_action=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. hardcode_action=unsupported fi AC_MSG_RESULT([$hardcode_action]) striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi reload_cmds='$LD$reload_flag -o $output$reload_objs' test -z "$deplibs_check_method" && deplibs_check_method=unknown # PORTME Fill in your ld.so characteristics AC_MSG_CHECKING([dynamic linker characteristics]) library_names_spec= libname_spec='lib$name' soname_spec= postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}.so$versuffix $libname.a' shlibpath_var=LIBPATH # AIX has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}.so$major' ;; aix4* | aix5*) version_type=linux if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can # not hardcode correct soname into executable. Probably we can # add versioning support to collect2, so additional links can # be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}.so$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' ;; beos*) library_names_spec='${libname}.so' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi4*) version_type=linux need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" export_dynamic_flag_spec=-rdynamic # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin*) library_names_spec='$libname.dll.a' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog .libs/$dlname \$dldir/$dlname' postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' ;; yes,mingw*) library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"` ;; yes,pw32*) library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' ;; *) library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no # FIXME: Relying on posixy $() will cause problems for # cross-compilation, but unfortunately the echo tests do not # yet detect zsh echo's removal of \ escapes. library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd*) objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; *) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. dynamic_linker="$host_os dld.sl" version_type=sunos need_lib_prefix=no need_version=no shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' soname_spec='${libname}${release}.sl$major' # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; irix5* | irix6*) version_type=irix need_lib_prefix=no need_version=no soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' case $host_os in irix5*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ;; # No shared lib support for Linux oldld, aout, or coff. linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) dynamic_linker=no ;; # This must be Linux ELF. linux-gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' soname_spec='${libname}${release}.so$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos need_lib_prefix=no need_version=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case "$host_os" in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH ;; os2*) libname_spec='$name' need_lib_prefix=no library_names_spec='$libname.dll $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_version=no soname_spec='${libname}${release}.so' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; sco3.2v5*) version_type=osf soname_spec='${libname}${release}.so$major' library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' shlibpath_var=LD_LIBRARY_PATH ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; uts4*) version_type=linux library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' soname_spec='${libname}${release}.so$major' shlibpath_var=LD_LIBRARY_PATH ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' soname_spec='$libname.so.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no # Report the final consequences. AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case "$host_os" in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix4*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) if test "$hardcode_action" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi AC_LIBTOOL_DLOPEN_SELF if test "$enable_shared" = yes && test "$GCC" = yes; then case $archive_cmds in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_MSG_CHECKING([whether -lc should be explicitly linked in]) AC_CACHE_VAL([lt_cv_archive_cmds_need_lc], [$rm conftest* echo 'static int dummy;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$lt_cv_prog_cc_wl compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest save_allow_undefined_flag=$allow_undefined_flag allow_undefined_flag= if AC_TRY_EVAL(archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) then lt_cv_archive_cmds_need_lc=no else lt_cv_archive_cmds_need_lc=yes fi allow_undefined_flag=$save_allow_undefined_flag else cat conftest.err 1>&5 fi]) AC_MSG_RESULT([$lt_cv_archive_cmds_need_lc]) ;; esac fi need_lc=${lt_cv_archive_cmds_need_lc-yes} # The second clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then : else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. test -f Makefile && make "$ltmain" fi if test -f "$ltmain"; then trap "$rm \"${ofile}T\"; exit 1" 1 2 15 $rm -f "${ofile}T" echo creating $ofile # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS \ AR AR_FLAGS CC LD LN_S NM SHELL \ reload_flag reload_cmds wl \ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ thread_safe_flag_spec whole_archive_flag_spec libname_spec \ library_names_spec soname_spec \ RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ old_striplib striplib file_magic_cmd export_symbols_cmds \ deplibs_check_method allow_undefined_flag no_undefined_flag \ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ global_symbol_to_c_name_address \ hardcode_libdir_flag_spec hardcode_libdir_separator \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do case $var in reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ postinstall_cmds | postuninstall_cmds | \ finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done cat <<__EOF__ > "${ofile}T" #! $SHELL # `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996-2000 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="sed -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi # ### BEGIN LIBTOOL CONFIG # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$need_lc # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # The default C compiler. CC=$lt_CC # Is the compiler the GNU C compiler? with_gcc=$GCC # The linker used to build libraries. LD=$lt_LD # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_wl # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_pic_flag pic_mode=$pic_mode # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_compiler_c_o # Can we write directly to a .lo ? compiler_o_lo=$lt_compiler_o_lo # Must we lock files when doing compilation ? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_link_static_flag # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_no_builtin_flag # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_thread_safe_flag_spec # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_old_archive_cmds old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build and install a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that forces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the # resulting binary. hardcode_direct=$hardcode_direct # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path="$fix_srcfile_path" # Set to yes if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # ### END LIBTOOL CONFIG __EOF__ case $host_os in aix3*) cat <<\EOF >> "${ofile}T" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac case $host_os in cygwin* | mingw* | pw32* | os2*) cat <<'EOF' >> "${ofile}T" # This is a source program that is used to create dlls on Windows # Don't remove nor modify the starting and closing comments # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ # This is a source program that is used to create import libraries # on Windows for dlls which lack them. Don't remove nor modify the # starting and closing comments # /* impgen.c starts here */ # /* Copyright (C) 1999-2000 Free Software Foundation, Inc. # # This file is part of GNU libtool. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # */ # # #include /* for printf() */ # #include /* for open(), lseek(), read() */ # #include /* for O_RDONLY, O_BINARY */ # #include /* for strdup() */ # # /* O_BINARY isn't required (or even defined sometimes) under Unix */ # #ifndef O_BINARY # #define O_BINARY 0 # #endif # # static unsigned int # pe_get16 (fd, offset) # int fd; # int offset; # { # unsigned char b[2]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 2); # return b[0] + (b[1]<<8); # } # # static unsigned int # pe_get32 (fd, offset) # int fd; # int offset; # { # unsigned char b[4]; # lseek (fd, offset, SEEK_SET); # read (fd, b, 4); # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # static unsigned int # pe_as32 (ptr) # void *ptr; # { # unsigned char *b = ptr; # return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); # } # # int # main (argc, argv) # int argc; # char *argv[]; # { # int dll; # unsigned long pe_header_offset, opthdr_ofs, num_entries, i; # unsigned long export_rva, export_size, nsections, secptr, expptr; # unsigned long name_rvas, nexp; # unsigned char *expdata, *erva; # char *filename, *dll_name; # # filename = argv[1]; # # dll = open(filename, O_RDONLY|O_BINARY); # if (dll < 1) # return 1; # # dll_name = filename; # # for (i=0; filename[i]; i++) # if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') # dll_name = filename + i +1; # # pe_header_offset = pe_get32 (dll, 0x3c); # opthdr_ofs = pe_header_offset + 4 + 20; # num_entries = pe_get32 (dll, opthdr_ofs + 92); # # if (num_entries < 1) /* no exports */ # return 1; # # export_rva = pe_get32 (dll, opthdr_ofs + 96); # export_size = pe_get32 (dll, opthdr_ofs + 100); # nsections = pe_get16 (dll, pe_header_offset + 4 +2); # secptr = (pe_header_offset + 4 + 20 + # pe_get16 (dll, pe_header_offset + 4 + 16)); # # expptr = 0; # for (i = 0; i < nsections; i++) # { # char sname[8]; # unsigned long secptr1 = secptr + 40 * i; # unsigned long vaddr = pe_get32 (dll, secptr1 + 12); # unsigned long vsize = pe_get32 (dll, secptr1 + 16); # unsigned long fptr = pe_get32 (dll, secptr1 + 20); # lseek(dll, secptr1, SEEK_SET); # read(dll, sname, 8); # if (vaddr <= export_rva && vaddr+vsize > export_rva) # { # expptr = fptr + (export_rva - vaddr); # if (export_rva + export_size > vaddr + vsize) # export_size = vsize - (export_rva - vaddr); # break; # } # } # # expdata = (unsigned char*)malloc(export_size); # lseek (dll, expptr, SEEK_SET); # read (dll, expdata, export_size); # erva = expdata - export_rva; # # nexp = pe_as32 (expdata+24); # name_rvas = pe_as32 (expdata+32); # # printf ("EXPORTS\n"); # for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) mv -f "${ofile}T" "$ofile" || \ (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") chmod +x "$ofile" fi ])# _LT_AC_LTCONFIG_HACK # AC_LIBTOOL_DLOPEN - enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) # AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) # AC_LIBTOOL_PICMODE - implement the --with-pic flag # Usage: AC_LIBTOOL_PICMODE[(MODE)] # Where MODE is either `yes' or `no'. If omitted, it defaults to # `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default)]) # AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in /*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; ?:/*) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. ;; *) ac_save_MAGIC_CMD="$MAGIC_CMD" IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | egrep "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$ac_save_ifs" MAGIC_CMD="$ac_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ]) # AC_PATH_MAGIC - find a file program which can recognise a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) else MAGIC_CMD=: fi fi ]) # AC_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | [[A-Za-z]]:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else lt_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$lt_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) # AC_PROG_LD_GNU - AC_DEFUN([AC_PROG_LD_GNU], [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then lt_cv_prog_gnu_ld=yes else lt_cv_prog_gnu_ld=no fi]) with_gnu_ld=$lt_cv_prog_gnu_ld ]) # AC_PROG_LD_RELOAD_FLAG - find reload flag for linker # -- PORTME Some linkers may need a different reload flag. AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], [AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, [lt_cv_ld_reload_flag='-r']) reload_flag=$lt_cv_ld_reload_flag test -n "$reload_flag" && reload_flag=" $reload_flag" ]) # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies # -- PORTME fill in with the dynamic library characteristics AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], [AC_CACHE_CHECK([how to recognise dependant libraries], lt_cv_deplibs_check_method, [lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file= lt_cv_deplibs_check_method='unknown' # Need to set the preceding variable on all platforms that support # interlibrary dependencies. # 'none' -- dependencies not supported. # `unknown' -- same as none, but documents that we really don't know. # 'pass_all' -- all dependencies passed with no checks. # 'test_compile' -- check by making test program. # 'file_magic [[regex]]' -- check by looking for files in library path # which responds to the $file_magic_cmd with a given egrep regex. # If you have `file' or equivalent on your system and you're not sure # whether `pass_all' will *always* work, you probably want this one. case $host_os in aix4* | aix5*) lt_cv_deplibs_check_method=pass_all ;; beos*) lt_cv_deplibs_check_method=pass_all ;; bsdi4*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' lt_cv_file_magic_cmd='/usr/bin/file -L' lt_cv_file_magic_test_file=/shlib/libc.so ;; cygwin* | mingw* | pw32*) lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' ;; darwin* | rhapsody*) lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' lt_cv_file_magic_cmd='/usr/bin/file -L' case "$host_os" in rhapsody* | darwin1.[[012]]) lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` ;; *) # Darwin 1.3 on lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' ;; esac ;; freebsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20*|hpux11*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; irix5* | irix6*) case $host_os in irix5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ;; *) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1" ;; esac lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux-gnu*) case $host_cpu in alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* ) lt_cv_deplibs_check_method=pass_all ;; *) # glibc up to 2.1.1 does not perform some relocations on ARM lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; esac lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; openbsd*) lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' else lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' fi ;; osf3* | osf4* | osf5*) # this will be overridden with pass_all, but let us keep it just in case lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' lt_cv_file_magic_test_file=/shlib/libc.so lt_cv_deplibs_check_method=pass_all ;; sco3.2v5*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_test_file=/lib/libc.so ;; sysv5uw[[78]]* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; esac ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method ]) # AC_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. tmp_nm=$ac_dir/${ac_tool_prefix}nm if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then lt_cv_path_NM="$tmp_nm -B" break elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then lt_cv_path_NM="$tmp_nm -p" break else lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32*) # These system don't have libm ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for # the libltdl convenience library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-convenience to the # configure arguments. Note that LIBLTDL and INCLTDL are not # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed # with '${top_builddir}/' and INCLTDL will be prefixed with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for # the libltdl installable library and INCLTDL to the include flags for # the libltdl header and adds --enable-ltdl-install to the configure # arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will # be prefixed with '${top_builddir}/' and INCLTDL will be prefixed # with '${top_srcdir}/' (note the single quotes!). If your package is # not flat and you're not using automake, define top_builddir and # top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" INCLTDL= fi ]) # old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) # This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL]) # Configure paths for GLIB # Owen Taylor 97-11-3 dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or dnl gthread is specified in MODULES, pass to glib-config dnl AC_DEFUN(AM_PATH_GLIB, [dnl dnl Get the cflags and libraries from the glib-config script dnl AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)], glib_config_prefix="$withval", glib_config_prefix="") AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)], glib_config_exec_prefix="$withval", glib_config_exec_prefix="") AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program], , enable_glibtest=yes) if test x$glib_config_exec_prefix != x ; then glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix" if test x${GLIB_CONFIG+set} != xset ; then GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config fi fi if test x$glib_config_prefix != x ; then glib_config_args="$glib_config_args --prefix=$glib_config_prefix" if test x${GLIB_CONFIG+set} != xset ; then GLIB_CONFIG=$glib_config_prefix/bin/glib-config fi fi for module in . $4 do case "$module" in gmodule) glib_config_args="$glib_config_args gmodule" ;; gthread) glib_config_args="$glib_config_args gthread" ;; esac done AC_PATH_PROG(GLIB_CONFIG, glib-config, no) min_glib_version=ifelse([$1], ,0.99.7,$1) AC_MSG_CHECKING(for GLIB - version >= $min_glib_version) no_glib="" if test "$GLIB_CONFIG" = "no" ; then no_glib=yes else GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags` GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs` glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_glibtest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$GLIB_LIBS $LIBS" dnl dnl Now check if the installed GLIB is sufficiently new. (Also sanity dnl checks the results of glib-config to some extent dnl rm -f conf.glibtest AC_TRY_RUN([ #include #include #include int main () { int major, minor, micro; char *tmp_version; system ("touch conf.glibtest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_glib_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_glib_version"); exit(1); } if ((glib_major_version != $glib_config_major_version) || (glib_minor_version != $glib_config_minor_version) || (glib_micro_version != $glib_config_micro_version)) { printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version, glib_major_version, glib_minor_version, glib_micro_version); printf ("*** was found! If glib-config was correct, then it is best\n"); printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n"); printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n"); printf("*** before re-running configure\n"); } else if ((glib_major_version != GLIB_MAJOR_VERSION) || (glib_minor_version != GLIB_MINOR_VERSION) || (glib_micro_version != GLIB_MICRO_VERSION)) { printf("*** GLIB header files (version %d.%d.%d) do not match\n", GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", glib_major_version, glib_minor_version, glib_micro_version); } else { if ((glib_major_version > major) || ((glib_major_version == major) && (glib_minor_version > minor)) || ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n", glib_major_version, glib_minor_version, glib_micro_version); printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GLIB is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the glib-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n"); printf("*** correct copy of glib-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_glib" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$GLIB_CONFIG" = "no" ; then echo "*** The glib-config script installed by GLIB could not be found" echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the GLIB_CONFIG environment variable to the" echo "*** full path to glib-config." else if test -f conf.glibtest ; then : else echo "*** Could not run GLIB test program, checking why..." CFLAGS="$CFLAGS $GLIB_CFLAGS" LIBS="$LIBS $GLIB_LIBS" AC_TRY_LINK([ #include #include ], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GLIB or finding the wrong" echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" echo "***" echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" echo "*** came with the system with the command" echo "***" echo "*** rpm --erase --nodeps gtk gtk-devel" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GLIB was incorrectly installed" echo "*** or that you have moved GLIB since it was installed. In the latter case, you" echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GLIB_CFLAGS="" GLIB_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GLIB_CFLAGS) AC_SUBST(GLIB_LIBS) rm -f conf.glibtest ]) # Configure paths for GTK+ # Owen Taylor 97-11-3 dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]]) dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS dnl AC_DEFUN(AM_PATH_GTK, [dnl dnl Get the cflags and libraries from the gtk-config script dnl AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)], gtk_config_prefix="$withval", gtk_config_prefix="") AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)], gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="") AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program], , enable_gtktest=yes) for module in . $4 do case "$module" in gthread) gtk_config_args="$gtk_config_args gthread" ;; esac done if test x$gtk_config_exec_prefix != x ; then gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix" if test x${GTK_CONFIG+set} != xset ; then GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config fi fi if test x$gtk_config_prefix != x ; then gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix" if test x${GTK_CONFIG+set} != xset ; then GTK_CONFIG=$gtk_config_prefix/bin/gtk-config fi fi AC_PATH_PROG(GTK_CONFIG, gtk-config, no) min_gtk_version=ifelse([$1], ,0.99.7,$1) AC_MSG_CHECKING(for GTK - version >= $min_gtk_version) no_gtk="" if test "$GTK_CONFIG" = "no" ; then no_gtk=yes else GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags` GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs` gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'` gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'` gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \ sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'` if test "x$enable_gtktest" = "xyes" ; then ac_save_CFLAGS="$CFLAGS" ac_save_LIBS="$LIBS" CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$GTK_LIBS $LIBS" dnl dnl Now check if the installed GTK is sufficiently new. (Also sanity dnl checks the results of gtk-config to some extent dnl rm -f conf.gtktest AC_TRY_RUN([ #include #include #include int main () { int major, minor, micro; char *tmp_version; system ("touch conf.gtktest"); /* HP/UX 9 (%@#!) writes to sscanf strings */ tmp_version = g_strdup("$min_gtk_version"); if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) { printf("%s, bad version string\n", "$min_gtk_version"); exit(1); } if ((gtk_major_version != $gtk_config_major_version) || (gtk_minor_version != $gtk_config_minor_version) || (gtk_micro_version != $gtk_config_micro_version)) { printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version, gtk_major_version, gtk_minor_version, gtk_micro_version); printf ("*** was found! If gtk-config was correct, then it is best\n"); printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n"); printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n"); printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n"); printf("*** required on your system.\n"); printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n"); printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n"); printf("*** before re-running configure\n"); } #if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION) else if ((gtk_major_version != GTK_MAJOR_VERSION) || (gtk_minor_version != GTK_MINOR_VERSION) || (gtk_micro_version != GTK_MICRO_VERSION)) { printf("*** GTK+ header files (version %d.%d.%d) do not match\n", GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION); printf("*** library (version %d.%d.%d)\n", gtk_major_version, gtk_minor_version, gtk_micro_version); } #endif /* defined (GTK_MAJOR_VERSION) ... */ else { if ((gtk_major_version > major) || ((gtk_major_version == major) && (gtk_minor_version > minor)) || ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))) { return 0; } else { printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n", gtk_major_version, gtk_minor_version, gtk_micro_version); printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n", major, minor, micro); printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n"); printf("***\n"); printf("*** If you have already installed a sufficiently new version, this error\n"); printf("*** probably means that the wrong copy of the gtk-config shell script is\n"); printf("*** being found. The easiest way to fix this is to remove the old version\n"); printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n"); printf("*** correct copy of gtk-config. (In this case, you will have to\n"); printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n"); printf("*** so that the correct libraries are found at run-time))\n"); } } return 1; } ],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi if test "x$no_gtk" = x ; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$GTK_CONFIG" = "no" ; then echo "*** The gtk-config script installed by GTK could not be found" echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the GTK_CONFIG environment variable to the" echo "*** full path to gtk-config." else if test -f conf.gtktest ; then : else echo "*** Could not run GTK test program, checking why..." CFLAGS="$CFLAGS $GTK_CFLAGS" LIBS="$LIBS $GTK_LIBS" AC_TRY_LINK([ #include #include ], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ], [ echo "*** The test program compiled, but did not run. This usually means" echo "*** that the run-time linker is not finding GTK or finding the wrong" echo "*** version of GTK. If it is not finding GTK, you'll need to set your" echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point" echo "*** to the installed location Also, make sure you have run ldconfig if that" echo "*** is required on your system" echo "***" echo "*** If you have an old version installed, it is best to remove it, although" echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH" echo "***" echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that" echo "*** came with the system with the command" echo "***" echo "*** rpm --erase --nodeps gtk gtk-devel" ], [ echo "*** The test program failed to compile or link. See the file config.log for the" echo "*** exact error that occured. This usually means GTK was incorrectly installed" echo "*** or that you have moved GTK since it was installed. In the latter case, you" echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ]) CFLAGS="$ac_save_CFLAGS" LIBS="$ac_save_LIBS" fi fi GTK_CFLAGS="" GTK_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(GTK_CFLAGS) AC_SUBST(GTK_LIBS) rm -f conf.gtktest ]) # CFLAGS and library paths for XMMS # written 15 December 1999 by Ben Gertzfield dnl Usage: dnl AM_PATH_XMMS([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]]) dnl dnl Example: dnl AM_PATH_XMMS(0.9.5.1, , AC_MSG_ERROR([*** XMMS >= 0.9.5.1 not installed - please install first ***])) dnl dnl Defines XMMS_CFLAGS, XMMS_LIBS, XMMS_DATA_DIR, XMMS_PLUGIN_DIR, dnl XMMS_VISUALIZATION_PLUGIN_DIR, XMMS_INPUT_PLUGIN_DIR, dnl XMMS_OUTPUT_PLUGIN_DIR, XMMS_GENERAL_PLUGIN_DIR, XMMS_EFFECT_PLUGIN_DIR, dnl and XMMS_VERSION for your plugin pleasure. dnl dnl XMMS_TEST_VERSION(AVAILABLE-VERSION, NEEDED-VERSION [, ACTION-IF-OKAY [, ACTION-IF-NOT-OKAY]]) AC_DEFUN(XMMS_TEST_VERSION, [ # Determine which version number is greater. Prints 2 to stdout if # the second number is greater, 1 if the first number is greater, # 0 if the numbers are equal. # Written 15 December 1999 by Ben Gertzfield # Revised 15 December 1999 by Jim Monty AC_PROG_AWK xmms_got_version=[` $AWK ' \ BEGIN { \ print vercmp(ARGV[1], ARGV[2]); \ } \ \ function vercmp(ver1, ver2, ver1arr, ver2arr, \ ver1len, ver2len, \ ver1int, ver2int, len, i, p) { \ \ ver1len = split(ver1, ver1arr, /\./); \ ver2len = split(ver2, ver2arr, /\./); \ \ len = ver1len > ver2len ? ver1len : ver2len; \ \ for (i = 1; i <= len; i++) { \ p = 1000 ^ (len - i); \ ver1int += ver1arr[i] * p; \ ver2int += ver2arr[i] * p; \ } \ \ if (ver1int < ver2int) \ return 2; \ else if (ver1int > ver2int) \ return 1; \ else \ return 0; \ }' $1 $2`] if test $xmms_got_version -eq 2; then # failure ifelse([$4], , :, $4) else # success! ifelse([$3], , :, $3) fi ]) AC_DEFUN(AM_PATH_XMMS, [ AC_ARG_WITH(xmms-prefix,[ --with-xmms-prefix=PFX Prefix where XMMS is installed (optional)], xmms_config_prefix="$withval", xmms_config_prefix="") AC_ARG_WITH(xmms-exec-prefix,[ --with-xmms-exec-prefix=PFX Exec prefix where XMMS is installed (optional)], xmms_config_exec_prefix="$withval", xmms_config_exec_prefix="") if test x$xmms_config_exec_prefix != x; then xmms_config_args="$xmms_config_args --exec-prefix=$xmms_config_exec_prefix" if test x${XMMS_CONFIG+set} != xset; then XMMS_CONFIG=$xmms_config_exec_prefix/bin/xmms-config fi fi if test x$xmms_config_prefix != x; then xmms_config_args="$xmms_config_args --prefix=$xmms_config_prefix" if test x${XMMS_CONFIG+set} != xset; then XMMS_CONFIG=$xmms_config_prefix/bin/xmms-config fi fi AC_PATH_PROG(XMMS_CONFIG, xmms-config, no) min_xmms_version=ifelse([$1], ,0.9.5.1, $1) if test "$XMMS_CONFIG" = "no"; then no_xmms=yes else XMMS_CFLAGS=`$XMMS_CONFIG $xmms_config_args --cflags` XMMS_LIBS=`$XMMS_CONFIG $xmms_config_args --libs` XMMS_VERSION=`$XMMS_CONFIG $xmms_config_args --version` XMMS_DATA_DIR=`$XMMS_CONFIG $xmms_config_args --data-dir` XMMS_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --plugin-dir` XMMS_VISUALIZATION_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args \ --visualization-plugin-dir` XMMS_INPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --input-plugin-dir` XMMS_OUTPUT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --output-plugin-dir` XMMS_EFFECT_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --effect-plugin-dir` XMMS_GENERAL_PLUGIN_DIR=`$XMMS_CONFIG $xmms_config_args --general-plugin-dir` XMMS_TEST_VERSION($XMMS_VERSION, $min_xmms_version, ,no_xmms=version) fi AC_MSG_CHECKING(for XMMS - version >= $min_xmms_version) if test "x$no_xmms" = x; then AC_MSG_RESULT(yes) ifelse([$2], , :, [$2]) else AC_MSG_RESULT(no) if test "$XMMS_CONFIG" = "no" ; then echo "*** The xmms-config script installed by XMMS could not be found." echo "*** If XMMS was installed in PREFIX, make sure PREFIX/bin is in" echo "*** your path, or set the XMMS_CONFIG environment variable to the" echo "*** full path to xmms-config." else if test "$no_xmms" = "version"; then echo "*** An old version of XMMS, $XMMS_VERSION, was found." echo "*** You need a version of XMMS newer than $min_xmms_version." echo "*** The latest version of XMMS is always available from" echo "*** http://www.xmms.org/" echo "***" echo "*** If you have already installed a sufficiently new version, this error" echo "*** probably means that the wrong copy of the xmms-config shell script is" echo "*** being found. The easiest way to fix this is to remove the old version" echo "*** of XMMS, but you can also set the XMMS_CONFIG environment to point to the" echo "*** correct copy of xmms-config. (In this case, you will have to" echo "*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf" echo "*** so that the correct libraries are found at run-time)" fi fi XMMS_CFLAGS="" XMMS_LIBS="" ifelse([$3], , :, [$3]) fi AC_SUBST(XMMS_CFLAGS) AC_SUBST(XMMS_LIBS) AC_SUBST(XMMS_VERSION) AC_SUBST(XMMS_DATA_DIR) AC_SUBST(XMMS_PLUGIN_DIR) AC_SUBST(XMMS_VISUALIZATION_PLUGIN_DIR) AC_SUBST(XMMS_INPUT_PLUGIN_DIR) AC_SUBST(XMMS_OUTPUT_PLUGIN_DIR) AC_SUBST(XMMS_GENERAL_PLUGIN_DIR) AC_SUBST(XMMS_EFFECT_PLUGIN_DIR) ]) btexmms/install-sh0100755000076400007640000001273607543127476013240 0ustar nikenike#!/bin/sh # # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). # # Copyright 1991 by the Massachusetts Institute of Technology # # Permission to use, copy, modify, distribute, and sell this software and its # documentation for any purpose is hereby granted without fee, provided that # the above copyright notice appear in all copies and that both that # copyright notice and this permission notice appear in supporting # documentation, and that the name of M.I.T. not be used in advertising or # publicity pertaining to distribution of the software without specific, # written prior permission. M.I.T. makes no representations about the # suitability of this software for any purpose. It is provided "as is" # without express or implied warranty. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. It can only install one file at a time, a restriction # shared with many OS's install programs. # set DOITPROG to echo to test this script # Don't use :- since 4.3BSD and earlier shells don't like it. doit="${DOITPROG-}" # put in absolute paths if you don't have them in your path; or use env. vars. mvprog="${MVPROG-mv}" cpprog="${CPPROG-cp}" chmodprog="${CHMODPROG-chmod}" chownprog="${CHOWNPROG-chown}" chgrpprog="${CHGRPPROG-chgrp}" stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" transformbasename="" transform_arg="" instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd="" chgrpcmd="" stripcmd="" rmcmd="$rmprog -f" mvcmd="$mvprog" src="" dst="" dir_arg="" while [ x"$1" != x ]; do case $1 in -c) instcmd="$cpprog" shift continue;; -d) dir_arg=true shift continue;; -m) chmodcmd="$chmodprog $2" shift shift continue;; -o) chowncmd="$chownprog $2" shift shift continue;; -g) chgrpcmd="$chgrpprog $2" shift shift continue;; -s) stripcmd="$stripprog" shift continue;; -t=*) transformarg=`echo $1 | sed 's/-t=//'` shift continue;; -b=*) transformbasename=`echo $1 | sed 's/-b=//'` shift continue;; *) if [ x"$src" = x ] then src=$1 else # this colon is to work around a 386BSD /bin/sh bug : dst=$1 fi shift continue;; esac done if [ x"$src" = x ] then echo "install: no input file specified" exit 1 else true fi if [ x"$dir_arg" != x ]; then dst=$src src="" if [ -d $dst ]; then instcmd=: chmodcmd="" else instcmd=mkdir fi else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command # might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f $src -o -d $src ] then true else echo "install: $src does not exist" exit 1 fi if [ x"$dst" = x ] then echo "install: no destination specified" exit 1 else true fi # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic if [ -d $dst ] then dst="$dst"/`basename $src` else true fi fi ## this sed command emulates the dirname command dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script # Skip lots of stat calls in the usual case. if [ ! -d "$dstdir" ]; then defaultIFS=' ' IFS="${IFS-${defaultIFS}}" oIFS="${IFS}" # Some sh's can't handle IFS=/ for some reason. IFS='%' set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` IFS="${oIFS}" pathcomp='' while [ $# -ne 0 ] ; do pathcomp="${pathcomp}${1}" shift if [ ! -d "${pathcomp}" ] ; then $mkdirprog "${pathcomp}" else true fi pathcomp="${pathcomp}/" done fi if [ x"$dir_arg" != x ] then $doit $instcmd $dst && if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi else # If we're going to rename the final executable, determine the name now. if [ x"$transformarg" = x ] then dstfile=`basename $dst` else dstfile=`basename $dst $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename if [ x"$dstfile" = x ] then dstfile=`basename $dst` else true fi # Make a temp file name in the proper directory. dsttmp=$dstdir/#inst.$$# # Move or copy the file name to the temp name $doit $instcmd $src $dsttmp && trap "rm -f ${dsttmp}" 0 && # and set any options; do chmod last to preserve setuid bits # If any of these fail, we abort the whole thing. If we want to # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && # Now rename the file to the real destination. $doit $rmcmd -f $dstdir/$dstfile && $doit $mvcmd $dsttmp $dstdir/$dstfile fi && exit 0 btexmms/mkinstalldirs0100755000076400007640000000132207543127476014027 0ustar nikenike#! /bin/sh # mkinstalldirs --- make directory hierarchy # Author: Noah Friedman # Created: 1993-05-16 # Public domain # $Id: mkinstalldirs,v 1.13 1999/01/05 03:18:55 bje Exp $ errstatus=0 for file do set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` shift pathcomp= for d do pathcomp="$pathcomp$d" case "$pathcomp" in -* ) pathcomp=./$pathcomp ;; esac if test ! -d "$pathcomp"; then echo "mkdir $pathcomp" mkdir "$pathcomp" || lasterr=$? if test ! -d "$pathcomp"; then errstatus=$lasterr fi fi pathcomp="$pathcomp/" done done exit $errstatus # mkinstalldirs ends here btexmms/config.guess0100755000076400007640000011315007543127476013544 0ustar nikenike#! /bin/sh # Attempt to guess a canonical system name. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. timestamp='2001-09-04' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Written by Per Bothner . # Please send patches to . # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you # don't specify an explicit build system type. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] Output the configuration name of the system \`$me' is run on. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" >&2 exit 1 ;; * ) break ;; esac done if test $# != 0; then echo "$me: too many arguments$help" >&2 exit 1 fi dummy=dummy-$$ trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 # CC_FOR_BUILD -- compiler used by this script. # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in ,,) echo "int dummy(){}" > $dummy.c ; for c in cc gcc c89 ; do ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; if test $? = 0 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; rm -f $dummy.c $dummy.o $dummy.rel ; if test x"$CC_FOR_BUILD" = x ; then CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; esac' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) # Netbsd (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. # Determine the machine/vendor (is the vendor relevant). case "${UNAME_MACHINE}" in amiga) machine=m68k-unknown ;; arm32) machine=arm-unknown ;; atari*) machine=m68k-atari ;; sun3*) machine=m68k-sun ;; mac68k) machine=m68k-apple ;; macppc) machine=powerpc-apple ;; hp3[0-9][05]) machine=m68k-hp ;; ibmrt|romp-ibm) machine=romp-ibm ;; *) machine=${UNAME_MACHINE}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. case "${UNAME_MACHINE}" in i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k) eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). # Return netbsd for either. FIX? os=netbsd else os=netbsdelf fi ;; *) os=netbsd ;; esac # The OS release release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` fi # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. cat <$dummy.s .data \$Lformat: .byte 37,100,45,37,120,10,0 # "%d-%x\n" .text .globl main .align 4 .ent main main: .frame \$30,16,\$26,0 ldgp \$29,0(\$27) .prologue 1 .long 0x47e03d80 # implver \$0 lda \$2,-1 .long 0x47e20c21 # amask \$2,\$1 lda \$16,\$Lformat mov \$0,\$17 not \$1,\$18 jsr \$26,printf ldgp \$29,0(\$26) mov 0,\$16 jsr \$26,exit .end main EOF eval $set_cc_for_build $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then case `./$dummy` in 0-0) UNAME_MACHINE="alpha" ;; 1-0) UNAME_MACHINE="alphaev5" ;; 1-1) UNAME_MACHINE="alphaev56" ;; 1-101) UNAME_MACHINE="alphapca56" ;; 2-303) UNAME_MACHINE="alphaev6" ;; 2-307) UNAME_MACHINE="alphaev67" ;; 2-1307) UNAME_MACHINE="alphaev68" ;; esac fi rm -f $dummy.s $dummy echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` exit 0 ;; Alpha\ *:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # Should we change UNAME_MACHINE based on the output of uname instead # of the specific Alpha model? echo alpha-pc-interix exit 0 ;; 21064:Windows_NT:50:3) echo alpha-dec-winnt3.5 exit 0 ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit 0;; amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit 0 ;; arc64:OpenBSD:*:*) echo mips64el-unknown-openbsd${UNAME_RELEASE} exit 0 ;; arc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; hkmips:OpenBSD:*:*) echo mips-unknown-openbsd${UNAME_RELEASE} exit 0 ;; pmax:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sgi:OpenBSD:*:*) echo mips-unknown-openbsd${UNAME_RELEASE} exit 0 ;; wgrisc:OpenBSD:*:*) echo mipsel-unknown-openbsd${UNAME_RELEASE} exit 0 ;; *:OS/390:*:*) echo i370-ibm-openedition exit 0 ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. if test "`(/bin/universe) 2>/dev/null`" = att ; then echo pyramid-pyramid-sysv3 else echo pyramid-pyramid-bsd fi exit 0 ;; NILE*:*:*:dcosx) echo pyramid-pyramid-svr4 exit 0 ;; sun4H:SunOS:5.*:*) echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; i86pc:SunOS:5.*:*) echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in Series*|S4*) UNAME_RELEASE=`uname -v` ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` exit 0 ;; sun3*:SunOS:*:*) echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) echo m68k-sun-sunos${UNAME_RELEASE} ;; sun4) echo sparc-sun-sunos${UNAME_RELEASE} ;; esac exit 0 ;; aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; sparc*:NetBSD:*) echo `uname -p`-unknown-netbsd${UNAME_RELEASE} exit 0 ;; atari*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) echo m68k-atari-mint${UNAME_RELEASE} exit 0 ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) echo m68k-milan-mint${UNAME_RELEASE} exit 0 ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) echo m68k-hades-mint${UNAME_RELEASE} exit 0 ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit 0 ;; sun3*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mac68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; mvme88k:OpenBSD:*:*) echo m88k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; RISC*:ULTRIX:*:*) echo mips-dec-ultrix${UNAME_RELEASE} exit 0 ;; VAX*:ULTRIX*:*:*) echo vax-dec-ultrix${UNAME_RELEASE} exit 0 ;; 2020:CLIX:*:* | 2430:CLIX:*:*) echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF $CC_FOR_BUILD $dummy.c -o $dummy \ && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; m88k:CX/UX:7*:*) echo m88k-harris-cxux7 exit 0 ;; m88k:*:4*:R4*) echo m88k-motorola-sysv4 exit 0 ;; m88k:*:3*:R3*) echo m88k-motorola-sysv3 exit 0 ;; AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] then echo m88k-dg-dgux${UNAME_RELEASE} else echo m88k-dg-dguxbcs${UNAME_RELEASE} fi else echo i586-dg-dgux${UNAME_RELEASE} fi exit 0 ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) echo m88k-dolphin-sysv3 exit 0 ;; M88*:*:R3*:*) # Delta 88k system running SVR3 echo m88k-motorola-sysv3 exit 0 ;; XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) echo m88k-tektronix-sysv3 exit 0 ;; Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) echo m68k-tektronix-bsd exit 0 ;; *:IRIX*:*:*) echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` exit 0 ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' i*86:AIX:*:*) echo i386-ibm-aix exit 0 ;; ia64:AIX:*:*) if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include main() { if (!__power_pc()) exit(1); puts("powerpc-ibm-aix3.2.5"); exit(0); } EOF $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then echo rs6000-ibm-aix3.2.4 else echo rs6000-ibm-aix3.2 fi exit 0 ;; *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc fi if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; *:AIX:*:*) echo rs6000-ibm-aix exit 0 ;; ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx exit 0 ;; DPX/2?00:B.O.S.:*:*) echo m68k-bull-sysv3 exit 0 ;; 9000/[34]??:4.3bsd:1.*:*) echo m68k-hp-bsd exit 0 ;; hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) echo m68k-hp-bsd4.4 exit 0 ;; 9000/[34678]??:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) case "${HPUX_REV}" in 11.[0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; esac ;; esac fi ;; esac if [ "${HP_ARCH}" = "" ]; then eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include #include int main () { #if defined(_SC_KERNEL_BITS) long bits = sysconf(_SC_KERNEL_BITS); #endif long cpu = sysconf (_SC_CPU_VERSION); switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0"); break; case CPU_PA_RISC1_1: puts ("hppa1.1"); break; case CPU_PA_RISC2_0: #if defined(_SC_KERNEL_BITS) switch (bits) { case 64: puts ("hppa2.0w"); break; case 32: puts ("hppa2.0n"); break; default: puts ("hppa2.0"); break; } break; #else /* !defined(_SC_KERNEL_BITS) */ puts ("hppa2.0"); break; #endif default: puts ("hppa1.0"); break; } exit (0); } EOF (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi rm -f $dummy.c $dummy fi ;; esac echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; ia64:HP-UX:*:*) HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ia64-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include int main () { long cpu = sysconf (_SC_CPU_VERSION); /* The order matters, because CPU_IS_HP_MC68K erroneously returns true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct results, however. */ if (CPU_IS_PA_RISC (cpu)) { switch (cpu) { case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; default: puts ("hppa-hitachi-hiuxwe2"); break; } } else if (CPU_IS_HP_MC68K (cpu)) puts ("m68k-hitachi-hiuxwe2"); else puts ("unknown-hitachi-hiuxwe2"); exit (0); } EOF $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo unknown-hitachi-hiuxwe2 exit 0 ;; 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) echo hppa1.1-hp-bsd exit 0 ;; 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) echo hppa1.1-hp-osf exit 0 ;; hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else echo ${UNAME_MACHINE}-unknown-osf1 fi exit 0 ;; parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; hppa*:OpenBSD:*:*) echo hppa-unknown-openbsd exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) echo c34-convex-bsd exit 0 ;; C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) echo c38-convex-bsd exit 0 ;; C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; CRAY*X-MP:*:*:*) echo xmp-cray-unicos exit 0 ;; CRAY*Y-MP:*:*:*) echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*T3D:*:*:*) echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*T3E:*:*:*) echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY-2:*:*:*) echo cray2-cray-unicos exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; sparc*:BSD/OS:*:*) echo sparc-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:BSD/OS:*:*) echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit 0 ;; i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we # UNAME_MACHINE based on the output of uname instead of i386? echo i386-pc-interix exit 0 ;; i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit 0 ;; p*:CYGWIN*:*) echo powerpcle-unknown-cygwin exit 0 ;; prep*:SunOS:5.*:*) echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` exit 0 ;; *:GNU:*:*) echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; i*86:Minix:*:*) echo ${UNAME_MACHINE}-pc-minix exit 0 ;; arm*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; mips:Linux:*:*) case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in big) echo mips-unknown-linux-gnu && exit 0 ;; little) echo mipsel-unknown-linux-gnu && exit 0 ;; esac ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit 0 ;; ppc64:Linux:*:*) echo powerpc64-unknown-linux-gnu exit 0 ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in EV5) UNAME_MACHINE=alphaev5 ;; EV56) UNAME_MACHINE=alphaev56 ;; PCA56) UNAME_MACHINE=alphapca56 ;; PCA57) UNAME_MACHINE=alphapca56 ;; EV6) UNAME_MACHINE=alphaev6 ;; EV67) UNAME_MACHINE=alphaev67 ;; EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit 0 ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in PA7*) echo hppa1.1-unknown-linux-gnu ;; PA8*) echo hppa2.0-unknown-linux-gnu ;; *) echo hppa-unknown-linux-gnu ;; esac exit 0 ;; parisc64:Linux:*:* | hppa64:Linux:*:*) echo hppa64-unknown-linux-gnu exit 0 ;; s390:Linux:*:* | s390x:Linux:*:*) echo ${UNAME_MACHINE}-ibm-linux exit 0 ;; sh*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; sparc:Linux:*:* | sparc64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; x86_64:Linux:*:*) echo x86_64-unknown-linux-gnu exit 0 ;; i*86:Linux:*:*) # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. ld_supported_targets=`cd /; ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// s/ .*// p'` case "$ld_supported_targets" in elf32-i386) TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" ;; a.out-i386-linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" exit 0 ;; coff-i386) echo "${UNAME_MACHINE}-pc-linux-gnucoff" exit 0 ;; "") # Either a pre-BFD a.out linker (linux-gnuoldld) or # one that does not give us useful --help. echo "${UNAME_MACHINE}-pc-linux-gnuoldld" exit 0 ;; esac # Determine whether the default compiler is a.out or elf eval $set_cc_for_build cat >$dummy.c < #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { #endif #ifdef __ELF__ # ifdef __GLIBC__ # if __GLIBC__ >= 2 printf ("%s-pc-linux-gnu\n", argv[1]); # else printf ("%s-pc-linux-gnulibc1\n", argv[1]); # endif # else printf ("%s-pc-linux-gnulibc1\n", argv[1]); # endif #else printf ("%s-pc-linux-gnuaout\n", argv[1]); #endif return 0; } EOF $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. # earlier versions are messed up and put the nodename in both # sysname and nodename. echo i386-sequent-sysv4 exit 0 ;; i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} else echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit 0 ;; i*86:*:5:[78]*) case `/bin/uname -X | grep "^Machine"` in *486*) UNAME_MACHINE=i486 ;; *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit 0 ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')` (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486 (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \ && UNAME_MACHINE=i586 (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \ && UNAME_MACHINE=i686 (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 echo ${UNAME_MACHINE}-pc-sco$UNAME_REL else echo ${UNAME_MACHINE}-pc-sysv32 fi exit 0 ;; i*86:*DOS:*:*) echo ${UNAME_MACHINE}-pc-msdosdjgpp exit 0 ;; pc:*:*:*) # Left here for compatibility: # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i386. echo i386-pc-msdosdjgpp exit 0 ;; Intel:Mach:3*:*) echo i386-pc-mach3 exit 0 ;; paragon:*:*:*) echo i860-intel-osf1 exit 0 ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 fi exit 0 ;; mini*:CTIX:SYS*5:*) # "miniframe" echo m68010-convergent-sysv exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4.3${OS_REL} && exit 0 /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit 0 ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) echo powerpc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; RM*:SINIX-*:*:*) echo mips-sni-sysv4 exit 0 ;; *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` echo ${UNAME_MACHINE}-sni-sysv4 else echo ns32k-sni-sysv fi exit 0 ;; PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort # says echo i586-unisys-sysv4 exit 0 ;; *:UNIX_System_V:4*:FTX*) # From Gerald Hewes . # How about differentiating between stratus architectures? -djm echo hppa1.1-stratus-sysv4 exit 0 ;; *:*:*:FTX*) # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit 0 ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit 0 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then echo mips-nec-sysv${UNAME_RELEASE} else echo mips-unknown-sysv${UNAME_RELEASE} fi exit 0 ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. echo powerpc-be-beos exit 0 ;; BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. echo powerpc-apple-beos exit 0 ;; BePC:BeOS:*:*) # BeOS running on Intel PC compatible. echo i586-pc-beos exit 0 ;; SX-4:SUPER-UX:*:*) echo sx4-nec-superux${UNAME_RELEASE} exit 0 ;; SX-5:SUPER-UX:*:*) echo sx5-nec-superux${UNAME_RELEASE} exit 0 ;; Power*:Rhapsody:*:*) echo powerpc-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) echo `uname -p`-apple-darwin${UNAME_RELEASE} exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) if test "${UNAME_MACHINE}" = "x86pc"; then UNAME_MACHINE=pc fi echo `uname -p`-${UNAME_MACHINE}-nto-qnx exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx exit 0 ;; NSR-[KW]:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit 0 ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux exit 0 ;; BS2000:POSIX*:*:*) echo bs2000-siemens-sysv exit 0 ;; DS/*:UNIX_System_V:*:*) echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} exit 0 ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. if test "$cputype" = "386"; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi echo ${UNAME_MACHINE}-unknown-plan9 exit 0 ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. echo ${UNAME_MACHINE}-pc-os2-emx exit 0 ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 exit 0 ;; *:TENEX:*:*) echo pdp10-unknown-tenex exit 0 ;; KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) echo pdp10-dec-tops20 exit 0 ;; XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) echo pdp10-xkl-tops20 exit 0 ;; *:TOPS-20:*:*) echo pdp10-unknown-tops20 exit 0 ;; *:ITS:*:*) echo pdp10-unknown-its exit 0 ;; i*86:XTS-300:*:STOP) echo ${UNAME_MACHINE}-unknown-stop exit 0 ;; i*86:atheos:*:*) echo ${UNAME_MACHINE}-unknown-atheos exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 eval $set_cc_for_build cat >$dummy.c < # include #endif main () { #if defined (sony) #if defined (MIPSEB) /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, I don't know.... */ printf ("mips-sony-bsd\n"); exit (0); #else #include printf ("m68k-sony-newsos%s\n", #ifdef NEWSOS4 "4" #else "" #endif ); exit (0); #endif #endif #if defined (__arm) && defined (__acorn) && defined (__unix) printf ("arm-acorn-riscix"); exit (0); #endif #if defined (hp300) && !defined (hpux) printf ("m68k-hp-bsd\n"); exit (0); #endif #if defined (NeXT) #if !defined (__ARCHITECTURE__) #define __ARCHITECTURE__ "m68k" #endif int version; version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; if (version < 4) printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); else printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); exit (0); #endif #if defined (MULTIMAX) || defined (n16) #if defined (UMAXV) printf ("ns32k-encore-sysv\n"); exit (0); #else #if defined (CMU) printf ("ns32k-encore-mach\n"); exit (0); #else printf ("ns32k-encore-bsd\n"); exit (0); #endif #endif #endif #if defined (__386BSD__) printf ("i386-pc-bsd\n"); exit (0); #endif #if defined (sequent) #if defined (i386) printf ("i386-sequent-dynix\n"); exit (0); #endif #if defined (ns32000) printf ("ns32k-sequent-dynix\n"); exit (0); #endif #endif #if defined (_SEQUENT_) struct utsname un; uname(&un); if (strncmp(un.version, "V2", 2) == 0) { printf ("i386-sequent-ptx2\n"); exit (0); } if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ printf ("i386-sequent-ptx1\n"); exit (0); } printf ("i386-sequent-ptx\n"); exit (0); #endif #if defined (vax) # if !defined (ultrix) # include # if defined (BSD) # if BSD == 43 printf ("vax-dec-bsd4.3\n"); exit (0); # else # if BSD == 199006 printf ("vax-dec-bsd4.3reno\n"); exit (0); # else printf ("vax-dec-bsd\n"); exit (0); # endif # endif # else printf ("vax-dec-bsd\n"); exit (0); # endif # else printf ("vax-dec-ultrix\n"); exit (0); # endif #endif #if defined (alliant) && defined (i860) printf ("i860-alliant-bsd\n"); exit (0); #endif exit (1); } EOF $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy # Apollos put the system type in the environment. test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } # Convex versions that predate uname can use getsysinfo(1) if [ -x /usr/convex/getsysinfo ] then case `getsysinfo -f cpu_type` in c1*) echo c1-convex-bsd exit 0 ;; c2*) if getsysinfo -f scalar_acc then echo c32-convex-bsd else echo c2-convex-bsd fi exit 0 ;; c34*) echo c34-convex-bsd exit 0 ;; c38*) echo c38-convex-bsd exit 0 ;; c4*) echo c4-convex-bsd exit 0 ;; esac fi cat >&2 < in order to provide the needed information to handle your system. config.guess timestamp = $timestamp uname -m = `(uname -m) 2>/dev/null || echo unknown` uname -r = `(uname -r) 2>/dev/null || echo unknown` uname -s = `(uname -s) 2>/dev/null || echo unknown` uname -v = `(uname -v) 2>/dev/null || echo unknown` /usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` /bin/uname -X = `(/bin/uname -X) 2>/dev/null` hostinfo = `(hostinfo) 2>/dev/null` /bin/universe = `(/bin/universe) 2>/dev/null` /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` /bin/arch = `(/bin/arch) 2>/dev/null` /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` UNAME_MACHINE = ${UNAME_MACHINE} UNAME_RELEASE = ${UNAME_RELEASE} UNAME_SYSTEM = ${UNAME_SYSTEM} UNAME_VERSION = ${UNAME_VERSION} EOF exit 1 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: btexmms/config.sub0100755000076400007640000006710007543127476013212 0ustar nikenike#! /bin/sh # Configuration validation subroutine script. # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. timestamp='2001-09-07' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, # Boston, MA 02111-1307, USA. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Please send patches to . # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. # Otherwise, we print the canonical config type on stdout and succeed. # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases # that are meaningful with *any* GNU software. # Each package is responsible for reporting which valid configurations # it does not support. The user should be able to distinguish # a failure to support a valid configuration from a meaningless # configuration. # The goal of this file is to map all the various variations of a given # machine specification into a single specification in the form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM # or in some cases, the newer four-part form: # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. me=`echo "$0" | sed -e 's,.*/,,'` usage="\ Usage: $0 [OPTION] CPU-MFR-OPSYS $0 [OPTION] ALIAS Canonicalize a configuration name. Operation modes: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit Report bugs and patches to ." version="\ GNU config.sub ($timestamp) Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." help=" Try \`$me --help' for more information." # Parse command line while test $# -gt 0 ; do case $1 in --time-stamp | --time* | -t ) echo "$timestamp" ; exit 0 ;; --version | -v ) echo "$version" ; exit 0 ;; --help | --h* | -h ) echo "$usage"; exit 0 ;; -- ) # Stop option processing shift; break ;; - ) # Use stdin as input. break ;; -* ) echo "$me: invalid option $1$help" exit 1 ;; *local*) # First pass through any local machine types. echo $1 exit 0;; * ) break ;; esac done case $# in 0) echo "$me: missing argument$help" >&2 exit 1;; 1) ;; *) echo "$me: too many arguments$help" >&2 exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; *) basic_machine=`echo $1 | sed 's/-[^-]*$//'` if [ $basic_machine != $1 ] then os=`echo $1 | sed 's/.*-/-/'` else os=; fi ;; esac ### Let's recognize common machines as not being operating systems so ### that things like config.sub decstation-3100 work. We also ### recognize some manufacturers as not being operating systems, so we ### can provide default operating systems below. case $os in -sun*os*) # Prevent following clause from handling this invalid input. ;; -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ -apple | -axis) os= basic_machine=$1 ;; -sim | -cisco | -oki | -wec | -winbond) os= basic_machine=$1 ;; -scout) ;; -wrs) os=-vxworks basic_machine=$1 ;; -chorusos*) os=-chorusos basic_machine=$1 ;; -chorusrdb) os=-chorusrdb basic_machine=$1 ;; -hiux*) os=-hiuxwe2 ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -udk*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; -lynx*) os=-lynxos ;; -ptx*) basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` ;; -windowsnt*) os=`echo $os | sed -e 's/windowsnt/winnt/'` ;; -psos*) os=-psos ;; -mint | -mint[0-9]*) basic_machine=m68k-atari os=-mint ;; esac # Decode aliases for certain CPU-COMPANY combinations. case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. 1750a | 580 \ | a29k \ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ | c4x | clipper \ | d10v | d30v | dsp16xx \ | fr30 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | i370 | i860 | i960 | ia64 \ | m32r | m68000 | m68k | m88k | mcore \ | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ | mips64vr4100 | mips64vr4100el | mips64vr4300 \ | mips64vr4300el | mips64vr5000 | mips64vr5000el \ | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ | mipsisa32 \ | mn10200 | mn10300 \ | ns16k | ns32k \ | openrisc \ | pdp10 | pdp11 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ | pyramid \ | s390 | s390x \ | sh | sh[34] | sh[34]eb | shbe | shle \ | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \ | stormy16 | strongarm \ | tahoe | thumb | tic80 | tron \ | v850 \ | we32k \ | x86 | xscale \ | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) # Motorola 68HC11/12. basic_machine=$basic_machine-unknown os=-none ;; m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. *-*-*) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. 580-* \ | a29k-* \ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ | alphapca5[67]-* | arc-* \ | arm-* | armbe-* | armle-* | armv*-* \ | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c54x-* \ | clipper-* | cray2-* | cydra-* \ | d10v-* | d30v-* \ | elxsi-* \ | f30[01]-* | f700-* | fr30-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | i*86-* | i860-* | i960-* | ia64-* \ | m32r-* \ | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \ | m88110-* | m88k-* | mcore-* \ | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ | none-* | np1-* | ns16k-* | ns32k-* \ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ | pyramid-* \ | romp-* | rs6000-* \ | s390-* | s390x-* \ | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \ | sparc-* | sparc64-* | sparc86x-* | sparclite-* \ | sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \ | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ | v850-* | vax-* \ | we32k-* \ | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \ | ymp-* \ | z8k-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) basic_machine=i386-unknown os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) basic_machine=m68000-att ;; 3b*) basic_machine=we32k-att ;; a29khif) basic_machine=a29k-amd os=-udi ;; adobe68k) basic_machine=m68010-adobe os=-scout ;; alliant | fx80) basic_machine=fx80-alliant ;; altos | altos3068) basic_machine=m68k-altos ;; am29k) basic_machine=a29k-none os=-bsd ;; amdahl) basic_machine=580-amdahl os=-sysv ;; amiga | amiga-*) basic_machine=m68k-unknown ;; amigaos | amigados) basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) basic_machine=m68k-unknown os=-sysv4 ;; apollo68) basic_machine=m68k-apollo os=-sysv ;; apollo68bsd) basic_machine=m68k-apollo os=-bsd ;; aux) basic_machine=m68k-apple os=-aux ;; balance) basic_machine=ns32k-sequent os=-dynix ;; convex-c1) basic_machine=c1-convex os=-bsd ;; convex-c2) basic_machine=c2-convex os=-bsd ;; convex-c32) basic_machine=c32-convex os=-bsd ;; convex-c34) basic_machine=c34-convex os=-bsd ;; convex-c38) basic_machine=c38-convex os=-bsd ;; cray | ymp) basic_machine=ymp-cray os=-unicos ;; cray2) basic_machine=cray2-cray os=-unicos ;; [cjt]90) basic_machine=${basic_machine}-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; da30 | da30-*) basic_machine=m68k-da30 ;; decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola ;; delta88) basic_machine=m88k-motorola os=-sysv3 ;; dpx20 | dpx20-*) basic_machine=rs6000-bull os=-bosx ;; dpx2* | dpx2*-bull) basic_machine=m68k-bull os=-sysv3 ;; ebmon29k) basic_machine=a29k-amd os=-ebmon ;; elxsi) basic_machine=elxsi-elxsi os=-bsd ;; encore | umax | mmax) basic_machine=ns32k-encore ;; es1800 | OSE68k | ose68k | ose | OSE) basic_machine=m68k-ericsson os=-ose ;; fx2800) basic_machine=i860-alliant ;; genix) basic_machine=ns32k-ns ;; gmicro) basic_machine=tron-gmicro os=-sysv ;; go32) basic_machine=i386-pc os=-go32 ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; h8300hms) basic_machine=h8300-hitachi os=-hms ;; h8300xray) basic_machine=h8300-hitachi os=-xray ;; h8500hms) basic_machine=h8500-hitachi os=-hms ;; harris) basic_machine=m88k-harris os=-sysv3 ;; hp300-*) basic_machine=m68k-hp ;; hp300bsd) basic_machine=m68k-hp os=-bsd ;; hp300hpux) basic_machine=m68k-hp os=-hpux ;; hp3k9[0-9][0-9] | hp9[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k2[0-9][0-9] | hp9k31[0-9]) basic_machine=m68000-hp ;; hp9k3[2-9][0-9]) basic_machine=m68k-hp ;; hp9k6[0-9][0-9] | hp6[0-9][0-9]) basic_machine=hppa1.0-hp ;; hp9k7[0-79][0-9] | hp7[0-79][0-9]) basic_machine=hppa1.1-hp ;; hp9k78[0-9] | hp78[0-9]) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) # FIXME: really hppa2.0-hp basic_machine=hppa1.1-hp ;; hp9k8[0-9][13679] | hp8[0-9][13679]) basic_machine=hppa1.1-hp ;; hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; hppa-next) os=-nextstep3 ;; hppaosf) basic_machine=hppa1.1-hp os=-osf ;; hppro) basic_machine=hppa1.1-hp os=-proelf ;; i370-ibm* | ibm*) basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; i386-vsta | vsta) basic_machine=i386-unknown os=-vsta ;; iris | iris4d) basic_machine=mips-sgi case $os in -irix*) ;; *) os=-irix4 ;; esac ;; isi68 | isi) basic_machine=m68k-isi os=-sysv ;; m88k-omron*) basic_machine=m88k-omron ;; magnum | m3230) basic_machine=mips-mips os=-sysv ;; merlin) basic_machine=ns32k-utek os=-sysv ;; mingw32) basic_machine=i386-pc os=-mingw32 ;; miniframe) basic_machine=m68000-convergent ;; *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) basic_machine=m68k-atari os=-mint ;; mipsel*-linux*) basic_machine=mipsel-unknown os=-linux-gnu ;; mips*-linux*) basic_machine=mips-unknown os=-linux-gnu ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; mmix*) basic_machine=mmix-knuth os=-mmixware ;; monitor) basic_machine=m68k-rom68k os=-coff ;; msdos) basic_machine=i386-pc os=-msdos ;; mvs) basic_machine=i370-ibm os=-mvs ;; ncr3000) basic_machine=i486-ncr os=-sysv4 ;; netbsd386) basic_machine=i386-unknown os=-netbsd ;; netwinder) basic_machine=armv4l-rebel os=-linux ;; news | news700 | news800 | news900) basic_machine=m68k-sony os=-newsos ;; news1000) basic_machine=m68030-sony os=-newsos ;; news-3600 | risc-news) basic_machine=mips-sony os=-newsos ;; necv70) basic_machine=v70-nec os=-sysv ;; next | m*-next ) basic_machine=m68k-next case $os in -nextstep* ) ;; -ns2*) os=-nextstep2 ;; *) os=-nextstep3 ;; esac ;; nh3000) basic_machine=m68k-harris os=-cxux ;; nh[45]000) basic_machine=m88k-harris os=-cxux ;; nindy960) basic_machine=i960-intel os=-nindy ;; mon960) basic_machine=i960-intel os=-mon960 ;; nonstopux) basic_machine=mips-compaq os=-nonstopux ;; np1) basic_machine=np1-gould ;; nsr-tandem) basic_machine=nsr-tandem ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose ;; os68k) basic_machine=m68k-none os=-os68k ;; pa-hitachi) basic_machine=hppa1.1-hitachi os=-hiuxwe2 ;; paragon) basic_machine=i860-intel os=-osf ;; pbd) basic_machine=sparc-tti ;; pbb) basic_machine=m68k-tti ;; pc532 | pc532-*) basic_machine=ns32k-pc532 ;; pentium | p5 | k5 | k6 | nexgen) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon) basic_machine=i686-pc ;; pentiumii | pentium2) basic_machine=i686-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppcle | powerpclittle | ppc-le | powerpc-little) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ppc64le | powerpc64little | ppc64-le | powerpc64-little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm ;; pw32) basic_machine=i586-unknown os=-pw32 ;; rom68k) basic_machine=m68k-rom68k os=-coff ;; rm[46]00) basic_machine=mips-siemens ;; rtpc | rtpc-*) basic_machine=romp-ibm ;; sa29200) basic_machine=a29k-amd os=-udi ;; sequent) basic_machine=i386-sequent ;; sh) basic_machine=sh-hitachi os=-hms ;; sparclite-wrs) basic_machine=sparclite-wrs os=-vxworks ;; sps7) basic_machine=m68k-bull os=-sysv2 ;; spur) basic_machine=spur-unknown ;; st2000) basic_machine=m68k-tandem ;; stratus) basic_machine=i860-stratus os=-sysv4 ;; sun2) basic_machine=m68000-sun ;; sun2os3) basic_machine=m68000-sun os=-sunos3 ;; sun2os4) basic_machine=m68000-sun os=-sunos4 ;; sun3os3) basic_machine=m68k-sun os=-sunos3 ;; sun3os4) basic_machine=m68k-sun os=-sunos4 ;; sun4os3) basic_machine=sparc-sun os=-sunos3 ;; sun4os4) basic_machine=sparc-sun os=-sunos4 ;; sun4sol2) basic_machine=sparc-sun os=-solaris2 ;; sun3 | sun3-*) basic_machine=m68k-sun ;; sun4) basic_machine=sparc-sun ;; sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; sv1) basic_machine=sv1-cray os=-unicos ;; symmetry) basic_machine=i386-sequent os=-dynix ;; t3e) basic_machine=t3e-cray os=-unicos ;; tic54x | c54x*) basic_machine=tic54x-unknown os=-coff ;; tx39) basic_machine=mipstx39-unknown ;; tx39el) basic_machine=mipstx39el-unknown ;; tower | tower-32) basic_machine=m68k-ncr ;; udi29k) basic_machine=a29k-amd os=-udi ;; ultra3) basic_machine=a29k-nyu os=-sym1 ;; v810 | necv810) basic_machine=v810-nec os=-none ;; vaxv) basic_machine=vax-dec os=-sysv ;; vms) basic_machine=vax-dec os=-vms ;; vpp*|vx|vx-*) basic_machine=f301-fujitsu ;; vxworks960) basic_machine=i960-wrs os=-vxworks ;; vxworks68) basic_machine=m68k-wrs os=-vxworks ;; vxworks29k) basic_machine=a29k-wrs os=-vxworks ;; w65*) basic_machine=w65-wdc os=-none ;; w89k-*) basic_machine=hppa1.1-winbond os=-proelf ;; windows32) basic_machine=i386-pc os=-windows32-msvcrt ;; xmp) basic_machine=xmp-cray os=-unicos ;; xps | xps100) basic_machine=xps100-honeywell ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim ;; none) basic_machine=none-none os=-none ;; # Here we handle the default manufacturer of certain CPU types. It is in # some cases the only manufacturer, in others, it is the most popular. w89k) basic_machine=hppa1.1-winbond ;; op50n) basic_machine=hppa1.1-oki ;; op60c) basic_machine=hppa1.1-oki ;; mips) if [ x$os = x-linux-gnu ]; then basic_machine=mips-unknown else basic_machine=mips-mips fi ;; romp) basic_machine=romp-ibm ;; rs6000) basic_machine=rs6000-ibm ;; vax) basic_machine=vax-dec ;; pdp10) # there are many clones, so DEC is not a safe bet basic_machine=pdp10-unknown ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; sh3 | sh4 | sh3eb | sh4eb) basic_machine=sh-unknown ;; sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) basic_machine=cydra-cydrome ;; orion) basic_machine=orion-highlevel ;; orion105) basic_machine=clipper-highlevel ;; mac | mpw | mac-mpw) basic_machine=m68k-apple ;; pmac | pmac-mpw) basic_machine=powerpc-apple ;; c4x*) basic_machine=c4x-none os=-coff ;; *-unknown) # Make sure to match an already-canonicalized machine name. ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 ;; esac # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` ;; *-commodore*) basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` ;; *) ;; esac # Decode manufacturer-specific aliases for certain operating systems. if [ x"$os" != x"" ] then case $os in # First match some system type aliases # that might get confused with valid system types. # -solaris* is a basic system type, with this one exception. -solaris1 | -solaris1.*) os=`echo $os | sed -e 's|solaris1|sunos4|'` ;; -solaris) os=-solaris2 ;; -svr4*) os=-sysv4 ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; # First accept the basic system types. # The portable systems comes first. # Each alternative MUST END IN A *, to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ | -aos* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) case $basic_machine in x86-* | i*86-*) ;; *) os=-nto$os ;; esac ;; -nto*) os=-nto-qnx ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` ;; -linux*) os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) os=`echo $os | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) os=`echo $os | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition ;; -wince*) os=-wince ;; -osfrose*) os=-osfrose ;; -osf*) os=-osf ;; -utek*) os=-bsd ;; -dynix*) os=-bsd ;; -acis*) os=-aos ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; -ns2 ) os=-nextstep2 ;; -nsk*) os=-nsk ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` ;; -sinix*) os=-sysv4 ;; -triton*) os=-sysv3 ;; -oss*) os=-sysv3 ;; -svr4) os=-sysv4 ;; -svr3) os=-sysv3 ;; -sysvr4) os=-sysv4 ;; # This must come after -sysvr4. -sysv*) ;; -ose*) os=-ose ;; -es1800*) os=-ose ;; -xenix) os=-xenix ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 exit 1 ;; esac else # Here we handle the default operating systems that come with various machines. # The value should be what the vendor currently ships out the door with their # machine or put another way, the most popular os provided with the machine. # Note that if you're going to try to match "-MANUFACTURER" here (say, # "-sun"), then you have to tell the case statement up towards the top # that MANUFACTURER isn't an operating system. Otherwise, code above # will signal an error saying that MANUFACTURER isn't an operating # system, and we'll never get to this point. case $basic_machine in *-acorn) os=-riscix1.2 ;; arm*-rebel) os=-linux ;; arm*-semi) os=-aout ;; pdp10-*) os=-tops20 ;; pdp11-*) os=-none ;; *-dec | vax-*) os=-ultrix4.2 ;; m68*-apollo) os=-domain ;; i386-sun) os=-sunos4.0.2 ;; m68000-sun) os=-sunos3 # This also exists in the configure program, but was not the # default. # os=-sunos4 ;; m68*-cisco) os=-aout ;; mips*-cisco) os=-elf ;; mips*-*) os=-elf ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; sparc-* | *-sun) os=-sunos4.1.1 ;; *-be) os=-beos ;; *-ibm) os=-aix ;; *-wec) os=-proelf ;; *-winbond) os=-proelf ;; *-oki) os=-proelf ;; *-hp) os=-hpux ;; *-hitachi) os=-hiux ;; i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) os=-sysv ;; *-cbm) os=-amigaos ;; *-dg) os=-dgux ;; *-dolphin) os=-sysv3 ;; m68k-ccur) os=-rtu ;; m88k-omron*) os=-luna ;; *-next ) os=-nextstep ;; *-sequent) os=-ptx ;; *-crds) os=-unos ;; *-ns) os=-genix ;; i370-*) os=-mvs ;; *-next) os=-nextstep3 ;; *-gould) os=-sysv ;; *-highlevel) os=-bsd ;; *-encore) os=-bsd ;; *-sgi) os=-irix ;; *-siemens) os=-sysv4 ;; *-masscomp) os=-rtu ;; f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) os=-coff ;; *-*bug) os=-coff ;; *-apple) os=-macos ;; *-atari*) os=-mint ;; *) os=-none ;; esac fi # Here we handle the case where we know the os, and the CPU type, but not the # manufacturer. We pick the logical manufacturer. vendor=unknown case $basic_machine in *-unknown) case $os in -riscix*) vendor=acorn ;; -sunos*) vendor=sun ;; -aix*) vendor=ibm ;; -beos*) vendor=be ;; -hpux*) vendor=hp ;; -mpeix*) vendor=hp ;; -hiux*) vendor=hitachi ;; -unos*) vendor=crds ;; -dgux*) vendor=dg ;; -luna*) vendor=omron ;; -genix*) vendor=ns ;; -mvs* | -opened*) vendor=ibm ;; -ptx*) vendor=sequent ;; -vxsim* | -vxworks*) vendor=wrs ;; -aux*) vendor=apple ;; -hms*) vendor=hitachi ;; -mpw* | -macos*) vendor=apple ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; -vos*) vendor=stratus ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; esac echo $basic_machine$os exit 0 # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" # End: btexmms/ltmain.sh0100644000076400007640000041755607543127476013065 0ustar nikenike# ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell, and then maybe $echo will work. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 fi # Global variables. mode=$default_mode nonopt= prev= prevopt= run= show="$echo" show_help= execute_dlfiles= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" # Parse our command line options once, thoroughly. while test $# -gt 0 do arg="$1" shift case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; *) eval "$prev=\$arg" ;; esac prev= prevopt= continue fi # Have we seen a non-optional argument yet? case $arg in --help) show_help=yes ;; --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" exit 0 ;; --config) sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 exit 0 ;; --debug) echo "$progname: enabling shell trace mode" set -x ;; --dry-run | -n) run=: ;; --features) echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit 0 ;; --finish) mode="finish" ;; --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; --quiet | --silent) show=: ;; -dlopen) prevopt="-dlopen" prev=execute_dlfiles ;; -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 exit 1 ;; *) nonopt="$arg" break ;; esac done if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then case $nonopt in *cc | *++ | gcc* | *-gcc*) mode=link for arg do case $arg in -c) mode=compile break ;; esac done ;; *db | *dbx | *strace | *truss) mode=execute ;; *install*|cp|mv) mode=install ;; *rm) mode=uninstall ;; *) # If we have no mode, but dlfiles were specified, then do execute mode. test -n "$execute_dlfiles" && mode=execute # Just use the default operation mode. if test -z "$mode"; then if test -n "$nonopt"; then $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 else $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 fi fi ;; esac fi # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 exit 1 fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= prev= lastarg= srcfile="$nonopt" suppress_output= user_target=no for arg do case $prev in "") ;; xcompiler) # Aesthetically quote the previous argument. prev= lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac # Add the previous argument to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi continue ;; esac # Accept any command-line options. case $arg in -o) if test "$user_target" != "no"; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 exit 1 fi user_target=next ;; -static) build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; -Xcompiler) prev=xcompiler continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac lastarg="$lastarg $arg" done IFS="$save_ifs" lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` # Add the arguments to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi continue ;; esac case $user_target in next) # The next one is the -o target name user_target=yes continue ;; yes) # We got the output file user_target=set libobj="$arg" continue ;; esac # Accept the current argument as the source file. lastarg="$srcfile" srcfile="$arg" # Aesthetically quote the previous argument. # Backslashify any backslashes, double quotes, and dollar signs. # These are the only characters that are still specially # interpreted inside of double-quoted scrings. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $lastarg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac # Add the previous argument to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi done case $user_target in set) ;; no) # Get the name of the library object. libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; *) $echo "$modename: you must specify a target with \`-o'" 1>&2 exit 1 ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSfmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 exit 1 ;; esac if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 exit 1 fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $libobj" else removelist="$libobj" fi $run $rm $removelist trap "$run $rm $removelist; exit 1" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit 1" 1 2 15 else need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $run ln "$0" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi echo $srcfile > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then # All platforms use -DPIC, to notify preprocessed assembler code. command="$base_compile $srcfile $pic_flag -DPIC" else # Don't build PIC code command="$base_compile $srcfile" fi if test "$build_old_libs" = yes; then lo_libobj="$libobj" dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$libobj"; then dir="$objdir" else dir="$dir/$objdir" fi libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` if test -d "$dir"; then $show "$rm $libobj" $run $rm $libobj else $show "$mkdir $dir" $run $mkdir $dir status=$? if test $status -ne 0 && test ! -d $dir; then exit $status fi fi fi if test "$compiler_o_lo" = yes; then output_obj="$libobj" command="$command -o $output_obj" elif test "$compiler_c_o" = yes; then output_obj="$obj" command="$command -o $output_obj" fi $run $rm "$output_obj" $show "$command" if $run eval "$command"; then : else test -n "$output_obj" && $run $rm $removelist exit 1 fi if test "$need_locks" = warn && test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi # Just move the object if needed, then go on to compile the next one if test x"$output_obj" != x"$libobj"; then $show "$mv $output_obj $libobj" if $run $mv $output_obj $libobj; then : else error=$? $run $rm $removelist exit $error fi fi # If we have no pic_flag, then copy the object into place and finish. if (test -z "$pic_flag" || test "$pic_mode" != default) && test "$build_old_libs" = yes; then # Rename the .lo from within objdir to obj if test -f $obj; then $show $rm $obj $run $rm $obj fi $show "$mv $libobj $obj" if $run $mv $libobj $obj; then : else error=$? $run $rm $removelist exit $error fi xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then xdir="." else xdir="$xdir" fi baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` # Now arrange that obj and lo_libobj become the same file $show "(cd $xdir && $LN_S $baseobj $libobj)" if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then # Unlock the critical section if it was locked if test "$need_locks" != no; then $run $rm "$lockfile" fi exit 0 else error=$? $run $rm $removelist exit $error fi fi # Allow error messages only from the first compilation. suppress_output=' >/dev/null 2>&1' fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $srcfile" else # All platforms use -DPIC, to notify preprocessed assembler code. command="$base_compile $srcfile $pic_flag -DPIC" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" output_obj="$obj" fi # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" $run $rm "$output_obj" $show "$command" if $run eval "$command"; then : else $run $rm $removelist exit 1 fi if test "$need_locks" = warn && test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi # Just move the object if needed if test x"$output_obj" != x"$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else error=$? $run $rm $removelist exit $error fi fi # Create an invalid libtool object if no PIC, so that we do not # accidentally link it into a program. if test "$build_libtool_libs" != yes; then $show "echo timestamp > $libobj" $run eval "echo timestamp > \$libobj" || exit $? else # Move the .lo from within objdir $show "$mv $libobj $lo_libobj" if $run $mv $libobj $lo_libobj; then : else error=$? $run $rm $removelist exit $error fi fi fi # Unlock the critical section if it was locked if test "$need_locks" != no; then $run $rm "$lockfile" fi exit 0 ;; # libtool link mode link | relink) modename="$modename: link" case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invokation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args="$nonopt" compile_command="$nonopt" finalize_command="$nonopt" compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` avoid_version=no dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= # We need to know -static, to get the right output filenames. for arg do case $arg in -all-static | -static) if test "X$arg" = "X-all-static"; then if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi else if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi fi build_libtool_libs=no build_old_libs=yes prefer_static_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test $# -gt 0; do arg="$1" shift case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test ;; *) qarg=$arg ;; esac libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. compile_command="$compile_command @SYMFILE@" finalize_command="$finalize_command @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" if test ! -f "$arg"; then $echo "$modename: symbol file \`$arg' does not exist" exit 1 fi prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit 1 ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= compile_command="$compile_command $wl$qarg" finalize_command="$finalize_command $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n $prev prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" finalize_command="$finalize_command $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 continue ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" exit 1 fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; esac continue ;; -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 exit 1 fi dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-pw32* | *-*-beos*) # These systems don't actually have a C or math library (as such) continue ;; *-*-mingw* | *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" continue ;; -module) module=yes continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # The PATH hackery in wrapper scripts is required on Windows # in order for the loader to find any dlls it needs. $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -o) prev=output ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit 1 ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -static) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Wl,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $wl$flag" linker_flags="$linker_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; *.lo | *.$objext) # A library or standard object. if test "$prev" = dlfiles; then # This file was specified with -dlopen. if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $arg" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` prev= else case $arg in *.lo) libobjs="$libobjs $arg" ;; *) objs="$objs $arg" ;; esac fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi done # argument parsing loop if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` if test "X$output_objdir" = "X$output"; then output_objdir="$objdir" else output_objdir="$output_objdir/$objdir" fi # Create the object directory. if test ! -d "$output_objdir"; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir status=$? if test "$status" -ne 0 && test ! -d "$output_objdir"; then exit $status fi fi # Determine the type of output case $output in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit 1 ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac libs="$libs $deplib" done deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 exit 1 ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do if test "$linkmode" = prog; then # Determine which files to process case $pass in dlopen) libs="$dlfiles" save_deplibs="$deplibs" # Collect dlpreopened libraries deplibs= ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi for deplib in $libs; do lib= found=no case $deplib in -l*) if test "$linkmode" = oldlib && test "$linkmode" = obj; then $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 continue fi if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do # Search the libtool library lib="$searchdir/lib${name}.la" if test -f "$lib"; then found=yes break fi done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi ;; # -l -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi ;; *) $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) if test "$deplibs_check_method" != pass_all; then echo echo "*** Warning: This library needs some functionality provided by $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." else echo echo "*** Warning: Linking the shared library $output against the" echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib'" 1>&2 exit 1 fi # Check to see that this really is a libtool archive. if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." dlname= dlopen= dlpreopen= libdir= library_names= old_library= # If the library was installed with an old release of libtool, # it will not redefine variable installed. installed=yes # Read the .la file case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then # Add dl[pre]opened files of deplib test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit 1 fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 exit 1 fi continue fi # $pass = conv # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit 1 fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 exit 1 fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. dlprefiles="$dlprefiles $lib" else newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 abs_ladir="$ladir" fi ;; esac laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then $echo "$modename: warning: library \`$lib' was moved." 1>&2 dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 exit 1 fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" fi continue fi if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... link_static=no # Whether the deplib will be linked statically if test -n "$library_names" && { test "$prefer_static_libs" = no || test -z "$old_library"; }; then # Link against this shared library if test "$linkmode,$pass" = "prog,link" || { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac if test "$linkmode" = prog; then # We need to hardcode the library path if test -n "$shlibpath_var"; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; *) temp_rpath="$temp_rpath $dir" ;; esac fi fi fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names realname="$2" shift; shift libname=`eval \\$echo \"$libname_spec\"` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin*) major=`expr $current - $age` versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" soname=`echo $soroot | sed -e 's/^.*\///'` newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" save_ifs="$IFS"; IFS='~' eval cmds=\"$extract_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" save_ifs="$IFS"; IFS='~' eval cmds=\"$old_archive_from_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" exit 1 fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && \ test "$hardcode_minus_L" != yes && \ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi # Try to link the static library # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo echo "*** Warning: This library needs some functionality provided by $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** Therefore, libtool will create a static module, that should work " echo "*** as long as the dlopening application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else convenience="$convenience $dir/$old_library" old_convenience="$old_convenience $dir/$old_library" deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do case $deplib in -L*) path="$deplib" ;; *.la) dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$deplib" && dir="." # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" fi ;; esac if grep "^installed=no" $deplib > /dev/null; then path="-L$absdir/$objdir" else eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit 1 fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi path="-L$absdir" fi ;; *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$deplibs $path" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then test "$pass" != scan && dependency_libs="$newdependency_libs" if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do case $deplib in -L*) new_libs="$deplib $new_libs" ;; *) case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi if test "$pass" = "conv" && { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then libs="$deplibs" # reset libs deplibs= fi done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 fi if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 fi # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 exit 1 fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 exit 1 else echo echo "*** Warning: Linking the shared library $output against the non-libtool" echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi if test "$dlself" != no; then $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath if test "$#" -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi install_libdir="$2" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. libext=al oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 fi else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 IFS="$save_ifs" if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 exit 1 fi current="$2" revision="$3" age="$4" # Check that each of the things are valid numbers. case $current in [0-9]*) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac case $revision in [0-9]*) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac case $age in [0-9]*) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac if test "$age" -gt "$current"; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header major=.`expr $current - $age` versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current"; ;; irix) major=`expr $current - $age + 1` verstring="sgi$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` verstring="sgi$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) major=.`expr $current - $age` versuffix="$major.$age.$revision" ;; osf) major=`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. major=`expr $current - $age` versuffix="-$major" ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= verstring="0.0" case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring="" ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi if test "$mode" != relink; then # Remove our outputs. $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. for path in $notinst_path; do lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs -framework System" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd*) # Do not include libc due to us having libc/libc_r. ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behaviour. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $rm conftest.c cat > conftest.c </dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | sed 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ | sed 10q \ | egrep "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done if test -n "$a_deplib" ; then droppeddeps=yes echo echo "*** Warning: This library needs some functionality provided by $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do if eval echo \"$potent_lib\" 2>/dev/null \ | sed 10q \ | egrep "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done if test -n "$a_deplib" ; then droppeddeps=yes echo echo "*** Warning: This library needs some functionality provided by $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | grep . >/dev/null; then echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" echo "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" shift; shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi test -z "$dlname" && dlname=$soname lib="$output_objdir/$realname" for link do linknames="$linknames $link" done # Ensure that we have .o objects for linkers which dislike .lo # (e.g. aix) in case we are running --disable-static for obj in $libobjs; do xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then xdir="." else xdir="$xdir" fi baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` if test ! -f $xdir/$oldobj; then $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? fi done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols eval cmds=\"$export_symbols_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" if test -n "$export_symbols_regex"; then $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "mkdir $gentop" $run mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" for xlib in $convenience; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "mkdir $xdir" $run mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` done fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval cmds=\"$archive_expsym_cmds\" else eval cmds=\"$archive_cmds\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? exit 0 fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 fi if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi case $output in *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit 1 fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $run $rm $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" else gentop="$output_objdir/${obj}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "mkdir $gentop" $run mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" for xlib in $convenience; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "mkdir $xdir" $run mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` done fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" eval cmds=\"$reload_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit 0 fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. $show "echo timestamp > $libobj" $run eval "echo timestamp > $libobj" || exit $? exit 0 fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" eval cmds=\"$reload_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" else # Just create a symlink. $show $rm $libobj $run $rm $libobj xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$libobj"; then xdir="." else xdir="$xdir" fi baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` $show "(cd $xdir && $LN_S $oldobj $baseobj)" $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? fi if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit 0 ;; prog) case $host in *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 fi if test "$preload" = yes; then if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." fi fi case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then dlsyms="${outputname}S.c" else $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 fi fi if test -n "$dlsyms"; then case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${outputname}.nm" $show "$rm $nlist ${nlist}S ${nlist}T" $run $rm "$nlist" "${nlist}S" "${nlist}T" # Parse the name list into a source file. $show "creating $output_objdir/$dlsyms" test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ #ifdef __cplusplus extern \"C\" { #endif /* Prevent the only kind of declaration conflicts we can make. */ #define lt_preloaded_symbols some_other_symbol /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then $show "generating symbol list for \`$output'" test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$output.exp" $run $rm $export_symbols $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' else $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' fi fi for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" name=`echo "$arg" | sed -e 's%^.*/%%'` $run eval 'echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -z "$run"; then # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else echo '/* NONE */' >> "$output_objdir/$dlsyms" fi $echo >> "$output_objdir/$dlsyms" "\ #undef lt_preloaded_symbols #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr address; } lt_preloaded_symbols[] = {\ " eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" $echo >> "$output_objdir/$dlsyms" "\ {0, (lt_ptr) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " fi pic_flag_for_symtable= case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DPIC";; esac esac # Now compile the dynamic symbol file. $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" # Transform the symbol file into the correct name. compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 exit 1 ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. $show "$link_command" $run eval "$link_command" status=$? # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" $run $rm "$output_objdir/${outputname}S.${objext}" fi exit $status fi if test -n "$shlibpath_var"; then # We should set the shlibpath_var rpath= for dir in $temp_rpath; do case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" ;; *) # Relative path: add a thisdir entry. rpath="$rpath\$thisdir/$dir:" ;; esac done temp_rpath="$rpath" fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $run $rm $output # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? exit 0 fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname $show "$link_command" $run eval "$link_command" || exit $? # Now create the wrapper script. $show "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $0 --fallback-echo"; then case $0 in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; *) qecho="$SHELL `pwd`/$0 --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if our run command is non-null. if test -z "$run"; then # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) output=`echo $output|sed 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe ;; *) exeext= ;; esac $rm $output trap "$rm $output; exit 1" 1 2 15 $echo > $output "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then echo=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then # Yippee, \$echo works! : else # Restart under the correct shell, and then maybe \$echo will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $echo >> $output "\ # Find the directory that this script lives in. thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` done # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $mkdir \"\$progdir\" else $rm \"\$progdir/\$file\" fi" echo >> $output "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" exit 1 fi fi $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $rm \"\$progdir/\$program\"; $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } $rm \"\$progdir/\$file\" fi" else echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi echo >> $output "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $echo >> $output "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $echo >> $output "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $echo >> $output "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # win32 systems need to use the prog path for dll # lookup to work *-*-cygwin* | *-*-pw32*) $echo >> $output "\ exec \$progdir/\$program \${1+\"\$@\"} " ;; # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ exec \$progdir\\\\\$program \${1+\"\$@\"} " ;; *) $echo >> $output "\ # Export the path to the program. PATH=\"\$progdir:\$PATH\" export PATH exec \$program \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" exit 1 fi else # The program doesn't exist. \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " chmod +x $output fi exit 0 ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "mkdir $gentop" $run mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" # Add in members from convenience archives. for xlib in $addlibs; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "mkdir $xdir" $run mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` done fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then eval cmds=\"$old_archive_from_new_cmds\" else # Ensure that we have .o objects in place in case we decided # not to build a shared library, and have fallen back to building # static libs even though --disable-static was passed! for oldobj in $oldobjs; do if test ! -f $oldobj; then xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$oldobj"; then xdir="." else xdir="$xdir" fi baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` $show "(cd $xdir && ${LN_S} $obj $baseobj)" $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? fi done eval cmds=\"$old_archive_cmds\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$generated"; then $show "${rm}r$generated" $run ${rm}r$generated fi # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` # Only create the output if not a dry run. if test -z "$run"; then for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit 1 fi newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi newdlfiles="$newdlfiles $libdir/$name" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" fi $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $echo >> $output "\ relink_command=\"$relink_command\"" fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit 0 ;; # libtool install mode install) modename="$modename: install" # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$arg " arg="$1" shift else install_prog= arg="$nonopt" fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$install_prog$arg" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest="$arg" continue fi case $arg in -d) isdir=yes ;; -f) prev="-f" ;; -g) prev="-g" ;; -m) prev="-m" ;; -o) prev="-o" ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest="$arg" continue fi ;; esac # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$install_prog $arg" done if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -z "$files"; then if test -z "$dest"; then $echo "$modename: no file or destination specified" 1>&2 else $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 exit 1 fi # Strip any trailing slash from the destination. dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` test "X$destdir" = "X$dest" && destdir=. destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` # Not a directory, so check to see that there is only one file specified. set dummy $files if test "$#" -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 exit 1 fi fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit 1 fi library_names= old_library= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" if test -n "$relink_command"; then $echo "$modename: warning: relinking \`$file'" 1>&2 $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 continue fi fi # See the names of the shared library. set dummy $library_names if test -n "$2"; then realname="$2" shift shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. $show "$install_prog $dir/$srcname $destdir/$realname" $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$striplib $destdir/$realname" $run eval "$striplib $destdir/$realname" || exit $? fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. for linkname do if test "$linkname" != "$realname"; then $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" fi done fi # Do each command in the postinstall commands. lib="$destdir/$realname" eval cmds=\"$postinstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Install the pseudo-library for information purposes. name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` instname="$dir/$name"i $show "$install_prog $instname $destdir/$name" $run eval "$install_prog $instname $destdir/$name" || exit $? # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; *.$objext) staticdest="$destfile" destfile= ;; *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac # Install the libtool object if requested. if test -n "$destfile"; then $show "$install_prog $file $destfile" $run eval "$install_prog $file $destfile" || exit $? fi # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi exit 0 ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then notinst_deplibs= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 exit 1 fi finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then tmpdir="/tmp" test -n "$TMPDIR" && tmpdir="$TMPDIR" tmpdir=`mktemp -d $tmpdir/libtool-XXXXXX 2> /dev/null` if test $? = 0 ; then : else tmpdir="$tmpdir/libtool-$$" fi if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : else $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 ${rm}r "$tmpdir" continue fi file="$outputname" else $echo "$modename: warning: cannot relink \`$file'" 1>&2 fi else # Install the binary that we compiled earlier. file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyways case $install_prog,$host in /usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) destfile=`echo $destfile | sed -e 's,.exe$,,'` ;; esac ;; esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" ;; esac done for file in $staticlibs; do name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` # Set up the ranlib parameters. oldlib="$destdir/$name" $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? fi # Do each command in the postinstall commands. eval cmds=\"$old_postinstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$future_libdirs"; then $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 fi if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $0 --finish$current_libdirs' else exit 0 fi ;; # libtool finish mode finish) modename="$modename: finish" libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. eval cmds=\"$finish_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds $cmd" done IFS="$save_ifs" fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $run eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. test "$show" = : && exit 0 echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do echo " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" echo "more information, such as the ld(1) and ld.so(8) manual pages." echo "----------------------------------------------------------------------" exit 0 ;; # libtool execute mode execute) modename="$modename: execute" # The first argument is the command name. cmd="$nonopt" if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" exit 1 fi # Handle -dlopen flags immediately. for file in $execute_dlfiles; do if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 exit 1 fi dir= case $file in *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit 1 fi # Read the libtool library. dlname= library_names= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" continue fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 exit 1 fi ;; *.lo) # Just add the directory containing the .lo file. dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. ;; *) $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` args="$args \"$file\"" done if test -z "$run"; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved enviroment variables if test "${save_LC_ALL+set}" = set; then LC_ALL="$save_LC_ALL"; export LC_ALL fi if test "${save_LANG+set}" = set; then LANG="$save_LANG"; export LANG fi # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" $echo "export $shlibpath_var" fi $echo "$cmd$args" exit 0 fi ;; # libtool clean and uninstall mode clean | uninstall) modename="$modename: $mode" rm="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) rm="$rm $arg"; rmforce=yes ;; -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac done if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 exit 1 fi rmdirs= for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. objdir="$objdir" else objdir="$dir/$objdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if (test -L "$file") >/dev/null 2>&1 \ || (test -h "$file") >/dev/null 2>&1 \ || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" if test "$mode" = uninstall; then if test -n "$library_names"; then # Do each command in the postuninstall commands. eval cmds=\"$postuninstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. eval cmds=\"$old_postuninstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. fi fi ;; *.lo) if test "$build_old_libs" = yes; then oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` rmfiles="$rmfiles $dir/$oldobj" fi ;; *) # Do a test to see if this is a libtool program. if test "$mode" = clean && (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then relink_command= . $dir/$file rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi fi ;; esac $show "$rm $rmfiles" $run $rm $rmfiles || exit_status=1 done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then $show "rmdir $dir" $run rmdir $dir >/dev/null 2>&1 fi done exit $exit_status ;; "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 exit 1 ;; esac if test -z "$exec_cmd"; then $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 exit 1 fi fi # test -z "$show_help" if test -n "$exec_cmd"; then eval exec $exec_cmd exit 1 fi # We need to display help for each of the modes. case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... Provide generalized library-building support services. --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information and exit --finish same as \`--mode=finish' --help display this help message and exit --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages --version print version information MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for a more detailed description of MODE." exit 0 ;; clean) $echo \ "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -prefer-pic try to building PIC objects only -prefer-non-pic try to building non-PIC objects only -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $echo \ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $echo \ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $echo \ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $echo \ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -static do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $echo \ "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac echo $echo "Try \`$modename --help' for more information about other modes." exit 0 # Local Variables: # mode:shell-script # sh-indentation:2 # End: btexmms/config.status0100775000076400007640000001514107543647536013750 0ustar nikenike#! /bin/sh # Generated automatically by configure. # Run this file to recreate the current configuration. # This directory was configured as follows, # on host lyola: # # ./configure # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]" for ac_option do case "$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion" exec ${CONFIG_SHELL-/bin/sh} ./configure --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "./config.status generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "$ac_cs_usage"; exit 0 ;; *) echo "$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=. ac_given_INSTALL="/usr/bin/install -c" trap 'rm -fr Makefile src/Makefile conftest*; exit 1' 1 2 15 # Protect against being on the right side of a sed subst in config.status. sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\&%]/\\&/g; s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF /^[ ]*VPATH[ ]*=[^:]*$/d s%@SHELL@%/bin/sh%g s%@CFLAGS@%-g -O2 -Wall -D_REENTRANT -I/usr/lib/glib/include -I/usr/X11R6/include%g s%@CPPFLAGS@%%g s%@CXXFLAGS@%%g s%@FFLAGS@%%g s%@DEFS@% -DPACKAGE=\"btexmms\" -DVERSION=\"0.4\" -DHAVE_DLFCN_H=1 %g s%@LDFLAGS@%%g s%@LIBS@%%g s%@exec_prefix@%${prefix}%g s%@prefix@%/usr/local%g s%@program_transform_name@%s,x,x,%g s%@bindir@%${exec_prefix}/bin%g s%@sbindir@%${exec_prefix}/sbin%g s%@libexecdir@%${exec_prefix}/libexec%g s%@datadir@%${prefix}/share%g s%@sysconfdir@%${prefix}/etc%g s%@sharedstatedir@%${prefix}/com%g s%@localstatedir@%${prefix}/var%g s%@libdir@%${exec_prefix}/lib%g s%@includedir@%${prefix}/include%g s%@oldincludedir@%/usr/include%g s%@infodir@%${prefix}/info%g s%@mandir@%${prefix}/man%g s%@INSTALL_PROGRAM@%${INSTALL}%g s%@INSTALL_SCRIPT@%${INSTALL_PROGRAM}%g s%@INSTALL_DATA@%${INSTALL} -m 644%g s%@PACKAGE@%btexmms%g s%@VERSION@%0.4%g s%@ACLOCAL@%aclocal%g s%@AUTOCONF@%autoconf%g s%@AUTOMAKE@%automake%g s%@AUTOHEADER@%autoheader%g s%@MAKEINFO@%makeinfo%g s%@SET_MAKE@%%g s%@CC@%gcc%g s%@host@%i586-pc-linux-gnu%g s%@host_alias@%i586-pc-linux-gnu%g s%@host_cpu@%i586%g s%@host_vendor@%pc%g s%@host_os@%linux-gnu%g s%@build@%i586-pc-linux-gnu%g s%@build_alias@%i586-pc-linux-gnu%g s%@build_cpu@%i586%g s%@build_vendor@%pc%g s%@build_os@%linux-gnu%g s%@LN_S@%ln -s%g s%@OBJEXT@%o%g s%@EXEEXT@%%g s%@ECHO@%echo%g s%@RANLIB@%ranlib%g s%@STRIP@%strip%g s%@CPP@%gcc -E%g s%@LIBTOOL@%$(SHELL) $(top_builddir)/libtool%g s%@GLIB_CONFIG@%/usr/bin/glib-config%g s%@GLIB_CFLAGS@%-I/usr/lib/glib/include%g s%@GLIB_LIBS@%-L/usr/lib -lglib%g s%@GTK_CONFIG@%/usr/bin/gtk-config%g s%@GTK_CFLAGS@%-I/usr/lib/glib/include -I/usr/X11R6/include%g s%@GTK_LIBS@%-L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm%g s%@XMMS_CONFIG@%/usr/local/bin/xmms-config%g s%@AWK@%gawk%g s%@XMMS_CFLAGS@%-I/usr/local/include -I/usr/local/include/xmms -I/usr/lib/glib/include -I/usr/X11R6/include%g s%@XMMS_LIBS@%-L/usr/local/lib -L/usr/lib -L/usr/X11R6/lib -lgtk -lgdk -rdynamic -lgmodule -lglib -ldl -lXi -lXext -lX11 -lm -lxmms%g s%@XMMS_VERSION@%1.2.7%g s%@XMMS_DATA_DIR@%/usr/local/share/xmms%g s%@XMMS_PLUGIN_DIR@%/usr/local/lib/xmms%g s%@XMMS_VISUALIZATION_PLUGIN_DIR@%/usr/local/lib/xmms/Visualization%g s%@XMMS_INPUT_PLUGIN_DIR@%/usr/local/lib/xmms/Input%g s%@XMMS_OUTPUT_PLUGIN_DIR@%/usr/local/lib/xmms/Output%g s%@XMMS_GENERAL_PLUGIN_DIR@%/usr/local/lib/xmms/General%g s%@XMMS_EFFECT_PLUGIN_DIR@%/usr/local/lib/xmms/Effect%g s%@plugindir@%/usr/local/lib/xmms/Input%g CEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi CONFIG_FILES=${CONFIG_FILES-"Makefile src/Makefile "} for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* exit 0 btexmms/libtool0100775000076400007640000044075207543647533012634 0ustar nikenike#! /bin/sh # libtool - Provide generalized library-building support services. # Generated automatically by (GNU btexmms 0.4) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996-2000 Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="sed -e s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi # ### BEGIN LIBTOOL CONFIG # Libtool was configured on host lyola: # Shell to use when invoking shell scripts. SHELL="/bin/sh" # Whether or not to build shared libraries. build_libtool_libs=yes # Whether or not to build static libraries. build_old_libs=yes # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=no # Whether or not to optimize for fast installation. fast_install=yes # The host system. host_alias=i586-pc-linux-gnu host=i586-pc-linux-gnu # An echo program that does not interpret backslashes. echo="echo" # The archiver. AR="ar" AR_FLAGS="cru" # The default C compiler. CC="gcc" # Is the compiler the GNU C compiler? with_gcc=yes # The linker used to build libraries. LD="/usr/bin/ld" # Whether we need hard or soft links. LN_S="ln -s" # A BSD-compatible nm program. NM="/usr/bin/nm -B" # A symbol stripping program STRIP=strip # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=file # Used on cygwin: DLL creation program. DLLTOOL="dlltool" # Used on cygwin: object dumper. OBJDUMP="objdump" # Used on cygwin: assembler. AS="as" # The name of the directory that contains temporary libtool files. objdir=.libs # How to create reloadable object files. reload_flag=" -r" reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs" # How to pass a linker flag through the compiler. wl="-Wl," # Object file suffix (normally "o"). objext="o" # Old archive suffix (normally "a"). libext="a" # Executable file suffix (normally ""). exeext="" # Additional compiler flags for building library objects. pic_flag=" -fPIC" pic_mode=default # Does compiler simultaneously support -c and -o options? compiler_c_o="yes" # Can we write directly to a .lo ? compiler_o_lo="yes" # Must we lock files when doing compilation ? need_locks="no" # Do we need the lib prefix for modules? need_lib_prefix=no # Do we need a version for libraries? need_version=no # Whether dlopen is supported. dlopen_support=unknown # Whether dlopen of programs is supported. dlopen_self=unknown # Whether dlopen of statically linked programs is supported. dlopen_self_static=unknown # Compiler flag to prevent dynamic linking. link_static_flag="-static" # Compiler flag to turn off builtin functions. no_builtin_flag=" -fno-builtin -fno-rtti -fno-exceptions" # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec="\${wl}--export-dynamic" # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive" # Compiler flag to generate thread-safe objects. thread_safe_flag_spec="" # Library versioning type. version_type=linux # Format of library name prefix. libname_spec="lib\$name" # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so" # The coded name of the library, if different from the real name. soname_spec="\${libname}\${release}.so\$major" # Commands used to build and install an old-style archive. RANLIB="ranlib" old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib" old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib" old_postuninstall_cmds="" # Create an old-style archive from a shared archive. old_archive_from_new_cmds="" # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds="" # Commands used to build and install a shared archive. archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib" archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib" postinstall_cmds="" postuninstall_cmds="" # Commands to strip libraries. old_striplib="strip --strip-debug" striplib="strip --strip-unneeded" # Method to check whether dependent libraries are shared objects. deplibs_check_method="pass_all" # Command to use when deplibs_check_method == file_magic. file_magic_cmd="\$MAGIC_CMD" # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag="" # Flag that forces no undefined symbols. no_undefined_flag="" # Commands used to finish a libtool library installation in a directory. finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir" # Same as above, but a single script fragment to be evaled but not shown. finish_eval="" # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGISTW][ABCDGISTW]*\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'" # Transform the output of nm in a proper C declaration global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern char \\1;/p'" # Transform the output of nm in a C name address pair global_symbol_to_c_name_address="sed -n -e 's/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p' -e 's/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'" # This is the shared library runtime path variable. runpath_var=LD_RUN_PATH # This is the shared library path variable. shlibpath_var=LD_LIBRARY_PATH # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=no # How to hardcode a shared library path into an executable. hardcode_action=immediate # Whether we should hardcode library paths into libraries. hardcode_into_libs=yes # Flag to hardcode $libdir into a binary during linking. # This must work even if $libdir does not exist. hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir" # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator="" # Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the # resulting binary. hardcode_direct=no # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=no # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=unsupported # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=unknown # Compile-time system search path for libraries sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" # Run-time system search path for libraries sys_lib_dlsearch_path_spec="/lib /usr/lib" # Fix the shell variable $srcfile for the compiler. fix_srcfile_path="" # Set to yes if exported symbols are required. always_export_symbols=no # The commands to list exported symbols. export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols" # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds="" # Symbols that should not be listed in the preloaded symbols. exclude_expsyms="_GLOBAL_OFFSET_TABLE_" # Symbols that must always be exported. include_expsyms="" # ### END LIBTOOL CONFIG # ltmain.sh - Provide generalized library-building support services. # NOTE: Changing this file will not affect anything until you rerun configure. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # Check that we have a working $echo. if test "X$1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X$1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then # Yippee, $echo works! : else # Restart under the correct shell, and then maybe $echo will work. exec $SHELL "$0" --no-reexec ${1+"$@"} fi if test "X$1" = X--fallback-echo; then # used as fallback echo shift cat <&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 fi # Global variables. mode=$default_mode nonopt= prev= prevopt= run= show="$echo" show_help= execute_dlfiles= lo2o="s/\\.lo\$/.${objext}/" o2lo="s/\\.${objext}\$/.lo/" # Parse our command line options once, thoroughly. while test $# -gt 0 do arg="$1" shift case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; *) eval "$prev=\$arg" ;; esac prev= prevopt= continue fi # Have we seen a non-optional argument yet? case $arg in --help) show_help=yes ;; --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" exit 0 ;; --config) sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 exit 0 ;; --debug) echo "$progname: enabling shell trace mode" set -x ;; --dry-run | -n) run=: ;; --features) echo "host: $host" if test "$build_libtool_libs" = yes; then echo "enable shared libraries" else echo "disable shared libraries" fi if test "$build_old_libs" = yes; then echo "enable static libraries" else echo "disable static libraries" fi exit 0 ;; --finish) mode="finish" ;; --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; --quiet | --silent) show=: ;; -dlopen) prevopt="-dlopen" prev=execute_dlfiles ;; -*) $echo "$modename: unrecognized option \`$arg'" 1>&2 $echo "$help" 1>&2 exit 1 ;; *) nonopt="$arg" break ;; esac done if test -n "$prevopt"; then $echo "$modename: option \`$prevopt' requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi # If this variable is set in any of the actions, the command in it # will be execed at the end. This prevents here-documents from being # left over by shells. exec_cmd= if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then case $nonopt in *cc | *++ | gcc* | *-gcc*) mode=link for arg do case $arg in -c) mode=compile break ;; esac done ;; *db | *dbx | *strace | *truss) mode=execute ;; *install*|cp|mv) mode=install ;; *rm) mode=uninstall ;; *) # If we have no mode, but dlfiles were specified, then do execute mode. test -n "$execute_dlfiles" && mode=execute # Just use the default operation mode. if test -z "$mode"; then if test -n "$nonopt"; then $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 else $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 fi fi ;; esac fi # Only execute mode is allowed to have -dlopen flags. if test -n "$execute_dlfiles" && test "$mode" != execute; then $echo "$modename: unrecognized option \`-dlopen'" 1>&2 $echo "$help" 1>&2 exit 1 fi # Change the help message to a mode-specific one. generic_help="$help" help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= prev= lastarg= srcfile="$nonopt" suppress_output= user_target=no for arg do case $prev in "") ;; xcompiler) # Aesthetically quote the previous argument. prev= lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac # Add the previous argument to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi continue ;; esac # Accept any command-line options. case $arg in -o) if test "$user_target" != "no"; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 exit 1 fi user_target=next ;; -static) build_old_libs=yes continue ;; -prefer-pic) pic_mode=yes continue ;; -prefer-non-pic) pic_mode=no continue ;; -Xcompiler) prev=xcompiler continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac lastarg="$lastarg $arg" done IFS="$save_ifs" lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` # Add the arguments to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi continue ;; esac case $user_target in next) # The next one is the -o target name user_target=yes continue ;; yes) # We got the output file user_target=set libobj="$arg" continue ;; esac # Accept the current argument as the source file. lastarg="$srcfile" srcfile="$arg" # Aesthetically quote the previous argument. # Backslashify any backslashes, double quotes, and dollar signs. # These are the only characters that are still specially # interpreted inside of double-quoted scrings. lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` # Double-quote args containing other shell metacharacters. # Many Bourne shells cannot handle close brackets correctly # in scan sets, so we specify it separately. case $lastarg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac # Add the previous argument to base_compile. if test -z "$base_compile"; then base_compile="$lastarg" else base_compile="$base_compile $lastarg" fi done case $user_target in set) ;; no) # Get the name of the library object. libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ;; *) $echo "$modename: you must specify a target with \`-o'" 1>&2 exit 1 ;; esac # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSfmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 exit 1 ;; esac if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 exit 1 fi # Delete any leftover library objects. if test "$build_old_libs" = yes; then removelist="$obj $libobj" else removelist="$libobj" fi $run $rm $removelist trap "$run $rm $removelist; exit 1" 1 2 15 # On Cygwin there's no "real" PIC flag so we must build both object types case $host_os in cygwin* | mingw* | pw32* | os2*) pic_mode=default ;; esac if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then # non-PIC code in shared libraries is not supported pic_mode=default fi # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit 1" 1 2 15 else need_locks=no lockfile= fi # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then until $run ln "$0" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done elif test "$need_locks" = warn; then if test -f "$lockfile"; then echo "\ *** ERROR, $lockfile exists and contains: `cat $lockfile 2>/dev/null` This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi echo $srcfile > "$lockfile" fi if test -n "$fix_srcfile_path"; then eval srcfile=\"$fix_srcfile_path\" fi # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then # All platforms use -DPIC, to notify preprocessed assembler code. command="$base_compile $srcfile $pic_flag -DPIC" else # Don't build PIC code command="$base_compile $srcfile" fi if test "$build_old_libs" = yes; then lo_libobj="$libobj" dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$libobj"; then dir="$objdir" else dir="$dir/$objdir" fi libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` if test -d "$dir"; then $show "$rm $libobj" $run $rm $libobj else $show "$mkdir $dir" $run $mkdir $dir status=$? if test $status -ne 0 && test ! -d $dir; then exit $status fi fi fi if test "$compiler_o_lo" = yes; then output_obj="$libobj" command="$command -o $output_obj" elif test "$compiler_c_o" = yes; then output_obj="$obj" command="$command -o $output_obj" fi $run $rm "$output_obj" $show "$command" if $run eval "$command"; then : else test -n "$output_obj" && $run $rm $removelist exit 1 fi if test "$need_locks" = warn && test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi # Just move the object if needed, then go on to compile the next one if test x"$output_obj" != x"$libobj"; then $show "$mv $output_obj $libobj" if $run $mv $output_obj $libobj; then : else error=$? $run $rm $removelist exit $error fi fi # If we have no pic_flag, then copy the object into place and finish. if (test -z "$pic_flag" || test "$pic_mode" != default) && test "$build_old_libs" = yes; then # Rename the .lo from within objdir to obj if test -f $obj; then $show $rm $obj $run $rm $obj fi $show "$mv $libobj $obj" if $run $mv $libobj $obj; then : else error=$? $run $rm $removelist exit $error fi xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then xdir="." else xdir="$xdir" fi baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` # Now arrange that obj and lo_libobj become the same file $show "(cd $xdir && $LN_S $baseobj $libobj)" if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then # Unlock the critical section if it was locked if test "$need_locks" != no; then $run $rm "$lockfile" fi exit 0 else error=$? $run $rm $removelist exit $error fi fi # Allow error messages only from the first compilation. suppress_output=' >/dev/null 2>&1' fi # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then if test "$pic_mode" != yes; then # Don't build PIC code command="$base_compile $srcfile" else # All platforms use -DPIC, to notify preprocessed assembler code. command="$base_compile $srcfile $pic_flag -DPIC" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" output_obj="$obj" fi # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" $run $rm "$output_obj" $show "$command" if $run eval "$command"; then : else $run $rm $removelist exit 1 fi if test "$need_locks" = warn && test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then echo "\ *** ERROR, $lockfile contains: `cat $lockfile 2>/dev/null` but it should contain: $srcfile This indicates that another process is trying to use the same temporary object file, and libtool could not work around it because your compiler does not support \`-c' and \`-o' together. If you repeat this compilation, it may succeed, by chance, but you had better avoid parallel builds (make -j) in this platform, or get a better compiler." $run $rm $removelist exit 1 fi # Just move the object if needed if test x"$output_obj" != x"$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else error=$? $run $rm $removelist exit $error fi fi # Create an invalid libtool object if no PIC, so that we do not # accidentally link it into a program. if test "$build_libtool_libs" != yes; then $show "echo timestamp > $libobj" $run eval "echo timestamp > \$libobj" || exit $? else # Move the .lo from within objdir $show "$mv $libobj $lo_libobj" if $run $mv $libobj $lo_libobj; then : else error=$? $run $rm $removelist exit $error fi fi fi # Unlock the critical section if it was locked if test "$need_locks" != no; then $run $rm "$lockfile" fi exit 0 ;; # libtool link mode link | relink) modename="$modename: link" case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra # flag for every libtool invokation. # allow_undefined=no # FIXME: Unfortunately, there are problems with the above when trying # to make a dll which has undefined symbols, in which case not # even a static library is built. For now, we need to specify # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes ;; *) allow_undefined=yes ;; esac libtool_args="$nonopt" compile_command="$nonopt" finalize_command="$nonopt" compile_rpath= finalize_rpath= compile_shlibpath= finalize_shlibpath= convenience= old_convenience= deplibs= old_deplibs= compiler_flags= linker_flags= dllsearchpath= lib_search_path=`pwd` avoid_version=no dlfiles= dlprefiles= dlself=no export_dynamic=no export_symbols= export_symbols_regex= generated= libobjs= ltlibs= module=no no_install=no objs= prefer_static_libs=no preload=no prev= prevarg= release= rpath= xrpath= perm_rpath= temp_rpath= thread_safe=no vinfo= # We need to know -static, to get the right output filenames. for arg do case $arg in -all-static | -static) if test "X$arg" = "X-all-static"; then if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 fi if test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi else if test -z "$pic_flag" && test -n "$link_static_flag"; then dlopen_self=$dlopen_self_static fi fi build_libtool_libs=no build_old_libs=yes prefer_static_libs=yes break ;; esac done # See if our shared archives depend on static archives. test -n "$old_archive_from_new_cmds" && build_old_libs=yes # Go through the arguments, transforming them on the way. while test $# -gt 0; do arg="$1" shift case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test ;; *) qarg=$arg ;; esac libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. compile_command="$compile_command @SYMFILE@" finalize_command="$finalize_command @SYMFILE@" preload=yes fi case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then dlself=needless export_dynamic=yes fi prev= continue ;; self) if test "$prev" = dlprefiles; then dlself=yes elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then dlself=yes else dlself=needless export_dynamic=yes fi prev= continue ;; *) if test "$prev" = dlfiles; then dlfiles="$dlfiles $arg" else dlprefiles="$dlprefiles $arg" fi prev= continue ;; esac ;; expsyms) export_symbols="$arg" if test ! -f "$arg"; then $echo "$modename: symbol file \`$arg' does not exist" exit 1 fi prev= continue ;; expsyms_regex) export_symbols_regex="$arg" prev= continue ;; release) release="-$arg" prev= continue ;; rpath | xrpath) # We need an absolute path. case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit 1 ;; esac if test "$prev" = rpath; then case "$rpath " in *" $arg "*) ;; *) rpath="$rpath $arg" ;; esac else case "$xrpath " in *" $arg "*) ;; *) xrpath="$xrpath $arg" ;; esac fi prev= continue ;; xcompiler) compiler_flags="$compiler_flags $qarg" prev= compile_command="$compile_command $qarg" finalize_command="$finalize_command $qarg" continue ;; xlinker) linker_flags="$linker_flags $qarg" compiler_flags="$compiler_flags $wl$qarg" prev= compile_command="$compile_command $wl$qarg" finalize_command="$finalize_command $wl$qarg" continue ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac fi # test -n $prev prevarg="$arg" case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" finalize_command="$finalize_command $link_static_flag" fi continue ;; -allow-undefined) # FIXME: remove this flag sometime in the future. $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 continue ;; -avoid-version) avoid_version=yes continue ;; -dlopen) prev=dlfiles continue ;; -dlpreopen) prev=dlprefiles continue ;; -export-dynamic) export_dynamic=yes continue ;; -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: more than one -exported-symbols argument is not allowed" exit 1 fi if test "X$arg" = "X-export-symbols"; then prev=expsyms else prev=expsyms_regex fi continue ;; # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in no/*-*-irix*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; esac continue ;; -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 exit 1 fi dir="$absdir" ;; esac case "$deplibs " in *" -L$dir "*) ;; *) deplibs="$deplibs -L$dir" lib_search_path="$lib_search_path $dir" ;; esac case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) case :$dllsearchpath: in *":$dir:"*) ;; *) dllsearchpath="$dllsearchpath:$dir";; esac ;; esac continue ;; -l*) if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then case $host in *-*-cygwin* | *-*-pw32* | *-*-beos*) # These systems don't actually have a C or math library (as such) continue ;; *-*-mingw* | *-*-os2*) # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; *-*-openbsd*) # Do not include libc due to us having libc/libc_r. test "X$arg" = "X-lc" && continue ;; esac elif test "X$arg" = "X-lc_r"; then case $host in *-*-openbsd*) # Do not include libc_r directly, use -pthread flag. continue ;; esac fi deplibs="$deplibs $arg" continue ;; -module) module=yes continue ;; -no-fast-install) fast_install=no continue ;; -no-install) case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # The PATH hackery in wrapper scripts is required on Windows # in order for the loader to find any dlls it needs. $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 fast_install=no ;; *) no_install=yes ;; esac continue ;; -no-undefined) allow_undefined=no continue ;; -o) prev=output ;; -release) prev=release continue ;; -rpath) prev=rpath continue ;; -R) prev=xrpath continue ;; -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 exit 1 ;; esac case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac continue ;; -static) # The effects of -static are defined in a previous loop. # We used to do the same as -all-static on platforms that # didn't have a PIC flag, but the assumption that the effects # would be equivalent was wrong. It would break on at least # Digital Unix and AIX. continue ;; -thread-safe) thread_safe=yes continue ;; -version-info) prev=vinfo continue ;; -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Wl,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` arg= save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") flag="\"$flag\"" ;; esac arg="$arg $wl$flag" compiler_flags="$compiler_flags $wl$flag" linker_flags="$linker_flags $flag" done IFS="$save_ifs" arg=`$echo "X$arg" | $Xsed -e "s/^ //"` ;; -Xcompiler) prev=xcompiler continue ;; -Xlinker) prev=xlinker continue ;; # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; *.lo | *.$objext) # A library or standard object. if test "$prev" = dlfiles; then # This file was specified with -dlopen. if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then dlfiles="$dlfiles $arg" prev= continue else # If libtool objects are unsupported, then we need to preload. prev=dlprefiles fi fi if test "$prev" = dlprefiles; then # Preload the old-style object. dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` prev= else case $arg in *.lo) libobjs="$libobjs $arg" ;; *) objs="$objs $arg" ;; esac fi ;; *.$libext) # An archive. deplibs="$deplibs $arg" old_deplibs="$old_deplibs $arg" continue ;; *.la) # A libtool-controlled library. if test "$prev" = dlfiles; then # This library was specified with -dlopen. dlfiles="$dlfiles $arg" prev= elif test "$prev" = dlprefiles; then # The library was specified with -dlpreopen. dlprefiles="$dlprefiles $arg" prev= else deplibs="$deplibs $arg" fi continue ;; # Some other compiler argument. *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; esac # arg # Now actually substitute the argument into the commands. if test -n "$arg"; then compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi done # argument parsing loop if test -n "$prev"; then $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" if test -n "$shlibpath_var"; then # get the directories listed in $shlibpath_var eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` else shlib_search_path= fi eval sys_lib_search_path=\"$sys_lib_search_path_spec\" eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` if test "X$output_objdir" = "X$output"; then output_objdir="$objdir" else output_objdir="$output_objdir/$objdir" fi # Create the object directory. if test ! -d "$output_objdir"; then $show "$mkdir $output_objdir" $run $mkdir $output_objdir status=$? if test "$status" -ne 0 && test ! -d "$output_objdir"; then exit $status fi fi # Determine the type of output case $output in "") $echo "$modename: you must specify an output file" 1>&2 $echo "$help" 1>&2 exit 1 ;; *.$libext) linkmode=oldlib ;; *.lo | *.$objext) linkmode=obj ;; *.la) linkmode=lib ;; *) linkmode=prog ;; # Anything else should be a program. esac specialdeplibs= libs= # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do case "$libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac libs="$libs $deplib" done deplibs= newdependency_libs= newlib_search_path= need_relink=no # whether we're linking any uninstalled libtool libraries notinst_deplibs= # not-installed libtool libraries notinst_path= # paths that contain not-installed libtool libraries case $linkmode in lib) passes="conv link" for file in $dlfiles $dlprefiles; do case $file in *.la) ;; *) $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 exit 1 ;; esac done ;; prog) compile_deplibs= finalize_deplibs= alldeplibs=no newdlfiles= newdlprefiles= passes="conv scan dlopen dlpreopen link" ;; *) passes="conv" ;; esac for pass in $passes; do if test "$linkmode" = prog; then # Determine which files to process case $pass in dlopen) libs="$dlfiles" save_deplibs="$deplibs" # Collect dlpreopened libraries deplibs= ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi for deplib in $libs; do lib= found=no case $deplib in -l*) if test "$linkmode" = oldlib && test "$linkmode" = obj; then $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 continue fi if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do # Search the libtool library lib="$searchdir/lib${name}.la" if test -f "$lib"; then found=yes break fi done if test "$found" != yes; then # deplib doesn't seem to be a libtool library if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else deplibs="$deplib $deplibs" test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" fi continue fi ;; # -l -L*) case $linkmode in lib) deplibs="$deplib $deplibs" test "$pass" = conv && continue newdependency_libs="$deplib $newdependency_libs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` ;; prog) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi if test "$pass" = scan; then deplibs="$deplib $deplibs" newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi ;; *) $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 ;; esac # linkmode continue ;; # -L -R*) if test "$pass" = link; then dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` # Make sure the xrpath contains only unique directories. case "$xrpath " in *" $dir "*) ;; *) xrpath="$xrpath $dir" ;; esac fi deplibs="$deplib $deplibs" continue ;; *.la) lib="$deplib" ;; *.$libext) if test "$pass" = conv; then deplibs="$deplib $deplibs" continue fi case $linkmode in lib) if test "$deplibs_check_method" != pass_all; then echo echo "*** Warning: This library needs some functionality provided by $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." else echo echo "*** Warning: Linking the shared library $output against the" echo "*** static library $deplib is not portable!" deplibs="$deplib $deplibs" fi continue ;; prog) if test "$pass" != link; then deplibs="$deplib $deplibs" else compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" fi continue ;; esac # linkmode ;; # *.$libext *.lo | *.$objext) if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlopen support or we're linking statically, # we need to preload. newdlprefiles="$newdlprefiles $deplib" compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" else newdlfiles="$newdlfiles $deplib" fi continue ;; %DEPLIBS%) alldeplibs=yes continue ;; esac # case $deplib if test "$found" = yes || test -f "$lib"; then : else $echo "$modename: cannot find the library \`$lib'" 1>&2 exit 1 fi # Check to see that this really is a libtool archive. if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` test "X$ladir" = "X$lib" && ladir="." dlname= dlopen= dlpreopen= libdir= library_names= old_library= # If the library was installed with an old release of libtool, # it will not redefine variable installed. installed=yes # Read the .la file case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then # Add dl[pre]opened files of deplib test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi if test "$pass" = conv; then # Only check for convenience libraries deplibs="$lib $deplibs" if test -z "$libdir"; then if test -z "$old_library"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit 1 fi # It is a libtool convenience library, so add in its objects. convenience="$convenience $ladir/$objdir/$old_library" old_convenience="$old_convenience $ladir/$objdir/$old_library" tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done elif test "$linkmode" != prog && test "$linkmode" != lib; then $echo "$modename: \`$lib' is not a convenience library" 1>&2 exit 1 fi continue fi # $pass = conv # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done if test -z "$linklib"; then $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit 1 fi # This library was specified with -dlopen. if test "$pass" = dlopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 exit 1 fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking # statically, we need to preload. dlprefiles="$dlprefiles $lib" else newdlfiles="$newdlfiles $lib" fi continue fi # $pass = dlopen # We need an absolute path. case $ladir in [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; *) abs_ladir=`cd "$ladir" && pwd` if test -z "$abs_ladir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 abs_ladir="$ladir" fi ;; esac laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` # Find the relevant object directory and library name. if test "X$installed" = Xyes; then if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then $echo "$modename: warning: library \`$lib' was moved." 1>&2 dir="$ladir" absdir="$abs_ladir" libdir="$abs_ladir" else dir="$libdir" absdir="$libdir" fi else dir="$ladir/$objdir" absdir="$abs_ladir/$objdir" # Remove this search path later notinst_path="$notinst_path $abs_ladir" fi # $installed = yes name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` # This library was specified with -dlpreopen. if test "$pass" = dlpreopen; then if test -z "$libdir"; then $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 exit 1 fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then newdlprefiles="$newdlprefiles $dir/$old_library" # Otherwise, use the dlname, so that lt_dlopen finds it. elif test -n "$dlname"; then newdlprefiles="$newdlprefiles $dir/$dlname" else newdlprefiles="$newdlprefiles $dir/$linklib" fi fi # $pass = dlpreopen if test -z "$libdir"; then # Link the convenience library if test "$linkmode" = lib; then deplibs="$dir/$old_library $deplibs" elif test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else deplibs="$lib $deplibs" fi continue fi if test "$linkmode" = prog && test "$pass" != link; then newlib_search_path="$newlib_search_path $ladir" deplibs="$lib $deplibs" linkalldeplibs=no if test "$link_all_deplibs" != no || test -z "$library_names" || test "$build_libtool_libs" = no; then linkalldeplibs=yes fi tmp_libs= for deplib in $dependency_libs; do case $deplib in -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test esac # Need to link against all dependency_libs? if test "$linkalldeplibs" = yes; then deplibs="$deplib $deplibs" else # Need to hardcode shared library paths # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... link_static=no # Whether the deplib will be linked statically if test -n "$library_names" && { test "$prefer_static_libs" = no || test -z "$old_library"; }; then # Link against this shared library if test "$linkmode,$pass" = "prog,link" || { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. case " $sys_lib_dlsearch_path " in *" $absdir "*) ;; *) case "$compile_rpath " in *" $absdir "*) ;; *) compile_rpath="$compile_rpath $absdir" esac ;; esac case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; *) case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" esac ;; esac if test "$linkmode" = prog; then # We need to hardcode the library path if test -n "$shlibpath_var"; then # Make sure the rpath contains only unique directories. case "$temp_rpath " in *" $dir "*) ;; *" $absdir "*) ;; *) temp_rpath="$temp_rpath $dir" ;; esac fi fi fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname set dummy $library_names realname="$2" shift; shift libname=`eval \\$echo \"$libname_spec\"` # use dlname if we got it. it's perfectly good, no? if test -n "$dlname"; then soname="$dlname" elif test -n "$soname_spec"; then # bleh windows case $host in *cygwin*) major=`expr $current - $age` versuffix="-$major" ;; esac eval soname=\"$soname_spec\" else soname="$realname" fi # Make a new name for the extract_expsyms_cmds to use soroot="$soname" soname=`echo $soroot | sed -e 's/^.*\///'` newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" save_ifs="$IFS"; IFS='~' eval cmds=\"$extract_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Create $newlib if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" save_ifs="$IFS"; IFS='~' eval cmds=\"$old_archive_from_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # make sure the library variables are pointing to the new library dir=$output_objdir linklib=$newlib fi # test -n "$old_archive_from_expsyms_cmds" if test "$linkmode" = prog || test "$mode" != relink; then add_shlibpath= add_dir= add= lib_linked=yes case $hardcode_action in immediate | unsupported) if test "$hardcode_direct" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = no; then case $host in *-*-sunos*) add_shlibpath="$dir" ;; esac add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = no; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; relink) if test "$hardcode_direct" = yes; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$dir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then add_shlibpath="$dir" add="-l$name" else lib_linked=no fi ;; *) lib_linked=no ;; esac if test "$lib_linked" != yes; then $echo "$modename: configuration error: unsupported hardcode properties" exit 1 fi if test -n "$add_shlibpath"; then case :$compile_shlibpath: in *":$add_shlibpath:"*) ;; *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac fi if test "$linkmode" = prog; then test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" test -n "$add" && compile_deplibs="$add $compile_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" if test "$hardcode_direct" != yes && \ test "$hardcode_minus_L" != yes && \ test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac fi fi fi if test "$linkmode" = prog || test "$mode" = relink; then add_shlibpath= add_dir= add= # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes; then add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then add_dir="-L$libdir" add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then case :$finalize_shlibpath: in *":$libdir:"*) ;; *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac add="-l$name" else # We cannot seem to hardcode it, guess we'll fake it. add_dir="-L$libdir" add="-l$name" fi if test "$linkmode" = prog; then test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" test -n "$add" && finalize_deplibs="$add $finalize_deplibs" else test -n "$add_dir" && deplibs="$add_dir $deplibs" test -n "$add" && deplibs="$add $deplibs" fi fi elif test "$linkmode" = prog; then if test "$alldeplibs" = yes && { test "$deplibs_check_method" = pass_all || { test "$build_libtool_libs" = yes && test -n "$library_names"; }; }; then # We only need to search for static libraries continue fi # Try to link the static library # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" compile_deplibs="$dir/$linklib $compile_deplibs" finalize_deplibs="$dir/$linklib $finalize_deplibs" else compile_deplibs="-l$name -L$dir $compile_deplibs" finalize_deplibs="-l$name -L$dir $finalize_deplibs" fi elif test "$build_libtool_libs" = yes; then # Not a shared library if test "$deplibs_check_method" != pass_all; then # We're trying link a shared library against a static one # but the system doesn't support it. # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo echo "*** Warning: This library needs some functionality provided by $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then echo "*** Therefore, libtool will create a static module, that should work " echo "*** as long as the dlopening application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi else convenience="$convenience $dir/$old_library" old_convenience="$old_convenience $dir/$old_library" deplibs="$dir/$old_library $deplibs" link_static=yes fi fi # link shared/static library? if test "$linkmode" = lib; then if test -n "$dependency_libs" && { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes || test "$link_static" = yes; }; then # Extract -R from dependency_libs temp_deplibs= for libdir in $dependency_libs; do case $libdir in -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` case " $xrpath " in *" $temp_xrpath "*) ;; *) xrpath="$xrpath $temp_xrpath";; esac;; *) temp_deplibs="$temp_deplibs $libdir";; esac done dependency_libs="$temp_deplibs" fi newlib_search_path="$newlib_search_path $absdir" # Link against this library test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" # ... and its dependency_libs tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" case "$tmp_libs " in *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac tmp_libs="$tmp_libs $deplib" done if test "$link_all_deplibs" != no; then # Add the search paths of all dependency libraries for deplib in $dependency_libs; do case $deplib in -L*) path="$deplib" ;; *.la) dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$deplib" && dir="." # We need an absolute path. case $dir in [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 absdir="$dir" fi ;; esac if grep "^installed=no" $deplib > /dev/null; then path="-L$absdir/$objdir" else eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit 1 fi if test "$absdir" != "$libdir"; then $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 fi path="-L$absdir" fi ;; *) continue ;; esac case " $deplibs " in *" $path "*) ;; *) deplibs="$deplibs $path" ;; esac done fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs if test "$pass" = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do deplibs="$deplib $deplibs" done fi if test "$pass" != dlopen; then test "$pass" != scan && dependency_libs="$newdependency_libs" if test "$pass" != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= for dir in $newlib_search_path; do case "$lib_search_path " in *" $dir "*) ;; *) lib_search_path="$lib_search_path $dir" ;; esac done newlib_search_path= fi if test "$linkmode,$pass" != "prog,link"; then vars="deplibs" else vars="compile_deplibs finalize_deplibs" fi for var in $vars dependency_libs; do # Add libraries to $var in reverse order eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do case $deplib in -L*) new_libs="$deplib $new_libs" ;; *) case " $specialdeplibs " in *" $deplib "*) new_libs="$deplib $new_libs" ;; *) case " $new_libs " in *" $deplib "*) ;; *) new_libs="$deplib $new_libs" ;; esac ;; esac ;; esac done tmp_libs= for deplib in $new_libs; do case $deplib in -L*) case " $tmp_libs " in *" $deplib "*) ;; *) tmp_libs="$tmp_libs $deplib" ;; esac ;; *) tmp_libs="$tmp_libs $deplib" ;; esac done eval $var=\"$tmp_libs\" done # for var fi if test "$pass" = "conv" && { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then libs="$deplibs" # reset libs deplibs= fi done # for pass if test "$linkmode" = prog; then dlfiles="$newdlfiles" dlprefiles="$newdlprefiles" fi case $linkmode in oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 fi if test -n "$export_symbols" || test -n "$export_symbols_regex"; then $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 fi # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" objs="$objs$old_deplibs" ;; lib) # Make sure we only generate libraries of the form `libNAME.la'. case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval libname=\"$libname_spec\" ;; *) if test "$module" = no; then $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 $echo "$help" 1>&2 exit 1 fi if test "$need_lib_prefix" != no; then # Add the "lib" prefix for modules if required name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` eval libname=\"$libname_spec\" else libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` fi ;; esac if test -n "$objs"; then if test "$deplibs_check_method" != pass_all; then $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 exit 1 else echo echo "*** Warning: Linking the shared library $output against the non-libtool" echo "*** objects $objs is not portable!" libobjs="$libobjs $objs" fi fi if test "$dlself" != no; then $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath if test "$#" -gt 2; then $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 fi install_libdir="$2" oldlibs= if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. libext=al oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 fi else # Parse the version information argument. save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 IFS="$save_ifs" if test -n "$8"; then $echo "$modename: too many parameters to \`-version-info'" 1>&2 $echo "$help" 1>&2 exit 1 fi current="$2" revision="$3" age="$4" # Check that each of the things are valid numbers. case $current in [0-9]*) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac case $revision in [0-9]*) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac case $age in [0-9]*) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 ;; esac if test "$age" -gt "$current"; then $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 exit 1 fi # Calculate the version variables. major= versuffix= verstring= case $version_type in none) ;; darwin) # Like Linux, but with the current version available in # verstring for coding it into the library header major=.`expr $current - $age` versuffix="$major.$age.$revision" # Darwin ld doesn't like 0 for these options... minor_current=`expr $current + 1` verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ;; freebsd-aout) major=".$current" versuffix=".$current.$revision"; ;; freebsd-elf) major=".$current" versuffix=".$current"; ;; irix) major=`expr $current - $age + 1` verstring="sgi$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test "$loop" -ne 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` verstring="sgi$major.$iface:$verstring" done # Before this point, $major must not contain `.'. major=.$major versuffix="$major.$revision" ;; linux) major=.`expr $current - $age` versuffix="$major.$age.$revision" ;; osf) major=`expr $current - $age` versuffix=".$current.$age.$revision" verstring="$current.$age.$revision" # Add in all the interfaces that we are compatible with. loop=$age while test "$loop" -ne 0; do iface=`expr $current - $loop` loop=`expr $loop - 1` verstring="$verstring:${iface}.0" done # Make executables depend on our current version. verstring="$verstring:${current}.0" ;; sunos) major=".$current" versuffix=".$current.$revision" ;; windows) # Use '-' rather than '.', since we only want one # extension on DOS 8.3 filesystems. major=`expr $current - $age` versuffix="-$major" ;; *) $echo "$modename: unknown library version type \`$version_type'" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 exit 1 ;; esac # Clear the version info if we defaulted, and they specified a release. if test -z "$vinfo" && test -n "$release"; then major= verstring="0.0" case $version_type in darwin) # we can't check for "0.0" in archive_cmds due to quoting # problems, so we reset it completely verstring="" ;; *) verstring="0.0" ;; esac if test "$need_version" = no; then versuffix= else versuffix=".0.0" fi fi # Remove version info from name if versioning should be avoided if test "$avoid_version" = yes && test "$need_version" = no; then major= versuffix= verstring="" fi # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 build_libtool_libs=no build_old_libs=yes fi else # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi fi if test "$mode" != relink; then # Remove our outputs. $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* fi # Now set the variables for building old libraries. if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then oldlibs="$oldlibs $output_objdir/$libname.$libext" # Transform .lo files to .o files. oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi # Eliminate all temporary directories. for path in $notinst_path; do lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` done if test -n "$xrpath"; then # If the user specified any rpath flags, then add them. temp_xrpath= for libdir in $xrpath; do temp_xrpath="$temp_xrpath -R$libdir" case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then dependency_libs="$temp_xrpath $dependency_libs" fi fi # Make sure dlfiles contains only unique files that won't be dlpreopened old_dlfiles="$dlfiles" dlfiles= for lib in $old_dlfiles; do case " $dlprefiles $dlfiles " in *" $lib "*) ;; *) dlfiles="$dlfiles $lib" ;; esac done # Make sure dlprefiles contains only unique files old_dlprefiles="$dlprefiles" dlprefiles= for lib in $old_dlprefiles; do case "$dlprefiles " in *" $lib "*) ;; *) dlprefiles="$dlprefiles $lib" ;; esac done if test "$build_libtool_libs" = yes; then if test -n "$rpath"; then case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) # these systems don't actually have a c library (as such)! ;; *-*-rhapsody* | *-*-darwin1.[012]) # Rhapsody C library is in the System framework deplibs="$deplibs -framework System" ;; *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; *-*-openbsd*) # Do not include libc due to us having libc/libc_r. ;; *) # Add libc to deplibs on all other systems if necessary. if test "$build_libtool_need_lc" = "yes"; then deplibs="$deplibs -lc" fi ;; esac fi # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname release_save=$release versuffix_save=$versuffix major_save=$major # I'm not sure if I'm treating the release correctly. I think # release should show up in the -l (ie -lgmp5) so we don't want to # add it in twice. Is that correct? release="" versuffix="" major="" newdeplibs= droppeddeps=no case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check # whether the library exists or not. But this is on # osf3 & osf4 and I'm not really sure... Just # implementing what was already the behaviour. newdeplibs=$deplibs ;; test_compile) # This code stresses the "libraries are programs" paradigm to its # limits. Maybe even breaks it. We compile a program, linking it # against the deplibs as a proxy for the library. Then we can check # whether they linked in statically or dynamically with ldd. $rm conftest.c cat > conftest.c </dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. # We might still enter an endless loop, since a link # loop can be closed while we follow links, # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | sed 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ | sed 10q \ | egrep "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done if test -n "$a_deplib" ; then droppeddeps=yes echo echo "*** Warning: This library needs some functionality provided by $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; match_pattern*) set dummy $deplibs_check_method match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do if eval echo \"$potent_lib\" 2>/dev/null \ | sed 10q \ | egrep "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" break 2 fi done done if test -n "$a_deplib" ; then droppeddeps=yes echo echo "*** Warning: This library needs some functionality provided by $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." fi else # Add a -L argument. newdeplibs="$newdeplibs $a_deplib" fi done # Gone through all deplibs. ;; none | unknown | *) newdeplibs="" if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | grep . >/dev/null; then echo if test "X$deplibs_check_method" = "Xnone"; then echo "*** Warning: inter-library dependencies are not supported in this platform." else echo "*** Warning: inter-library dependencies are not known to be supported." fi echo "*** All declared inter-library dependencies are being dropped." droppeddeps=yes fi ;; esac versuffix=$versuffix_save major=$major_save release=$release_save libname=$libname_save name=$name_save case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac if test "$droppeddeps" = yes; then if test "$module" = yes; then echo echo "*** Warning: libtool could not satisfy all declared inter-library" echo "*** dependencies of module $libname. Therefore, libtool will create" echo "*** a static module, that should work as long as the dlopening" echo "*** application is linked with the -dlopen flag." if test -z "$global_symbol_pipe"; then echo echo "*** However, this would only work if libtool was able to extract symbol" echo "*** lists from a program, using \`nm' or equivalent, but libtool could" echo "*** not find such a program. So, this module is probably useless." echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi else echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." if test "$allow_undefined" = no; then echo echo "*** Since this library must not contain undefined symbols," echo "*** because either the platform does not support them or" echo "*** it was explicitly requested with -no-undefined," echo "*** libtool will only create a static version of it." if test "$build_old_libs" = no; then oldlibs="$output_objdir/$libname.$libext" build_libtool_libs=module build_old_libs=yes else build_libtool_libs=no fi fi fi fi # Done checking deplibs! deplibs=$newdeplibs fi # All the library-specific variables (install_libdir is set above). library_names= old_library= dlname= # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= dep_rpath= rpath="$finalize_rpath" test "$mode" != relink && rpath="$compile_rpath$rpath" for libdir in $rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" dep_rpath="$dep_rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval dep_rpath=\"$hardcode_libdir_flag_spec\" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" fi test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" fi shlibpath="$finalize_shlibpath" test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" if test -n "$shlibpath"; then eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" fi # Get the real and link names of the library. eval library_names=\"$library_names_spec\" set dummy $library_names realname="$2" shift; shift if test -n "$soname_spec"; then eval soname=\"$soname_spec\" else soname="$realname" fi test -z "$dlname" && dlname=$soname lib="$output_objdir/$realname" for link do linknames="$linknames $link" done # Ensure that we have .o objects for linkers which dislike .lo # (e.g. aix) in case we are running --disable-static for obj in $libobjs; do xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$obj"; then xdir="." else xdir="$xdir" fi baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` if test ! -f $xdir/$oldobj; then $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? fi done # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` # Prepare the list of exported symbols if test -z "$export_symbols"; then if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then $show "generating symbol list for \`$libname.la'" export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols eval cmds=\"$export_symbols_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" if test -n "$export_symbols_regex"; then $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' $show "$mv \"${export_symbols}T\" \"$export_symbols\"" $run eval '$mv "${export_symbols}T" "$export_symbols"' fi fi fi if test -n "$export_symbols" && test -n "$include_expsyms"; then $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' fi if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "mkdir $gentop" $run mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" for xlib in $convenience; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "mkdir $xdir" $run mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` done fi fi if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" linker_flags="$linker_flags $flag" fi # Make a backup of the uninstalled library when relinking if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Do each of the archive commands. if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval cmds=\"$archive_expsym_cmds\" else eval cmds=\"$archive_cmds\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? exit 0 fi # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? fi done # If -module or -export-dynamic was specified, set the dlname. if test "$module" = yes || test "$export_dynamic" = yes; then # On all known operating systems, these are identical. dlname="$soname" fi fi ;; obj) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 fi if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 fi if test -n "$rpath"; then $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 fi if test -n "$xrpath"; then $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 fi if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi case $output in *.lo) if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit 1 fi libobj="$output" obj=`$echo "X$output" | $Xsed -e "$lo2o"` ;; *) libobj= obj="$output" ;; esac # Delete the old objects. $run $rm $obj $libobj # Objects from convenience libraries. This assumes # single-version convenience libraries. Whenever we create # different ones for PIC/non-PIC, this we'll have to duplicate # the extraction. reload_conv_objs= gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" else gentop="$output_objdir/${obj}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "mkdir $gentop" $run mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" for xlib in $convenience; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "mkdir $xdir" $run mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` done fi fi # Create the old-style object. reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" eval cmds=\"$reload_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" # Exit if we aren't doing a library object file. if test -z "$libobj"; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit 0 fi if test "$build_libtool_libs" != yes; then if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. $show "echo timestamp > $libobj" $run eval "echo timestamp > $libobj" || exit $? exit 0 fi if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" eval cmds=\"$reload_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" else # Just create a symlink. $show $rm $libobj $run $rm $libobj xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$libobj"; then xdir="." else xdir="$xdir" fi baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` $show "(cd $xdir && $LN_S $oldobj $baseobj)" $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? fi if test -n "$gentop"; then $show "${rm}r $gentop" $run ${rm}r $gentop fi exit 0 ;; prog) case $host in *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi if test -n "$release"; then $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 fi if test "$preload" = yes; then if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." fi fi case $host in *-*-rhapsody* | *-*-darwin1.[012]) # On Rhapsody replace the C library is the System framework compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` ;; esac compile_command="$compile_command $compile_deplibs" finalize_command="$finalize_command $finalize_deplibs" if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; esac done fi # Now hardcode the library paths rpath= hardcode_libdirs= for libdir in $compile_rpath $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; *) perm_rpath="$perm_rpath $libdir" ;; esac fi case $host in *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) case :$dllsearchpath: in *":$libdir:"*) ;; *) dllsearchpath="$dllsearchpath:$libdir";; esac ;; esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi compile_rpath="$rpath" rpath= hardcode_libdirs= for libdir in $finalize_rpath; do if test -n "$hardcode_libdir_flag_spec"; then if test -n "$hardcode_libdir_separator"; then if test -z "$hardcode_libdirs"; then hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" ;; esac fi else eval flag=\"$hardcode_libdir_flag_spec\" rpath="$rpath $flag" fi elif test -n "$runpath_var"; then case "$finalize_perm_rpath " in *" $libdir "*) ;; *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; esac fi done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" eval rpath=\" $hardcode_libdir_flag_spec\" fi finalize_rpath="$rpath" if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` fi dlsyms= if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then if test -n "$NM" && test -n "$global_symbol_pipe"; then dlsyms="${outputname}S.c" else $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 fi fi if test -n "$dlsyms"; then case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. nlist="$output_objdir/${outputname}.nm" $show "$rm $nlist ${nlist}S ${nlist}T" $run $rm "$nlist" "${nlist}S" "${nlist}T" # Parse the name list into a source file. $show "creating $output_objdir/$dlsyms" test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ /* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ /* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ #ifdef __cplusplus extern \"C\" { #endif /* Prevent the only kind of declaration conflicts we can make. */ #define lt_preloaded_symbols some_other_symbol /* External symbol declarations for the compiler. */\ " if test "$dlself" = yes; then $show "generating symbol list for \`$output'" test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -n "$exclude_expsyms"; then $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi if test -n "$export_symbols_regex"; then $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi # Prepare the list of exported symbols if test -z "$export_symbols"; then export_symbols="$output_objdir/$output.exp" $run $rm $export_symbols $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' else $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' fi fi for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" name=`echo "$arg" | sed -e 's%^.*/%%'` $run eval 'echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done if test -z "$run"; then # Make sure we have at least an empty file. test -f "$nlist" || : > "$nlist" if test -n "$exclude_expsyms"; then egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T $mv "$nlist"T "$nlist" fi # Try sorting and uniquifying the output. if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S fi if test -f "$nlist"S; then eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' else echo '/* NONE */' >> "$output_objdir/$dlsyms" fi $echo >> "$output_objdir/$dlsyms" "\ #undef lt_preloaded_symbols #if defined (__STDC__) && __STDC__ # define lt_ptr void * #else # define lt_ptr char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr address; } lt_preloaded_symbols[] = {\ " eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms" $echo >> "$output_objdir/$dlsyms" "\ {0, (lt_ptr) 0} }; /* This works around a problem in FreeBSD linker */ #ifdef FREEBSD_WORKAROUND static const void *lt_preloaded_setup() { return lt_preloaded_symbols; } #endif #ifdef __cplusplus } #endif\ " fi pic_flag_for_symtable= case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DPIC";; esac esac # Now compile the dynamic symbol file. $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" # Transform the symbol file into the correct name. compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ;; *) $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 exit 1 ;; esac else # We keep going just in case the user didn't refer to # lt_preloaded_symbols. The linker will fail if global_symbol_pipe # really was required. # Nullify the symbol file. compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi if test "$need_relink" = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" # We have no uninstalled library dependencies, so finalize right now. $show "$link_command" $run eval "$link_command" status=$? # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" $run $rm "$output_objdir/${outputname}S.${objext}" fi exit $status fi if test -n "$shlibpath_var"; then # We should set the shlibpath_var rpath= for dir in $temp_rpath; do case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" ;; *) # Relative path: add a thisdir entry. rpath="$rpath\$thisdir/$dir:" ;; esac done temp_rpath="$rpath" fi if test -n "$compile_shlibpath$finalize_shlibpath"; then compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" fi if test -n "$finalize_shlibpath"; then finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" fi compile_var= finalize_var= if test -n "$runpath_var"; then if test -n "$perm_rpath"; then # We should set the runpath_var. rpath= for dir in $perm_rpath; do rpath="$rpath$dir:" done compile_var="$runpath_var=\"$rpath\$$runpath_var\" " fi if test -n "$finalize_perm_rpath"; then # We should set the runpath_var. rpath= for dir in $finalize_perm_rpath; do rpath="$rpath$dir:" done finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " fi fi if test "$no_install" = yes; then # We don't need to create a wrapper script. link_command="$compile_var$compile_command$compile_rpath" # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` # Delete the old output file. $run $rm $output # Link the executable and exit $show "$link_command" $run eval "$link_command" || exit $? exit 0 fi if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else if test "$fast_install" != no; then link_command="$finalize_var$compile_command$finalize_rpath" if test "$fast_install" = yes; then relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` else # fast_install is set to needless relink_command= fi else link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" fi fi # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname $show "$link_command" $run eval "$link_command" || exit $? # Now create the wrapper script. $show "creating $output" # Quote the relink command for shipping. if test -n "$relink_command"; then # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done relink_command="(cd `pwd`; $relink_command)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $0 --fallback-echo"; then case $0 in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; *) qecho="$SHELL `pwd`/$0 --fallback-echo";; esac qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` else qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` fi # Only actually do things if our run command is non-null. if test -z "$run"; then # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in *.exe) output=`echo $output|sed 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in *cygwin*) exeext=.exe ;; *) exeext= ;; esac $rm $output trap "$rm $output; exit 1" 1 2 15 $echo > $output "\ #! $SHELL # $output - temporary wrapper script for $objdir/$outputname # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # The $output program cannot be directly executed until all the libtool # libraries that it depends on are installed. # # This wrapper script should never be moved out of the build directory. # If it is, it will not operate correctly. # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then echo=\"$qecho\" file=\"\$0\" # Make sure echo works. if test \"X\$1\" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then # Yippee, \$echo works! : else # Restart under the correct shell, and then maybe \$echo will work. exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} fi fi\ " $echo >> $output "\ # Find the directory that this script lives in. thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` done # Try to get the absolute directory name. absdir=\`cd \"\$thisdir\" && pwd\` test -n \"\$absdir\" && thisdir=\"\$absdir\" " if test "$fast_install" = yes; then echo >> $output "\ program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" if test ! -d \"\$progdir\"; then $mkdir \"\$progdir\" else $rm \"\$progdir/\$file\" fi" echo >> $output "\ # relink executable if necessary if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" exit 1 fi fi $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || { $rm \"\$progdir/\$program\"; $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } $rm \"\$progdir/\$file\" fi" else echo >> $output "\ program='$outputname' progdir=\"\$thisdir/$objdir\" " fi echo >> $output "\ if test -f \"\$progdir/\$program\"; then" # Export our shlibpath_var if we have one. if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then $echo >> $output "\ # Add our own library path to $shlibpath_var $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var # The second colon is a workaround for a bug in BeOS R4 sed $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var " fi # fixup the dll searchpath if we need to. if test -n "$dllsearchpath"; then $echo >> $output "\ # Add the dll search path components to the executable PATH PATH=$dllsearchpath:\$PATH " fi $echo >> $output "\ if test \"\$libtool_execute_magic\" != \"$magic\"; then # Run the actual program with our arguments. " case $host in # win32 systems need to use the prog path for dll # lookup to work *-*-cygwin* | *-*-pw32*) $echo >> $output "\ exec \$progdir/\$program \${1+\"\$@\"} " ;; # Backslashes separate directories on plain windows *-*-mingw | *-*-os2*) $echo >> $output "\ exec \$progdir\\\\\$program \${1+\"\$@\"} " ;; *) $echo >> $output "\ # Export the path to the program. PATH=\"\$progdir:\$PATH\" export PATH exec \$program \${1+\"\$@\"} " ;; esac $echo >> $output "\ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" exit 1 fi else # The program doesn't exist. \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 \$echo \"This script is just a wrapper for \$program.\" 1>&2 echo \"See the $PACKAGE documentation for more information.\" 1>&2 exit 1 fi fi\ " chmod +x $output fi exit 0 ;; esac # See if we need to build an old-fashioned archive. for oldlib in $oldlibs; do if test "$build_libtool_libs" = convenience; then oldobjs="$libobjs_save" addlibs="$convenience" build_libtool_libs=no else if test "$build_libtool_libs" = module; then oldobjs="$libobjs_save" build_libtool_libs=no else oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` fi addlibs="$old_convenience" fi if test -n "$addlibs"; then gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" $show "mkdir $gentop" $run mkdir "$gentop" status=$? if test "$status" -ne 0 && test ! -d "$gentop"; then exit $status fi generated="$generated $gentop" # Add in members from convenience archives. for xlib in $addlibs; do # Extract the objects. case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` xdir="$gentop/$xlib" $show "${rm}r $xdir" $run ${rm}r "$xdir" $show "mkdir $xdir" $run mkdir "$xdir" status=$? if test "$status" -ne 0 && test ! -d "$xdir"; then exit $status fi $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` done fi # Do each command in the archive commands. if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then eval cmds=\"$old_archive_from_new_cmds\" else # Ensure that we have .o objects in place in case we decided # not to build a shared library, and have fallen back to building # static libs even though --disable-static was passed! for oldobj in $oldobjs; do if test ! -f $oldobj; then xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` if test "X$xdir" = "X$oldobj"; then xdir="." else xdir="$xdir" fi baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` $show "(cd $xdir && ${LN_S} $obj $baseobj)" $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? fi done eval cmds=\"$old_archive_cmds\" fi save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$generated"; then $show "${rm}r$generated" $run ${rm}r$generated fi # Now create the libtool archive. case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" # Preserve any variables that may affect compiler behavior for var in $variables_saved_for_relink; do if eval test -z \"\${$var+set}\"; then relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done # Quote the link command for shipping. relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` # Only create the output if not a dry run. if test -z "$run"; then for installed in no yes; do if test "$installed" = yes; then if test -z "$install_libdir"; then break fi output="$output_objdir/$outputname"i # Replace all uninstalled libtool libraries with the installed ones newdependency_libs= for deplib in $dependency_libs; do case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit 1 fi newdependency_libs="$newdependency_libs $libdir/$name" ;; *) newdependency_libs="$newdependency_libs $deplib" ;; esac done dependency_libs="$newdependency_libs" newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi newdlfiles="$newdlfiles $libdir/$name" done dlfiles="$newdlfiles" newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi newdlprefiles="$newdlprefiles $libdir/$name" done dlprefiles="$newdlprefiles" fi $rm $output # place dlname in correct position for cygwin tdlname=$dlname case $host,$output,$installed,$module,$dlname in *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP # # Please DO NOT delete this file! # It is necessary for linking the library. # The name that we can dlopen(3). dlname='$tdlname' # Names of this library. library_names='$library_names' # The name of the static archive. old_library='$old_library' # Libraries that this one depends upon. dependency_libs='$dependency_libs' # Version information for $libname. current=$current age=$age revision=$revision # Is this an already installed library? installed=$installed # Files to dlopen/dlpreopen dlopen='$dlfiles' dlpreopen='$dlprefiles' # Directory that this library needs to be installed in: libdir='$install_libdir'" if test "$installed" = no && test "$need_relink" = yes; then $echo >> $output "\ relink_command=\"$relink_command\"" fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit 0 ;; # libtool install mode install) modename="$modename: install" # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || # Allow the use of GNU shtool's install command. $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$arg " arg="$1" shift else install_prog= arg="$nonopt" fi # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$install_prog$arg" # We need to accept at least all the BSD install flags. dest= files= opts= prev= install_type= isdir=no stripme= for arg do if test -n "$dest"; then files="$files $dest" dest="$arg" continue fi case $arg in -d) isdir=yes ;; -f) prev="-f" ;; -g) prev="-g" ;; -m) prev="-m" ;; -o) prev="-o" ;; -s) stripme=" -s" continue ;; -*) ;; *) # If the previous option needed an argument, then skip it. if test -n "$prev"; then prev= else dest="$arg" continue fi ;; esac # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; esac install_prog="$install_prog $arg" done if test -z "$install_prog"; then $echo "$modename: you must specify an install program" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -n "$prev"; then $echo "$modename: the \`$prev' option requires an argument" 1>&2 $echo "$help" 1>&2 exit 1 fi if test -z "$files"; then if test -z "$dest"; then $echo "$modename: no file or destination specified" 1>&2 else $echo "$modename: you must specify a destination" 1>&2 fi $echo "$help" 1>&2 exit 1 fi # Strip any trailing slash from the destination. dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` # Check to see that the destination is a directory. test -d "$dest" && isdir=yes if test "$isdir" = yes; then destdir="$dest" destname= else destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` test "X$destdir" = "X$dest" && destdir=. destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` # Not a directory, so check to see that there is only one file specified. set dummy $files if test "$#" -gt 2; then $echo "$modename: \`$dest' is not a directory" 1>&2 $echo "$help" 1>&2 exit 1 fi fi case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac done ;; esac # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" staticlibs= future_libdirs= current_libdirs= for file in $files; do # Do each installation. case $file in *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit 1 fi library_names= old_library= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Add the libdir to current_libdirs if it is the destination. if test "X$destdir" = "X$libdir"; then case "$current_libdirs " in *" $libdir "*) ;; *) current_libdirs="$current_libdirs $libdir" ;; esac else # Note the libdir as a future libdir. case "$future_libdirs " in *" $libdir "*) ;; *) future_libdirs="$future_libdirs $libdir" ;; esac fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" if test -n "$relink_command"; then $echo "$modename: warning: relinking \`$file'" 1>&2 $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 continue fi fi # See the names of the shared library. set dummy $library_names if test -n "$2"; then realname="$2" shift shift srcname="$realname" test -n "$relink_command" && srcname="$realname"T # Install the shared library and build the symlinks. $show "$install_prog $dir/$srcname $destdir/$realname" $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$striplib $destdir/$realname" $run eval "$striplib $destdir/$realname" || exit $? fi if test "$#" -gt 0; then # Delete the old symlinks, and create new ones. for linkname do if test "$linkname" != "$realname"; then $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" fi done fi # Do each command in the postinstall commands. lib="$destdir/$realname" eval cmds=\"$postinstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" fi # Install the pseudo-library for information purposes. name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` instname="$dir/$name"i $show "$install_prog $instname $destdir/$name" $run eval "$install_prog $instname $destdir/$name" || exit $? # Maybe install the static library, too. test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" ;; *.lo) # Install (i.e. copy) a libtool object. # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Deduce the name of the destination old-style object file. case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; *.$objext) staticdest="$destfile" destfile= ;; *) $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac # Install the libtool object if requested. if test -n "$destfile"; then $show "$install_prog $file $destfile" $run eval "$install_prog $file $destfile" || exit $? fi # Install the old object if enabled. if test "$build_old_libs" = yes; then # Deduce the name of the old-style object file. staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` $show "$install_prog $staticobj $staticdest" $run eval "$install_prog \$staticobj \$staticdest" || exit $? fi exit 0 ;; *) # Figure out destination file name, if it wasn't already specified. if test -n "$destname"; then destfile="$destdir/$destname" else destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` destfile="$destdir/$destfile" fi # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then notinst_deplibs= relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 exit 1 fi finalize=yes for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done relink_command= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then tmpdir="/tmp" test -n "$TMPDIR" && tmpdir="$TMPDIR" tmpdir=`mktemp -d $tmpdir/libtool-XXXXXX 2> /dev/null` if test $? = 0 ; then : else tmpdir="$tmpdir/libtool-$$" fi if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : else $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` $show "$relink_command" if $run eval "$relink_command"; then : else $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 ${rm}r "$tmpdir" continue fi file="$outputname" else $echo "$modename: warning: cannot relink \`$file'" 1>&2 fi else # Install the binary that we compiled earlier. file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` fi fi # remove .exe since cygwin /usr/bin/install will append another # one anyways case $install_prog,$host in /usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok ;; *.exe:*) destfile=$destfile.exe ;; *:*.exe) destfile=`echo $destfile | sed -e 's,.exe$,,'` ;; esac ;; esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" ;; esac done for file in $staticlibs; do name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` # Set up the ranlib parameters. oldlib="$destdir/$name" $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? if test -n "$stripme" && test -n "$striplib"; then $show "$old_striplib $oldlib" $run eval "$old_striplib $oldlib" || exit $? fi # Do each command in the postinstall commands. eval cmds=\"$old_postinstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" done if test -n "$future_libdirs"; then $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 fi if test -n "$current_libdirs"; then # Maybe just do a dry run. test -n "$run" && current_libdirs=" -n$current_libdirs" exec_cmd='$SHELL $0 --finish$current_libdirs' else exit 0 fi ;; # libtool finish mode finish) modename="$modename: finish" libdirs="$nonopt" admincmds= if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then for dir do libdirs="$libdirs $dir" done for libdir in $libdirs; do if test -n "$finish_cmds"; then # Do each command in the finish commands. eval cmds=\"$finish_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || admincmds="$admincmds $cmd" done IFS="$save_ifs" fi if test -n "$finish_eval"; then # Do the single finish_eval. eval cmds=\"$finish_eval\" $run eval "$cmds" || admincmds="$admincmds $cmds" fi done fi # Exit here if they wanted silent mode. test "$show" = : && exit 0 echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" for libdir in $libdirs; do echo " $libdir" done echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" echo " during execution" fi if test -n "$runpath_var"; then echo " - add LIBDIR to the \`$runpath_var' environment variable" echo " during linking" fi if test -n "$hardcode_libdir_flag_spec"; then libdir=LIBDIR eval flag=\"$hardcode_libdir_flag_spec\" echo " - use the \`$flag' linker flag" fi if test -n "$admincmds"; then echo " - have your system administrator run these commands:$admincmds" fi if test -f /etc/ld.so.conf; then echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" fi echo echo "See any operating system documentation about shared libraries for" echo "more information, such as the ld(1) and ld.so(8) manual pages." echo "----------------------------------------------------------------------" exit 0 ;; # libtool execute mode execute) modename="$modename: execute" # The first argument is the command name. cmd="$nonopt" if test -z "$cmd"; then $echo "$modename: you must specify a COMMAND" 1>&2 $echo "$help" exit 1 fi # Handle -dlopen flags immediately. for file in $execute_dlfiles; do if test ! -f "$file"; then $echo "$modename: \`$file' is not a file" 1>&2 $echo "$help" 1>&2 exit 1 fi dir= case $file in *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 exit 1 fi # Read the libtool library. dlname= library_names= # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Skip this library if it cannot be dlopened. if test -z "$dlname"; then # Warn if it was a shared library. test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" continue fi dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. if test -f "$dir/$objdir/$dlname"; then dir="$dir/$objdir" else $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 exit 1 fi ;; *.lo) # Just add the directory containing the .lo file. dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` test "X$dir" = "X$file" && dir=. ;; *) $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 continue ;; esac # Get the absolute pathname. absdir=`cd "$dir" && pwd` test -n "$absdir" && dir="$absdir" # Now add the directory to shlibpath_var. if eval "test -z \"\$$shlibpath_var\""; then eval "$shlibpath_var=\"\$dir\"" else eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" fi done # This variable tells wrapper scripts just to set shlibpath_var # rather than running their programs. libtool_execute_magic="$magic" # Check if any of the arguments is a wrapper script. args= for file do case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Transform arg to wrapped name. file="$progdir/$program" fi ;; esac # Quote arguments (to preserve shell metacharacters). file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` args="$args \"$file\"" done if test -z "$run"; then if test -n "$shlibpath_var"; then # Export the shlibpath_var. eval "export $shlibpath_var" fi # Restore saved enviroment variables if test "${save_LC_ALL+set}" = set; then LC_ALL="$save_LC_ALL"; export LC_ALL fi if test "${save_LANG+set}" = set; then LANG="$save_LANG"; export LANG fi # Now prepare to actually exec the command. exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" $echo "export $shlibpath_var" fi $echo "$cmd$args" exit 0 fi ;; # libtool clean and uninstall mode clean | uninstall) modename="$modename: $mode" rm="$nonopt" files= rmforce= exit_status=0 # This variable tells wrapper scripts just to set variables rather # than running their programs. libtool_install_magic="$magic" for arg do case $arg in -f) rm="$rm $arg"; rmforce=yes ;; -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac done if test -z "$rm"; then $echo "$modename: you must specify an RM program" 1>&2 $echo "$help" 1>&2 exit 1 fi rmdirs= for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` if test "X$dir" = "X$file"; then dir=. objdir="$objdir" else objdir="$dir/$objdir" fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` test "$mode" = uninstall && objdir="$dir" # Remember objdir for removal later, being careful to avoid duplicates if test "$mode" = clean; then case " $rmdirs " in *" $objdir "*) ;; *) rmdirs="$rmdirs $objdir" ;; esac fi # Don't error if the file doesn't exist and rm -f was used. if (test -L "$file") >/dev/null 2>&1 \ || (test -h "$file") >/dev/null 2>&1 \ || test -f "$file"; then : elif test -d "$file"; then exit_status=1 continue elif test "$rmforce" = yes; then continue fi rmfiles="$file" case $name in *.la) # Possibly a libtool archive, so verify it. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. for n in $library_names; do rmfiles="$rmfiles $objdir/$n" done test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" if test "$mode" = uninstall; then if test -n "$library_names"; then # Do each command in the postuninstall commands. eval cmds=\"$postuninstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi if test -n "$old_library"; then # Do each command in the old_postuninstall commands. eval cmds=\"$old_postuninstall_cmds\" save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" if test "$?" -ne 0 && test "$rmforce" != yes; then exit_status=1 fi done IFS="$save_ifs" fi # FIXME: should reinstall the best remaining shared library. fi fi ;; *.lo) if test "$build_old_libs" = yes; then oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` rmfiles="$rmfiles $dir/$oldobj" fi ;; *) # Do a test to see if this is a libtool program. if test "$mode" = clean && (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then relink_command= . $dir/$file rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" if test "$fast_install" = yes && test -n "$relink_command"; then rmfiles="$rmfiles $objdir/lt-$name" fi fi ;; esac $show "$rm $rmfiles" $run $rm $rmfiles || exit_status=1 done # Try to remove the ${objdir}s in the directories where we deleted files for dir in $rmdirs; do if test -d "$dir"; then $show "rmdir $dir" $run rmdir $dir >/dev/null 2>&1 fi done exit $exit_status ;; "") $echo "$modename: you must specify a MODE" 1>&2 $echo "$generic_help" 1>&2 exit 1 ;; esac if test -z "$exec_cmd"; then $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$generic_help" 1>&2 exit 1 fi fi # test -z "$show_help" if test -n "$exec_cmd"; then eval exec $exec_cmd exit 1 fi # We need to display help for each of the modes. case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... Provide generalized library-building support services. --config show all configuration variables --debug enable verbose shell tracing -n, --dry-run display commands without modifying any files --features display basic configuration information and exit --finish same as \`--mode=finish' --help display this help message and exit --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages --version print version information MODE must be one of the following: clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries install install libraries or executables link create a library or an executable uninstall remove libraries from an installed directory MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for a more detailed description of MODE." exit 0 ;; clean) $echo \ "Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... Remove files from the build directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, object or program, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE -prefer-pic try to building PIC objects only -prefer-non-pic try to building non-PIC objects only -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file from the given SOURCEFILE. The output file name is determined by removing the directory component from SOURCEFILE, then substituting the C source code suffix \`.c' with the library object suffix, \`.lo'." ;; execute) $echo \ "Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... Automatically set library path, then run a program. This mode accepts the following additional options: -dlopen FILE add the directory containing FILE to the library path This mode sets the library path environment variable according to \`-dlopen' flags. If any of the ARGS are libtool executable wrappers, then they are translated into their corresponding uninstalled binary, and any of their required library directories are added to the library path. Then, COMMAND is executed, with ARGS as arguments." ;; finish) $echo \ "Usage: $modename [OPTION]... --mode=finish [LIBDIR]... Complete the installation of libtool libraries. Each LIBDIR is a directory that contains libtool libraries. The commands that this mode executes may require superuser privileges. Use the \`--dry-run' option if you just want to see what would be executed." ;; install) $echo \ "Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... Install executables or libraries. INSTALL-COMMAND is the installation command. The first component should be either the \`install' or \`cp' program. The rest of the components are interpreted as arguments to that command (only BSD-compatible install options are recognized)." ;; link) $echo \ "Usage: $modename [OPTION]... --mode=link LINK-COMMAND... Link object files or libraries together to form another library, or to create an executable program. LINK-COMMAND is a command using the C compiler that you would use to create a program from several object files. The following components of LINK-COMMAND are treated specially: -all-static do not do any dynamic linking at all -avoid-version do not add a version suffix if possible -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) -export-symbols SYMFILE try to export only the symbols listed in SYMFILE -export-symbols-regex REGEX try to export only the symbols matching REGEX -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened -no-fast-install disable the fast-install mode -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries -static do not do any dynamic linking of libtool libraries -version-info CURRENT[:REVISION[:AGE]] specify library version info [each variable defaults to 0] All other options (arguments beginning with \`-') are ignored. Every other argument is treated as a filename. Files ending in \`.la' are treated as uninstalled libtool libraries, other files are standard or library object files. If the OUTPUT-FILE ends in \`.la', then a libtool library is created, only library objects (\`.lo' files) may be specified, and \`-rpath' is required, except when creating a convenience library. If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created using \`ar' and \`ranlib', or on Windows using \`lib'. If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file is created, otherwise an executable program is created." ;; uninstall) $echo \ "Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... Remove libraries from an installation directory. RM is the name of the program to use to delete files associated with each FILE (typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed to RM. If FILE is a libtool library, all the files associated with it are deleted. Otherwise, only FILE itself is deleted using RM." ;; *) $echo "$modename: invalid operation mode \`$mode'" 1>&2 $echo "$help" 1>&2 exit 1 ;; esac echo $echo "Try \`$modename --help' for more information about other modes." exit 0 # Local Variables: # mode:shell-script # sh-indentation:2 # End: